openwrtv4/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c

362 lines
8.7 KiB
C
Raw Normal View History

/*
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/byteorder/generic.h>
#include "mtdsplit.h"
/*
* uimage_header itself is only 64B, but it may be prepended with another data.
* Currently the biggest size is for Edimax devices: 20B + 64B
*/
#define MAX_HEADER_LEN 84
#define IH_MAGIC 0x27051956 /* Image Magic Number */
#define IH_NMLEN 32 /* Image Name Length */
#define IH_OS_LINUX 5 /* Linux */
#define IH_TYPE_KERNEL 2 /* OS Kernel Image */
#define IH_TYPE_FILESYSTEM 7 /* Filesystem Image */
/*
* Legacy format image header,
* all data in network byte order (aka natural aka bigendian).
*/
struct uimage_header {
uint32_t ih_magic; /* Image Header Magic Number */
uint32_t ih_hcrc; /* Image Header CRC Checksum */
uint32_t ih_time; /* Image Creation Timestamp */
uint32_t ih_size; /* Image Data Size */
uint32_t ih_load; /* Data Load Address */
uint32_t ih_ep; /* Entry Point Address */
uint32_t ih_dcrc; /* Image Data CRC Checksum */
uint8_t ih_os; /* Operating System */
uint8_t ih_arch; /* CPU architecture */
uint8_t ih_type; /* Image Type */
uint8_t ih_comp; /* Compression Type */
uint8_t ih_name[IH_NMLEN]; /* Image Name */
};
static int
read_uimage_header(struct mtd_info *mtd, size_t offset, u_char *buf,
size_t header_len)
{
size_t retlen;
int ret;
ret = mtd_read(mtd, offset, header_len, &retlen, buf);
if (ret) {
pr_debug("read error in \"%s\"\n", mtd->name);
return ret;
}
if (retlen != header_len) {
pr_debug("short read in \"%s\"\n", mtd->name);
return -EIO;
}
return 0;
}
/**
* __mtdsplit_parse_uimage - scan partition and create kernel + rootfs parts
*
* @find_header: function to call for a block of data that will return offset
* of a valid uImage header if found
*/
static int __mtdsplit_parse_uimage(struct mtd_info *master,
const struct mtd_partition **pparts,
struct mtd_part_parser_data *data,
ssize_t (*find_header)(u_char *buf, size_t len))
{
struct mtd_partition *parts;
u_char *buf;
int nr_parts;
size_t offset;
size_t uimage_offset;
size_t uimage_size = 0;
size_t rootfs_offset;
size_t rootfs_size = 0;
int uimage_part, rf_part;
int ret;
enum mtdsplit_part_type type;
nr_parts = 2;
parts = kzalloc(nr_parts * sizeof(*parts), GFP_KERNEL);
if (!parts)
return -ENOMEM;
buf = vmalloc(MAX_HEADER_LEN);
if (!buf) {
ret = -ENOMEM;
goto err_free_parts;
}
/* find uImage on erase block boundaries */
for (offset = 0; offset < master->size; offset += master->erasesize) {
struct uimage_header *header;
uimage_size = 0;
ret = read_uimage_header(master, offset, buf, MAX_HEADER_LEN);
if (ret)
continue;
ret = find_header(buf, MAX_HEADER_LEN);
if (ret < 0) {
pr_debug("no valid uImage found in \"%s\" at offset %llx\n",
master->name, (unsigned long long) offset);
continue;
}
header = (struct uimage_header *)(buf + ret);
uimage_size = sizeof(*header) + be32_to_cpu(header->ih_size) + ret;
if ((offset + uimage_size) > master->size) {
pr_debug("uImage exceeds MTD device \"%s\"\n",
master->name);
continue;
}
break;
}
if (uimage_size == 0) {
pr_debug("no uImage found in \"%s\"\n", master->name);
ret = -ENODEV;
goto err_free_buf;
}
uimage_offset = offset;
if (uimage_offset == 0) {
uimage_part = 0;
rf_part = 1;
/* find the roots after the uImage */
ret = mtd_find_rootfs_from(master, uimage_offset + uimage_size,
