openwrtv4/target/linux/imx6/patches-3.18/202-net-igb-add-i210-i211-support-for-phy-read-write.patch

Author: Tim Harvey <tharvey@gateworks.com>
Date:   Thu May 15 00:12:26 2014 -0700

    net: igb: add i210/i211 support for phy read/write
    
    The i210/i211 uses the MDICNFG register for the phy address instead of the
    MDIC register.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>

--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -135,7 +135,7 @@ out:
 s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, mdic = 0;
+	u32 i, mdicnfg, mdic = 0;
 	s32 ret_val = 0;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
@@ -148,11 +148,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
 	 * Control register.  The MAC will take care of interfacing with the
 	 * PHY to retrieve the desired data.
 	 */
-	mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-		(phy->addr << E1000_MDIC_PHY_SHIFT) |
-		(E1000_MDIC_OP_READ));
+	switch (hw->mac.type) {
+	case e1000_i210:
+	case e1000_i211:
+		mdicnfg = rd32(E1000_MDICNFG);
+		mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+		mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
+		wr32(E1000_MDICNFG, mdicnfg);
+		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+			(E1000_MDIC_OP_READ));
+		break;
+	default:
+		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+			(phy->addr << E1000_MDIC_PHY_SHIFT) |
+			(E1000_MDIC_OP_READ));
+		break;
+	}
 
 	wr32(E1000_MDIC, mdic);
+	wrfl();
 
 	/* Poll the ready bit to see if the MDI read completed
 	 * Increasing the time out as testing showed failures with
@@ -177,6 +191,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
 	*data = (u16) mdic;
 
 out:
+	switch (hw->mac.type) {
+		/* restore MDICNFG to have phy's addr */
+		case e1000_i210:
+		case e1000_i211:
+			mdicnfg = rd32(E1000_MDICNFG);
+			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+			mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
+			wr32(E1000_MDICNFG, mdicnfg);
+			break;
+		default:
+			break;
+	}
 	return ret_val;
 }
 
@@ -191,7 +217,7 @@ out:
 s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, mdic = 0;
+	u32 i, mdicnfg, mdic = 0;
 	s32 ret_val = 0;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
@@ -204,12 +230,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
 	 * Control register.  The MAC will take care of interfacing with the
 	 * PHY to retrieve the desired data.
 	 */
-	mdic = (((u32)data) |
-		(offset << E1000_MDIC_REG_SHIFT) |
-		(phy->addr << E1000_MDIC_PHY_SHIFT) |
-		(E1000_MDIC_OP_WRITE));
+	switch (hw->mac.type) {
+		case e1000_i210:
+		case e1000_i211:
+			mdicnfg = rd32(E1000_MDICNFG);
+			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+			mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
+			wr32(E1000_MDICNFG, mdicnfg);
+			mdic = (((u32)data) |
+				(offset << E1000_MDIC_REG_SHIFT) |
+				(E1000_MDIC_OP_WRITE));
+			break;
+		default:
+			mdic = (((u32)data) |
+				(offset << E1000_MDIC_REG_SHIFT) |
+				(phy->addr << E1000_MDIC_PHY_SHIFT) |
+				(E1000_MDIC_OP_WRITE));
+			break;
+	}
 
 	wr32(E1000_MDIC, mdic);
+	wrfl();
 
 	/* Poll the ready bit to see if the MDI read completed
 	 * Increasing the time out as testing showed failures with
@@ -233,6 +274,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
 	}
 
 out:
+	switch (hw->mac.type) {
+		/* restore MDICNFG to have phy's addr */
+		case e1000_i210:
+		case e1000_i211:
+			mdicnfg = rd32(E1000_MDICNFG);
+			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+			mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
+			wr32(E1000_MDICNFG, mdicnfg);
+			break;
+		default:
+			break;
+	}
 	return ret_val;
 }