openwrtv4/target/linux/ramips/dts/R6120.dts

149 lines
2.5 KiB
Text
Raw Normal View History

/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,r6120", "mediatek,mt7628an-soc";
model = "Netgear AC1200 R6120";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
lan {
label = "r6120:green:lan";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
led_power: power {
label = "r6120:green:power";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
wlan {
label = "r6120:green:wlan2g";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
wlan_orange {
label = "r6120:orange:wlan2g";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
wlan5 {
label = "r6120:green:wlan5g";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
wlan5_orange {
label = "r6120:orange:wlan5g";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "p0led_an", "p1led_an", "p2led_an",
"p3led_an", "p4led_an", "wdt", "wled_an";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x20000>;
read-only;
};
nvram: partition@60000 {
label = "nvram";
reg = <0x60000 0x30000>;
read-only;
};
partition@90000 {
label = "firmware";
reg = <0x90000 0xf60000>;
};
partition@ff0000 {
label = "reserved";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-mac-address = <&nvram 0x100b0>;
mediatek,mtd-eeprom = <&factory 0x20000>;
};
&ethernet {
mtd-mac-address = <&nvram 0x100b0>;
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x28000>;
ieee80211-freq-limit = <5000000 6000000>;
mtd-mac-address = <&nvram 0x100b0>;
mtd-mac-address-increment = <(2)>;
};
};