master->size, &rootfs_offset, &type);
if (ret) {
pr_debug("no rootfs after uImage in \"%s\"\n",
master->name);
goto err_free_buf;
}
rootfs_size = master->size - rootfs_offset;
uimage_size = rootfs_offset - uimage_offset;
} else {
rf_part = 0;
uimage_part = 1;
/* check rootfs presence at offset 0 */
ret = mtd_check_rootfs_magic(master, 0, &type);
if (ret) {
pr_debug("no rootfs before uImage in \"%s\"\n",
master->name);
goto err_free_buf;
}
rootfs_offset = 0;
rootfs_size = uimage_offset;
}
if (rootfs_size == 0) {
pr_debug("no rootfs found in \"%s\"\n", master->name);
ret = -ENODEV;
goto err_free_buf;
}
parts[uimage_part].name = KERNEL_PART_NAME;
parts[uimage_part].offset = uimage_offset;
parts[uimage_part].size = uimage_size;
if (type == MTDSPLIT_PART_TYPE_UBI)
parts[rf_part].name = UBI_PART_NAME;
else
parts[rf_part].name = ROOTFS_PART_NAME;
parts[rf_part].offset = rootfs_offset;
parts[rf_part].size = rootfs_size;
vfree(buf);
*pparts = parts;
return nr_parts;
err_free_buf:
vfree(buf);
err_free_parts:
kfree(parts);
return ret;
}
static ssize_t uimage_verify_default(u_char *buf, size_t len)
{
struct uimage_header *header = (struct uimage_header *)buf;
/* default sanity checks */
if (be32_to_cpu(header->ih_magic) != IH_MAGIC) {
pr_debug("invalid uImage magic: %08x\n",
be32_to_cpu(header->ih_magic));
return -EINVAL;
}
if (header->ih_os != IH_OS_LINUX) {
pr_debug("invalid uImage OS: %08x\n",
be32_to_cpu(header->ih_os));
return -EINVAL;
}
if (header->ih_type != IH_TYPE_KERNEL) {
pr_debug("invalid uImage type: %08x\n",
be32_to_cpu(header->ih_type));
return -EINVAL;
}
return 0;
}
static int
mtdsplit_uimage_parse_generic(struct mtd_info *master,
const struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
{
return __mtdsplit_parse_uimage(master, pparts, data,
uimage_verify_default);
}
static struct mtd_part_parser uimage_generic_parser = {
.owner = THIS_MODULE,
.name = "uimage-fw",
.parse_fn = mtdsplit_uimage_parse_generic,
.type = MTD_PARSER_TYPE_FIRMWARE,
};
ar71xx: Add support for Netgear WNR2000v1 This patch adds supports for the WNR2000v1 board with 4MB flash, and produces device-specific factory, rootfs, and sysupgrade files for the WNR2000v1. This board is errorneously claimed as supported on the OpenWRT wiki as AP81, but AP81 image would not work because of APT81 image requiring having 8MB of flash, while WNR2000v1 has only 4MB. The image requires the u-boot bootloader to be modified to fuhry's bootloader first. Short specification: - CPU: Atheros AR9132 - 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps - 4 MB of Flash - 32 MB of RAM - UART header (J1) on board - 1x button Factory/Initial flash instructions: - Set up a TFTP server on your local machine. - Download the uImage for ar71xx-generic and the rootfs image for ar71xx-generic-wnr2000 and save in the tftp server root. - Gain serial access to the router via the UART port (telnetenable over the network only won't work!). - Upgrade the u-boot bootloader to fuhry's version by running the script: http://fuhry.com/b/wnr2000/install-repart.sh - When the router restarts, interrupt u-boot and gain access to u-boot command line. - Repartititon the board and flash initial uImage and rootfs as follow. Commands to type in u-boot: # tells u-boot that we have a tftp server on 192.168.1.10 