openwrtv4/target/linux/ramips/dts/ALL5002.dts

/dts-v1/;

/include/ "rt3352.dtsi"

/ {
	compatible = "ALL5002", "ralink,rt3352-soc";
	model = "Allnet ALL5002";

	palmbus@10000000 {
		sysc@0 {
			ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
			ralink,gpiomux = "i2c";
			ralink,uartmux = "gpio";
			ralink,wdtmux = <1>;
		};

		gpio0: gpio@600 {
			status = "okay";
		};

		spi@b00 {
			status = "okay";
			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "mx25l25635e";
				reg = <0 0>;
				linux,modalias = "m25p80", "mx25l25635e";
				spi-max-frequency = <10000000>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x30000>;
			read-only;
		};

		partition@30000 {
			label = "u-boot-env";
			reg = <0x30000 0x10000>;
			read-only;
		};

		factory: partition@40000 {
			label = "factory";
			reg = <0x40000 0x10000>;
			read-only;
		};

		partition@50000 {
			label = "firmware";
			reg = <0x50000 0x1fb0000>;
		};
			};
		};
	};

	ethernet@10100000 {
		status = "okay";
	};

	esw@10110000 {
		status = "okay";
		ralink,portmap = <0x3f>;
	};

	wmac@10180000 {
		status = "okay";
	};

	ehci@101c0000 {
		status = "okay";
	};

	ohci@101c1000 {
		status = "okay";
	};

	i2c-gpio {
		compatible = "i2c-gpio";

		gpios = <&gpio0 1 0 &gpio0 2 0>;
		i2c-gpio,delay-us = <10>;

		pcf0: iexp@38 {
			#gpio-cells = <2>;
			compatible = "inxp,pcf8574a";
			reg = <0x38>;
			gpio-controller;
		};

		hwmon@4b {
			compatible = "national,lm92";
			reg = <0x4b>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		ld1 {
			label = "allnet:green:ld1";
			gpios = <&pcf0 0 1>;
		};
		ld2 {
			label = "allnet:green:ld2";
			gpios = <&pcf0 1 1>;
		};
	};
};