openwrtv4/target/linux/bcm53xx/patches-4.4/047-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch

From 5be82d0475941dc96eeeee3c754baf48365f7bf5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 15 Mar 2017 18:03:27 +0100
Subject: [PATCH] ARM: dts: BCM5301X: Specify serial console params in dtsi
 files
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

So far every Northstar device we have seen was using the same serial
console params (115200n8). It probably make the most sense to put it in
some proper dtsi files instead of repeating over and over for every
single device. As different boards may use different bootloaders it
seems the safest idea is to use board specific dtsi files.

Just in case some vendor decides to use different UART (parameters) this
can be always easily overwritten.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/bcm4708.dtsi    | 8 ++++++++
 arch/arm/boot/dts/bcm47081.dtsi   | 8 ++++++++
 arch/arm/boot/dts/bcm5301x.dtsi   | 4 ----
 arch/arm/boot/dts/bcm94708.dts    | 8 --------
 arch/arm/boot/dts/bcm94709.dts    | 8 --------
 arch/arm/boot/dts/bcm953012er.dts | 8 --------
 arch/arm/boot/dts/bcm953012hr.dts | 5 -----
 arch/arm/boot/dts/bcm953012k.dts  | 4 ----
 8 files changed, 16 insertions(+), 37 deletions(-)

--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -12,6 +12,14 @@
 / {
 	compatible = "brcm,bcm4708";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -22,6 +22,14 @@
 / {
 	compatible = "brcm,bcm47081";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -18,10 +18,6 @@
 / {
 	interrupt-parent = <&gic>;
 
-	chosen {
-		stdout-path = &uart0;
-	};
-
 	chipcommonA {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x00001000>;
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -38,14 +38,6 @@
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory {
 		reg = <0x00000000 0x08000000>;
 	};
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -38,14 +38,6 @@
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory {
 		reg = <0x00000000 0x08000000>;
 	};
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -39,14 +39,6 @@
 	model = "NorthStar Enterprise Router (BCM953012ER)";
 	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
 
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory {
 		reg = <0x00000000 0x8000000>;
 	};
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -40,16 +40,11 @@
 	compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
 
 	aliases {
-		serial0 = &uart0;
 		ethernet0 = &gmac0;
 		ethernet1 = &gmac1;
 		ethernet2 = &gmac2;
 	};
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory@80000000 {
 		reg = <0x80000000 0x10000000>;
 	};
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -43,10 +43,6 @@
 		serial1 = &uart1;
 	};
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory {
 		reg = <0x00000000 0x10000000>;
 	};