openwrtv4/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar7242.dtsi"

/ {
	compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
	model = "Buffalo WZR-HP-G450H";

	keys {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;

		poll-interval = <20>;
		usb {
			linux,code = <BTN_2>;
			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

		reset {
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

		movie_engine {
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
			debounce-interval = <60>;
		};

		aoss {
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

		router_off {
			linux,code = <BTN_5>;
			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
			debounce-interval = <60>;
		};

	};

	leds {
		compatible = "gpio-leds";
		security {
			label = "buffalo:orange:security";
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
		};

		diag {
			label = "buffalo:red:diag";
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
		};
	};

	gpio-export {
		compatible = "gpio-export";
		#size-cells = <0>;

		gpio_usb_power {
			gpio-export,name = "wzr-hp-g450h:usb-power";
			gpio-export,output = <1>;
			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
		};
	};
};

&mdio0 {
	status = "okay";
	phy-mask = <0x1>;

	phy0: ethernet-phy@0 {
		reg = <0>;
		phy-mode = "rgmii";
	};
};

&eth0 {
	status = "okay";

	phy-mode = "rgmii";
	pll-data = <0x62000000 0 0>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&uart {
	status = "okay";
};

&usb_phy {
	status = "okay";
};

&usb {
	status = "okay";
};

&pcie {
	status = "okay";

	wifi@0 {
		reg = <0x0000 0 0 0 0>;
		qca,no-eeprom;
	};
};