openwrtv4/target/linux/brcm2708/patches-3.18/0112-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch

From 58ee33ad32d4a00735252718f8bac3f7592af6e7 Mon Sep 17 00:00:00 2001
From: jeanleflambeur <catalin.vasile@gmail.com>
Date: Sun, 1 Feb 2015 12:35:38 +0100
Subject: [PATCH 112/114] Fix grabbing lock from atomic context in i2c driver

2 main changes:
- check for timeouts in the bcm2708_bsc_setup function as indicated by this comment:
      /* poll for transfer start bit (should only take 1-20 polls) */
  This implies that the setup function can now fail so account for this everywhere it's called
- Removed the clk_get_rate call from inside the setup function as it locks a mutex and that's not ok since we call it from under a spin lock.

removed dead code and update comment

fixed typo in comment
---
 drivers/i2c/busses/i2c-bcm2708.c | 90 +++++++++++++++++++++++++++++-----------
 1 file changed, 65 insertions(+), 25 deletions(-)

--- a/drivers/i2c/busses/i2c-bcm2708.c
+++ b/drivers/i2c/busses/i2c-bcm2708.c
@@ -68,6 +68,7 @@
 #define BSC_S_TA		0x00000001
 
 #define I2C_TIMEOUT_MS	150
+#define I2C_WAIT_LOOP_COUNT 40
 
 #define DRV_NAME	"bcm2708_i2c"
 
@@ -86,6 +87,7 @@ struct bcm2708_i2c {
 	void __iomem *base;
 	int irq;
 	struct clk *clk;
+	u32 cdiv;
 
 	struct completion done;
 
@@ -109,10 +111,10 @@ static void bcm2708_i2c_init_pinmode(int
 	int pin;
 	u32 *gpio = ioremap(GPIO_BASE, SZ_16K);
 
-        BUG_ON(id != 0 && id != 1);
+	BUG_ON(id != 0 && id != 1);
 	/* BSC0 is on GPIO 0 & 1, BSC1 is on GPIO 2 & 3 */
 	for (pin = id*2+0; pin <= id*2+1; pin++) {
-printk("bcm2708_i2c_init_pinmode(%d,%d)\n", id, pin);
+		printk("bcm2708_i2c_init_pinmode(%d,%d)\n", id, pin);
 		INP_GPIO(pin);		/* set mode to GPIO input first */
 		SET_GPIO_ALT(pin, 0);	/* set mode to ALT 0 */
 	}
@@ -151,16 +153,16 @@ static inline void bcm2708_bsc_fifo_fill
 		bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
 }
 
-static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
+static inline int bcm2708_bsc_setup(struct bcm2708_i2c *bi)
 {
-	unsigned long bus_hz;
 	u32 cdiv, s;
 	u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1;
+	int wait_loops = I2C_WAIT_LOOP_COUNT;
 
-	bus_hz = clk_get_rate(bi->clk);
-	cdiv = bus_hz / baudrate;
-	if (cdiv > 0xffff)
-		cdiv = 0xffff;
+	/* Can't call clk_get_rate as it locks a mutex and here we are spinlocked.
+	 * Use the value that we cached in the probe.
+	 */
+	cdiv = bi->cdiv;
 
 	if (bi->msg->flags & I2C_M_RD)
 		c |= BSC_C_INTR | BSC_C_READ;
@@ -177,17 +179,25 @@ static inline void bcm2708_bsc_setup(str
 		   - Both messages to same slave address
 		   - Write message can fit inside FIFO (16 bytes or less) */
 		if ( (bi->nmsgs > 1) &&
-		    !(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) &&
-		     (bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) {
+			!(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) &&
+			 (bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) {
 			/* Fill FIFO with entire write message (16 byte FIFO) */
-			while (bi->pos < bi->msg->len)
+			while (bi->pos < bi->msg->len) {
 				bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
+			}
 			/* Start write transfer (no interrupts, don't clear FIFO) */
 			bcm2708_wr(bi, BSC_C, BSC_C_I2CEN | BSC_C_ST);
+
 			/* poll for transfer start bit (should only take 1-20 polls) */
 			do {
 				s = bcm2708_rd(bi, BSC_S);
-			} while (!(s & (BSC_S_TA | BSC_S_ERR | BSC_S_CLKT | BSC_S_DONE)));
+			} while (!(s & (BSC_S_TA | BSC_S_ERR | BSC_S_CLKT | BSC_S_DONE)) && --wait_loops >= 0);
+
+			/* did we time out or some error occured? */
+			if (wait_loops < 0 || (s & (BSC_S_ERR | BSC_S_CLKT))) {
+				return -1;
+			}
+
 			/* Send next read message before the write transfer finishes. */
 			bi->nmsgs--;
 			bi->msg++;
@@ -197,6 +207,8 @@ static inline void bcm2708_bsc_setup(str
 		}
 	}
 	bcm2708_wr(bi, BSC_C, c);
+
+	return 0;
 }
 
