openwrtv4/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ASL56026.dts

174 lines
2.8 KiB
Text
Raw Normal View History

/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/mips/lantiq_rcu_gphy.h>
/ {
compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
model = "BT OpenReach VDSL Modem";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_green;
led-dsl = &dsl;
};
memory@0 {
reg = <0x0 0x2000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl: dsl {
label = "asl56026:green:dsl";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
/* power-* is a bicolour led */
power_green: power_green {
label = "asl56026:green:power";
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power_red: power_red {
label = "asl56026:red:power";
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
power_led_blink {
gpio-export,name = "power_led_blink";
gpio-export,output = <0>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
lantiq,switch;
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <3>;
phy-mode = "mii";
phy-handle = <&phy14>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
reg = <0>;
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy14: ethernet-phy@14 {
reg = <0x14>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
};
};
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_FE>;
};
&gphy1 {
lantiq,gphy-mode = <GPHY_MODE_FE>;
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
};
};
&localbus {
nor@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x0800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
};
partition@30000 {
label = "uboot_env";
reg = <0x30000 0x10000>;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x750000>;
};
partition@790000 {
label = "ddrconfig";
reg = <0x790000 0x70000>;
read-only;
};
};
};
};