52 lines
2 KiB
Diff
52 lines
2 KiB
Diff
|
From 9b799b8a4ecbf560f8fb996e8e5147a8f7b9a1b3 Mon Sep 17 00:00:00 2001
|
||
|
From: Sascha Hauer <s.hauer@pengutronix.de>
|
||
|
Date: Wed, 13 May 2015 10:52:41 +0200
|
||
|
Subject: [PATCH 22/76] dt-bindings: thermal: Add binding document for
|
||
|
Mediatek thermal controller
|
||
|
|
||
|
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
||
|
---
|
||
|
.../bindings/thermal/mediatek-thermal.txt | 36 ++++++++++++++++++++
|
||
|
1 file changed, 36 insertions(+)
|
||
|
create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
|
||
|
|
||
|
--- /dev/null
|
||
|
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
|
||
|
@@ -0,0 +1,36 @@
|
||
|
+* Mediatek Thermal
|
||
|
+
|
||
|
+This describes the device tree binding for the Mediatek thermal controller
|
||
|
+which measures the on-SoC temperatures. This device does not have its own ADC,
|
||
|
+instead it directly controls the AUXADC via AHB bus accesses. For this reason
|
||
|
+this device needs phandles to the AUXADC.
|
||
|
+
|
||
|
+Required properties:
|
||
|
+- compatible: "mediatek,mt8173-thermal"
|
||
|
+- reg: Address range of the thermal controller
|
||
|
+- interrupts: IRQ for the thermal controller
|
||
|
+- clocks, clock-names: Clocks needed for the thermal controller. required
|
||
|
+ clocks are:
|
||
|
+ "therm": Main clock needed for register access
|
||
|
+ "auxadc": The AUXADC clock
|
||
|
+- resets, reset-names: Reference to the reset controller controlling the thermal
|
||
|
+ controller. Required reset-names:
|
||
|
+ "therm": The main reset line
|
||
|
+- auxadc: A phandle to the AUXADC which the thermal controller uses
|
||
|
+- apmixedsys: A phandle to the APMIXEDSYS controller.
|
||
|
+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
|
||
|
+
|
||
|
+Example:
|
||
|
+
|
||
|
+ thermal: thermal@1100b000 {
|
||
|
+ #thermal-sensor-cells = <1>;
|
||
|
+ compatible = "mediatek,mt8173-thermal";
|
||
|
+ reg = <0 0x1100b000 0 0x1000>;
|
||
|
+ interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
|
||
|
+ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
|
||
|
+ clock-names = "therm", "auxadc";
|
||
|
+ resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
|
||
|
+ reset-names = "therm";
|
||
|
+ auxadc = <&auxadc>;
|
||
|
+ apmixedsys = <&apmixedsys>;
|
||
|
+ };
|