openwrtv4/target/linux/ramips/dts/DIR-860L-B1.dts

/dts-v1/;

#include "mt7621.dtsi"

#include <dt-bindings/input/input.h>

/ {
	compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
	model = "D-Link DIR-860L B1";

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x8000000>;
	};

	chosen {
		bootargs = "console=ttyS0,57600";
	};

	gpio-leds {
		compatible = "gpio-leds";

		power {
			label = "dir-860l-b1:orange:power";
			gpios = <&gpio0 13 1>;
		};

		power2 {
			label = "dir-860l-b1:green:power";
			gpios = <&gpio0 15 1>;
		};

		net {
			label = "dir-860l-b1:orange:net";
			gpios = <&gpio0 14 1>;
		};

		net2 {
			label = "dir-860l-b1:green:net";
			gpios = <&gpio0 16 1>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio0 7 1>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&gpio0 18 1>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};
};

&spi0 {
	status = "okay";

	m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;
		m25p,chunked-io = <32>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x30000>;
			read-only;
		};

		partition@30000 {
			label = "u-boot-env";
			reg = <0x30000 0x4000>;
			read-only;
		};

		radio: partition@34000 {
			label = "radio";
			reg = <0x34000 0x4000>;
			read-only;
		};

		factory: partition@38000 {
			label = "factory";
			reg = <0x38000 0x8000>;
			read-only;
		};

		partition@40000 {
			label = "defaults";
			reg = <0x40000 0x10000>;
			read-only;
		};

		partition@50000 {
			label = "firmware";
			reg = <0x50000 0xfb0000>;
		};
	};
};

&pcie {
	status = "okay";

	pcie0 {
		mt76@0,0 {
			reg = <0x0000 0 0 0 0>;
			device_type = "pci";
			mediatek,mtd-eeprom = <&radio 0x2000>;
			ieee80211-freq-limit = <5000000 6000000>;
		};
	};

	pcie1 {
		mt76@1,0 {
			reg = <0x0000 0 0 0 0>;
			device_type = "pci";
			mediatek,mtd-eeprom = <&radio 0>;
			ieee80211-freq-limit = <2400000 2500000>;
		};
	};
};

&pinctrl {
	state_default: pinctrl0 {
		gpio {
			ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
			ralink,function = "gpio";
		};
	};
};