setenv serverip 192.168.1.10 # tells u-boot that the router should take the address 192.168.1.1 setenv ipaddr 192.168.1.1 # erase the region from 0x050000-0x3f0000 erase 0xbf050000 +0x3A0000 # loads sqfs.bin on TFTP server, and put it to memory address 0x81000000 tftpboot 0x81000000 sqfs.bin # it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ # copy bit by bit 0xZZZZZZ bytes from offset 0x050000 cp.b 0x81000000 0xbf050000 0xZZZZZZ # same to the uImage.bin, write it right next to sqfs.bin # again, 0xYYYYYY is the length that tftpboot reports tftpboot 0x81000000 uImage.bin cp.b 0x81000000 0xbf2a0000 0xYYYYYY # We need to tell the kernel what board it is booting into, and where to find the partitions setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd" # Tell u-boot where to find the uImage setenv bootcmd "bootm 0xbf2a0000" # Tell u-boot to save parameters to the u-boot-env partitions saveenv # Reset the board reset Tested on: - WNR2000v1 board. - Initial flash works. Known bugs: - I don't know why factory image doesn't work on initial flash on stock firmware in u-boot recovery mode while it should. - Sysupgrade does not yet work, if you do -f it will mess up your installation (requiring a reinstall of sqfs and uImage). Signed-off-by: Huan Truong <htruong@tnhh.net>
2016-12-12 21:25:01 +00:00
#define FW_MAGIC_WNR2000V1 0x32303031
#define FW_MAGIC_WNR2000V3 0x32303033
#define FW_MAGIC_WNR2000V4 0x32303034
#define FW_MAGIC_WNR2200 0x32323030
#define FW_MAGIC_WNR612V2 0x32303631
#define FW_MAGIC_WNR1000V2 0x31303031
#define FW_MAGIC_WNR1000V2_VC 0x31303030
#define FW_MAGIC_WNDR3700 0x33373030
#define FW_MAGIC_WNDR3700V2 0x33373031
#define FW_MAGIC_WPN824N 0x31313030
static ssize_t uimage_verify_wndr3700(u_char *buf, size_t len)
{
struct uimage_header *header = (struct uimage_header *)buf;
uint8_t expected_type = IH_TYPE_FILESYSTEM;
switch (be32_to_cpu(header->ih_magic)) {
case FW_MAGIC_WNR612V2:
case FW_MAGIC_WNR1000V2:
case FW_MAGIC_WNR1000V2_VC:
ar71xx: Add support for Netgear WNR2000v1 This patch adds supports for the WNR2000v1 board with 4MB flash, and produces device-specific factory, rootfs, and sysupgrade files for the WNR2000v1. This board is errorneously claimed as supported on the OpenWRT wiki as AP81, but AP81 image would not work because of APT81 image requiring having 8MB of flash, while WNR2000v1 has only 4MB. The image requires the u-boot bootloader to be modified to fuhry's bootloader first. Short specification: - CPU: Atheros AR9132 - 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps - 4 MB of Flash - 32 MB of RAM - UART header (J1) on board - 1x button Factory/Initial flash instructions: - Set up a TFTP server on your local machine. - Download the uImage for ar71xx-generic and the rootfs image for ar71xx-generic-wnr2000 and save in the tftp server root. - Gain serial access to the router via the UART port (telnetenable over the network only won't work!). - Upgrade the u-boot bootloader to fuhry's version by running the script: http://fuhry.com/b/wnr2000/install-repart.sh - When the router restarts, interrupt u-boot and gain access to u-boot command line. - Repartititon the board and flash initial uImage and rootfs as follow. Commands to type in u-boot: # tells u-boot that we have a tftp server on 192.168.1.10 setenv serverip 