openwrtv4/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh

#
# Copyright (C) 2016 lede-project.org
#

zyxel_get_rootfs() {
	local rootfsdev

	if read cmdline < /proc/cmdline; then
		case "$cmdline" in
			*root=*)
				rootfsdev="${cmdline##*root=}"
				rootfsdev="${rootfsdev%% *}"
			;;
		esac

		echo "${rootfsdev}"
	fi
}

zyxel_do_flash() {
	local tar_file=$1
	local kernel=$2
	local rootfs=$3
	local dualflagmtd=$4

	# keep sure its unbound
	losetup --detach-all || {
		echo Failed to detach all loop devices. Skip this try.
		reboot -f
	}

	# use the first found directory in the tar archive
	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
	board_dir=${board_dir%/}

	echo "flashing kernel to $kernel"
	tar xf $tar_file ${board_dir}/kernel -O >$kernel

	echo "flashing rootfs to ${rootfs}"
	tar xf $tar_file ${board_dir}/root -O >"${rootfs}"

	# a padded rootfs is needed for overlay fs creation
	local offset=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
	[ $offset -lt 65536 ] && {
		echo Wrong size for rootfs: $offset
		sleep 10
		reboot -f
	}

	# Mount loop for rootfs_data
	local loopdev="$(losetup -f)"
	losetup -o $offset $loopdev $rootfs || {
		echo "Failed to mount looped rootfs_data."
		sleep 10
		reboot -f
	}

	echo "Format new rootfs_data at position ${offset}."
	mkfs.ext4 -F -L rootfs_data $loopdev
	mkdir /tmp/new_root
	mount -t ext4 $loopdev /tmp/new_root && {
		echo "Saving config to rootfs_data at position ${offset}."
		cp -v /tmp/sysupgrade.tgz /tmp/new_root/
		umount /tmp/new_root
	}

	# flashing successful, toggle the dualflag
	case "$rootfs" in
		"/dev/mmcblk0p5")
			printf "\xff" >$dualflagmtd
			;;
		"/dev/mmcblk0p8")
			printf "\x01" >$dualflagmtd
			;;
	esac

	# Cleanup
	losetup -d $loopdev >/dev/null 2>&1
	sync
	umount -a
	reboot -f
}

zyxel_do_upgrade() {
	local tar_file="$1"
	local board=$(board_name)
	local rootfs="$(zyxel_get_rootfs)"
	local kernel=

	[ -b "${rootfs}" ] || return 1
	case "$board" in
	zyxel,nbg6817)
		local dualflagmtd="$(find_mtd_part 0:DUAL_FLAG)"
		[ -b $dualflagmtd ] || return 1

		case "$rootfs" in
			"/dev/mmcblk0p5")
				# booted from the primary partition set
				# write to the alternative set
				kernel="/dev/mmcblk0p7"
				rootfs="/dev/mmcblk0p8"
			;;
			"/dev/mmcblk0p8")
				# booted from the alternative partition set
				# write to the primary set
				kernel="/dev/mmcblk0p4"
				rootfs="/dev/mmcblk0p5"
			;;
			*)
				return 1
			;;
		esac
		;;
	*)
		return 1
		;;
	esac

	zyxel_do_flash $tar_file $kernel $rootfs $dualflagmtd

	return 0
}