KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch

32 lines
1.1 KiB
Diff
Raw Normal View History

ar71xx: add support for linux 4.4 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48563
2016-01-30 13:19:53 +00:00
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
ar71xx: complete support for RB wAP 2nD This patch adds support for the MikroTik RouterBOARD wAP https://mikrotik.com/product/RBwAP2nD Specifications: - SoC: Qualcomm QCA9533 (650 MHz) - RAM: 64 MB - Storage: 16 MB NOR SPI flash - Wireless: built-in QCA9533, 2x2:2 - Ethernet: 1x100M (802.3af/at POE in) This patch adds missing code to fully support wAP. Machfile already contained configuration for wAP 2nD but device specific configuration like LEDs etc. was missing. Installation: 1. Login to the Mikrotik WebUI to backup your licence keys 2. Setup a DHCP/BOOTP server with: - DHCP-Option 66 (TFTP server name) pointing to a local TFTP server within the same subnet of the DHCP range - DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. Connect the port labeled internet to your local network 4. Keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP server. Login as root/without password to the started LEDE via SSH listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: - rbcfg set boot_protocol bootp - rbcfg set boot_device ethnand - rbcfg apply Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall. Signed-off-by: Robert Marko <robimarko@gmail.com>
2017-10-28 10:30:39 +00:00
@@ -136,6 +136,28 @@ void __init prom_init(void)
ar71xx: add support for linux 4.4 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48563
2016-01-30 13:19:53 +00:00
initrd_end = initrd_start + fw_getenvl("initrd_size");
}
#endif
+
+ if (strstr(arcs_cmdline, "board=750Gr3") ||
ar71xx: enable serial console on mikrotik devices This patch enables the serial console on some Mikrotik devices (RB450, RB450G, RB493G, RB750UP). Signed-off-by: João Chaínho <joaochainho@gmail.com>
2016-11-17 22:15:42 +00:00
+ strstr(arcs_cmdline, "board=750i") ||
ar71xx: add new SPI NOR RB devices to the list of serial-enable patch Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-02-10 15:53:34 +00:00
+ strstr(arcs_cmdline, "board=750-hb") ||
ar71xx: enable serial console on Mikrotik RB411/RB433 This patch adds support for serial console on Mikrotik RB411 and RB433 series devices. Signed-off-by: David Varga <duvi@duvinet.hu> [picked from FS#377] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-10 18:12:34 +00:00
+ strstr(arcs_cmdline, "board=411") ||
+ strstr(arcs_cmdline, "board=433") ||
ar71xx: Add more boards to the routerboard serial detection patch This patch enables serial console on the 435 series and the 953gs. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-02-19 16:19:08 +00:00
+ strstr(arcs_cmdline, "board=435") ||
ar71xx: enable serial console on mikrotik devices This patch enables the serial console on some Mikrotik devices (RB450, RB450G, RB493G, RB750UP). Signed-off-by: João Chaínho <joaochainho@gmail.com>
2016-11-17 22:15:42 +00:00
+ strstr(arcs_cmdline, "board=450") ||
+ strstr(arcs_cmdline, "board=493") ||
ar71xx: add support for linux 4.4 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48563
2016-01-30 13:19:53 +00:00
+ strstr(arcs_cmdline, "board=951G") ||
ar71xx: add new SPI NOR RB devices to the list of serial-enable patch Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-02-10 15:53:34 +00:00
+ strstr(arcs_cmdline, "board=H951L") ||
+ strstr(arcs_cmdline, "board=952-hb") ||
ar71xx: Add more boards to the routerboard serial detection patch This patch enables serial console on the 435 series and the 953gs. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-02-19 16:19:08 +00:00
+ strstr(arcs_cmdline, "board=953gs") ||
ar71xx: add support for MikroTik hAP ac This patch adds initial support for the MikroTik RouterBOARD hAP ac (RB962UiGS-5HacT2HnT). All functions are supported except: -SFP cage (eth1) is not working -WLAN LEDs are not working Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2017-03-17 04:00:33 +00:00
+ strstr(arcs_cmdline, "board=962") ||
ar71xx: add support for RB LHG 5nD This patch adds support for the MikroTik RouterBOARD LHG 5 https://routerboard.com/RBLHG-5nD Specifications: - SoC: Atheros AR9344 (600MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin AR9344 5GHz, 2x2:2 - Ethernet: 1x100M Initial flash via initramfs, like all other RB devices. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-03-06 22:06:13 +00:00
+ strstr(arcs_cmdline, "board=lhg") ||
ar71xx: add new SPI NOR RB devices to the list of serial-enable patch Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-02-10 15:53:34 +00:00
+ strstr(arcs_cmdline, "board=map-hb") ||
ar71xx: complete support for RB wAP 2nD This patch adds support for the MikroTik RouterBOARD wAP https://mikrotik.com/product/RBwAP2nD Specifications: - SoC: Qualcomm QCA9533 (650 MHz) - RAM: 64 MB - Storage: 16 MB NOR SPI flash - Wireless: built-in QCA9533, 2x2:2 - Ethernet: 1x100M (802.3af/at POE in) This patch adds missing code to fully support wAP. Machfile already contained configuration for wAP 2nD but device specific configuration like LEDs etc. was missing. Installation: 1. Login to the Mikrotik WebUI to backup your licence keys 2. Setup a DHCP/BOOTP server with: - DHCP-Option 66 (TFTP server name) pointing to a local TFTP server within the same subnet of the DHCP range - DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. Connect the port labeled internet to your local network 4. Keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP server. Login as root/without password to the started LEDE via SSH listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: - rbcfg set boot_protocol bootp - rbcfg set boot_device ethnand - rbcfg apply Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall. Signed-off-by: Robert Marko <robimarko@gmail.com>
2017-10-28 10:30:39 +00:00
+ strstr(arcs_cmdline, "board=wap-hb") ||
ar71xx: add support for linux 4.4 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48563
2016-01-30 13:19:53 +00:00
+ strstr(arcs_cmdline, "board=2011L") ||
ar71xx: Enable RB2011 TTY Enables TTY on the Mikrotik RouterBoard RB2011*R* Signed-off-by: Arvid E. Picciani <aep@exys.org>
2017-02-14 11:29:02 +00:00
+ strstr(arcs_cmdline, "board=2011r") ||
ar71xx: add support for linux 4.4 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48563
2016-01-30 13:19:53 +00:00
+ strstr(arcs_cmdline, "board=711Gr100") ||
+ strstr(arcs_cmdline, "board=922gs"))
+ ath79_prom_append_cmdline("console", "ttyS0,115200");
}
void __init prom_free_prom_memory(void)
Reference in a new issue Copy permalink