192.168.1.10 # tells u-boot that the router should take the address 192.168.1.1 setenv ipaddr 192.168.1.1 # erase the region from 0x050000-0x3f0000 erase 0xbf050000 +0x3A0000 # loads sqfs.bin on TFTP server, and put it to memory address 0x81000000 tftpboot 0x81000000 sqfs.bin # it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ # copy bit by bit 0xZZZZZZ bytes from offset 0x050000 cp.b 0x81000000 0xbf050000 0xZZZZZZ # same to the uImage.bin, write it right next to sqfs.bin # again, 0xYYYYYY is the length that tftpboot reports tftpboot 0x81000000 uImage.bin cp.b 0x81000000 0xbf2a0000 0xYYYYYY # We need to tell the kernel what board it is booting into, and where to find the partitions setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd" # Tell u-boot where to find the uImage setenv bootcmd "bootm 0xbf2a0000" # Tell u-boot to save parameters to the u-boot-env partitions saveenv # Reset the board reset Tested on: - WNR2000v1 board. - Initial flash works. Known bugs: - I don't know why factory image doesn't work on initial flash on stock firmware in u-boot recovery mode while it should. - Sysupgrade does not yet work, if you do -f it will mess up your installation (requiring a reinstall of sqfs and uImage). Signed-off-by: Huan Truong <htruong@tnhh.net>
2016-12-12 21:25:01 +00:00
case FW_MAGIC_WNR2000V1:
case FW_MAGIC_WNR2000V3:
case FW_MAGIC_WNR2200:
case FW_MAGIC_WNDR3700:
case FW_MAGIC_WNDR3700V2:
case FW_MAGIC_WPN824N:
break;
case FW_MAGIC_WNR2000V4:
expected_type = IH_TYPE_KERNEL;
break;
default:
return -EINVAL;
}
if (header->ih_os != IH_OS_LINUX ||
header->ih_type != expected_type)
return -EINVAL;
return 0;
}
static int
mtdsplit_uimage_parse_netgear(struct mtd_info *master,
const struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
{
return __mtdsplit_parse_uimage(master, pparts, data,
uimage_verify_wndr3700);
}
static struct mtd_part_parser uimage_netgear_parser = {
.owner = THIS_MODULE,
.name = "netgear-fw",
.parse_fn = mtdsplit_uimage_parse_netgear,
.type = MTD_PARSER_TYPE_FIRMWARE,
};
/**************************************************
* Edimax
**************************************************/
#define FW_EDIMAX_OFFSET 20
#define FW_MAGIC_EDIMAX 0x43535953
static ssize_t uimage_find_edimax(u_char *buf, size_t len)
{
u32 *magic;
if (len < FW_EDIMAX_OFFSET + sizeof(struct uimage_header)) {
pr_err("Buffer too small for checking Edimax header\n");
return -ENOSPC;
}
magic = (u32 *)buf;
if (be32_to_cpu(*magic) != FW_MAGIC_EDIMAX)
return -EINVAL;
if (!uimage_verify_default(buf + FW_EDIMAX_OFFSET, len))
return FW_EDIMAX_OFFSET;
return -EINVAL;
}
static int
mtdsplit_uimage_parse_edimax(struct mtd_info *master,
const struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
{
return __mtdsplit_parse_uimage(master, pparts, data,
uimage_find_edimax);
}
static struct mtd_part_parser uimage_edimax_parser = {
.owner = THIS_MODULE,
.name = "edimax-fw",
.parse_fn = mtdsplit_uimage_parse_edimax,
.type = MTD_PARSER_TYPE_FIRMWARE,
};
/**************************************************
* Init
**************************************************/
static int __init mtdsplit_uimage_init(void)
{
register_mtd_parser(&uimage_generic_parser);
register_mtd_parser(&uimage_netgear_parser);
register_mtd_parser(&uimage_edimax_parser);
return 0;
}
module_init(mtdsplit_uimage_init);