lantiq: add Allnet ALL0333CJ support
This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ.
Specifications:
- SoC: Amazon-SE
- RAM: 16MB
- Storage: 4MB NOR FLash
- LEDs: Power, Ethernet, DSL (Sync)
- Buttons: 1x Reset Button (not currently supported, will be done)
- 1x Ethernet-Port: 1x RJ45 10/100BaseTX
- 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+)
Installation:
- can be done via telnet+tftp or serial console
- default passwords:
- via telnet (root:admin)
- via webinterface http://172.16.1.254:8235/ (admin:coolwhite)
Installation via telnet / tftp:
host: # your own host must have an tftpd daemon, then do this:
host: ifconfig eth0:172 172.16.1.1 up
host: # telnet to allnet modem, root:admin
host: telnet 172.16.1.254
modem: # kill this daemon, it spams your console
modem: killall dsl_cpe_control
modem: # change to some place in ram:
modem: cd /ramdisk/tftp_upload
modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage
modem: tftp -g -r uImage 172.16.1.1
modem: # load these extra tools from your tftpd via:
modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz
modem: tftp -g -r flashwrite 172.16.1.1
modem: tftp -g -r fw_setenv 172.16.1.1
modem: tftp -g -r fw.conf 172.16.1.1
modem: ln -s fw_setenv fw_printenv
modem: chmod +x *
modem: ./fw_setenv disable_recovery y
modem: ./fw_setenv kernel_addr 0xb0010000
modem: ./flashwrite /dev/mtd/1 uImage 0
Installation via serial line at uboot:
uboot: # erase everything exept bootloader
uboot: protect on b0000000 +10000; protect on b03f0000 +10000
uboot: erase all
uboot: # get new firmware via tftp:
uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000
uboot: # copy to flash:
uboot: cp.b 0x80100000 $(kernel_addr) $(filesize)
uboot: # disable proprietary image checking:
uboot: setenv disable_recovery=y; saveenv
uboot: # reboot with LEDE ;)
uboot: reset
Ethernet works as expected, DSL syncronization does not work properly
currently, I am working on this issue.
Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
2017-02-26 20:29:37 +00:00
|
|
|
/dts-v1/;
|
|
|
|
|
|
|
|
#include "amazonse.dtsi"
|
|
|
|
|
|
|
|
/ {
|
2017-04-08 08:33:53 +00:00
|
|
|
compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase";
|
2017-04-08 09:40:07 +00:00
|
|
|
model = "Allnet ALL0333CJ DSL Modem";
|
lantiq: add Allnet ALL0333CJ support
This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ.
Specifications:
- SoC: Amazon-SE
- RAM: 16MB
- Storage: 4MB NOR FLash
- LEDs: Power, Ethernet, DSL (Sync)
- Buttons: 1x Reset Button (not currently supported, will be done)
- 1x Ethernet-Port: 1x RJ45 10/100BaseTX
- 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+)
Installation:
- can be done via telnet+tftp or serial console
- default passwords:
- via telnet (root:admin)
- via webinterface http://172.16.1.254:8235/ (admin:coolwhite)
Installation via telnet / tftp:
host: # your own host must have an tftpd daemon, then do this:
host: ifconfig eth0:172 172.16.1.1 up
host: # telnet to allnet modem, root:admin
host: telnet 172.16.1.254
modem: # kill this daemon, it spams your console
modem: killall dsl_cpe_control
modem: # change to some place in ram:
modem: cd /ramdisk/tftp_upload
modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage
modem: tftp -g -r uImage 172.16.1.1
modem: # load these extra tools from your tftpd via:
modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz
modem: tftp -g -r flashwrite 172.16.1.1
modem: tftp -g -r fw_setenv 172.16.1.1
modem: tftp -g -r fw.conf 172.16.1.1
modem: ln -s fw_setenv fw_printenv
modem: chmod +x *
modem: ./fw_setenv disable_recovery y
modem: ./fw_setenv kernel_addr 0xb0010000
modem: ./flashwrite /dev/mtd/1 uImage 0
Installation via serial line at uboot:
uboot: # erase everything exept bootloader
uboot: protect on b0000000 +10000; protect on b03f0000 +10000
uboot: erase all
uboot: # get new firmware via tftp:
uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000
uboot: # copy to flash:
uboot: cp.b 0x80100000 $(kernel_addr) $(filesize)
uboot: # disable proprietary image checking:
uboot: setenv disable_recovery=y; saveenv
uboot: # reboot with LEDE ;)
uboot: reset
Ethernet works as expected, DSL syncronization does not work properly
currently, I am working on this issue.
Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
2017-02-26 20:29:37 +00:00
|
|
|
|
|
|
|
chosen {
|
|
|
|
bootargs = "console=ttyLTQ0,115200";
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
led-boot = &power;
|
|
|
|
led-failsafe = &power;
|
|
|
|
led-running = &power;
|
|
|
|
|
|
|
|
led-dsl = &dsl;
|
|
|
|
led-internet = &online_green;
|
|
|
|
};
|
|
|
|
|
|
|
|
};
|
|
|
|
|
|
|
|
memory@0 {
|
|
|
|
reg = <0x0 0x1000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
fpi@b0000000 {
|
|
|
|
etop@E180000 {
|
|
|
|
phy-mode = "mii";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
fpi@10000000 {
|
|
|
|
gpio: pinmux@E100B10 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
|
|
|
|
state_default: pinmux {
|
|
|
|
asc {
|
|
|
|
lantiq,groups = "asc";
|
|
|
|
lantiq,function = "asc";
|
|
|
|
};
|
|
|
|
keys_in {
|
|
|
|
lantiq,pins = "io0",/* "io25", */"io29";
|
|
|
|
lantiq,pull = <2>;
|
|
|
|
lantiq,open-drain = <1>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
localbus@0 {
|
|
|
|
nor-boot@0 {
|
|
|
|
compatible = "lantiq,nor";
|
|
|
|
bank-width = <2>;
|
|
|
|
reg = <0 0x0 0x400000>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
|
|
partitions {
|
|
|
|
compatible = "fixed-partitions";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
|
|
partition@0 {
|
|
|
|
label = "uboot";
|
|
|
|
reg = <0x00000 0x10000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@10000 {
|
|
|
|
label = "firmware";
|
|
|
|
reg = <0x10000 0x3ef200>;
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@3ff200 {
|
|
|
|
label = "uboot_env";
|
|
|
|
reg = <0x3ff200 0xc00>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@3ffe00 {
|
|
|
|
label = "dummy_bits";
|
|
|
|
reg = <0x3ffe00 0x200>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
gpio-leds {
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
|
|
|
|
/* power led: red=off, green=on */
|
|
|
|
power: power {
|
|
|
|
label = "all0333cj:green:power";
|
|
|
|
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
|
|
|
default-state = "keep";
|
|
|
|
};
|
|
|
|
|
|
|
|
lan: lan {
|
|
|
|
label = "all0333cj:green:lan";
|
|
|
|
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
|
|
|
};
|
|
|
|
|
|
|
|
dsl: dsl {
|
|
|
|
label = "all0333cj:green:dsl";
|
|
|
|
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
|
|
|
};
|
|
|
|
|
|
|
|
online_green: online {
|
|
|
|
label = "all0333cj:green:online";
|
|
|
|
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
|
|
|
};
|
|
|
|
online_red {
|
|
|
|
label = "all0333cj:red:online";
|
|
|
|
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|