 static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
@@ -204,13 +216,15 @@ static irqreturn_t bcm2708_i2c_interrupt
 	struct bcm2708_i2c *bi = dev_id;
 	bool handled = true;
 	u32 s;
+	int ret;
 
 	spin_lock(&bi->lock);
 
 	/* we may see camera interrupts on the "other" I2C channel
-           Just return if we've not sent anything */
-        if (!bi->nmsgs || !bi->msg )
+		   Just return if we've not sent anything */
+	if (!bi->nmsgs || !bi->msg) {
 		goto early_exit;
+	}
 
 	s = bcm2708_rd(bi, BSC_S);
 
@@ -218,13 +232,16 @@ static irqreturn_t bcm2708_i2c_interrupt
 		bcm2708_bsc_reset(bi);
 		bi->error = true;
 
+		bi->msg = 0; /* to inform the that all work is done */
+		bi->nmsgs = 0;
 		/* wake up our bh */
 		complete(&bi->done);
 	} else if (s & BSC_S_DONE) {
 		bi->nmsgs--;
 
-		if (bi->msg->flags & I2C_M_RD)
+		if (bi->msg->flags & I2C_M_RD) {
 			bcm2708_bsc_fifo_drain(bi);
+		}
 
 		bcm2708_bsc_reset(bi);
 
@@ -232,8 +249,19 @@ static irqreturn_t bcm2708_i2c_interrupt
 			/* advance to next message */
 			bi->msg++;
 			bi->pos = 0;
-			bcm2708_bsc_setup(bi);
+			ret = bcm2708_bsc_setup(bi);
+			if (ret < 0) {
+				bcm2708_bsc_reset(bi);
+				bi->error = true;
+				bi->msg = 0; /* to inform the that all work is done */
+				bi->nmsgs = 0;
+				/* wake up our bh */
+				complete(&bi->done);
+				goto early_exit;
+			}
 		} else {
+			bi->msg = 0; /* to inform the that all work is done */
+			bi->nmsgs = 0;
 			/* wake up our bh */
 			complete(&bi->done);
 		}
@@ -266,22 +294,33 @@ static int bcm2708_i2c_master_xfer(struc
 	bi->nmsgs = num;
 	bi->error = false;
 
-	bcm2708_bsc_setup(bi);
+	ret = bcm2708_bsc_setup(bi);
 
-	/* unlockig _after_ the setup to avoid races with the interrupt routine */
 	spin_unlock_irqrestore(&bi->lock, flags);
 
-	ret = wait_for_completion_timeout(&bi->done,
-			msecs_to_jiffies(I2C_TIMEOUT_MS));
+	/* check the result of the setup */
+	if (ret < 0)
+	{
+		dev_err(&adap->dev, "transfer setup timed out\n");
+		goto error_timeout;
+	}
+
+	ret = wait_for_completion_timeout(&bi->done, msecs_to_jiffies(I2C_TIMEOUT_MS));
 	if (ret == 0) {
 		dev_err(&adap->dev, "transfer timed out\n");
-		spin_lock_irqsave(&bi->lock, flags);
-		bcm2708_bsc_reset(bi);
-		spin_unlock_irqrestore(&bi->lock, flags);
-		return -ETIMEDOUT;
+		goto error_timeout;
 	}
 
-	return bi->error ? -EIO : num;
+	ret = bi->error ? -EIO : num;
+	return ret;
+
+error_timeout:
+	spin_lock_irqsave(&bi->lock, flags);
+	bcm2708_bsc_reset(bi);
+	bi->msg = 0; /* to inform the interrupt handler that there's nothing else to be done */
+	bi->nmsgs = 0;
+	spin_unlock_irqrestore(&bi->lock, flags);
+	return -ETIMEDOUT;
 }
 
 static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap)
@@ -406,6 +445,7 @@ static int bcm2708_i2c_probe(struct plat
 		cdiv = 0xffff;
 		baudrate = bus_hz / cdiv;
 	}
+	bi->cdiv = cdiv;
 
 	dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %d)\n",
 		pdev->id, (unsigned long)regs->start, irq, baudrate);