openwrtv4/target/linux/ramips/patches-3.10/0019-USB-add-OHCI-EHCI-OF-binding.patch

187 lines
5 KiB
Diff
Raw Normal View History

From 40b9d3026ed0b3bcd59f90391195df5b2adabad2 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 14 Jul 2013 23:34:53 +0200
Subject: [PATCH 19/33] USB: add OHCI/EHCI OF binding
based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/Kconfig | 2 ++
drivers/usb/Makefile | 3 ++-
drivers/usb/host/ehci-platform.c | 19 +++++++++++++++----
drivers/usb/host/ohci-platform.c | 37 ++++++++++++++++++++++++++++++++-----
4 files changed, 51 insertions(+), 10 deletions(-)
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -24,6 +24,8 @@ choice
config SOC_MT7620
bool "MT7620"
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
select HW_HAS_PCI
endchoice
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_USB_DWC3) += dwc3/
obj-$(CONFIG_USB_MON) += mon/
+obj-$(CONFIG_USB_PHY) += phy/
+
obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
@@ -44,7 +46,6 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB_PHY) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -29,6 +29,8 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/otg.h>
#include "ehci.h"
@@ -118,6 +120,15 @@ static int ehci_platform_probe(struct pl
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
+#ifdef CONFIG_USB_PHY
+ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
+ if (!IS_ERR_OR_NULL(hcd->phy)) {
+ otg_set_host(hcd->phy->otg,
+ &hcd->self);
+ usb_phy_init(hcd->phy);
+ }
+#endif
+
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
@@ -155,6 +166,9 @@ static int ehci_platform_remove(struct p
if (pdata == &ehci_platform_defaults)
dev->dev.platform_data = NULL;
+ if (pdata == &ehci_platform_defaults)
+ dev->dev.platform_data = NULL;
+
return 0;
}
@@ -199,9 +213,8 @@ static int ehci_platform_resume(struct d
#define ehci_platform_resume NULL
#endif /* CONFIG_PM */
-static const struct of_device_id vt8500_ehci_ids[] = {
- { .compatible = "via,vt8500-ehci", },
- { .compatible = "wm,prizm-ehci", },
+static const struct of_device_id ralink_ehci_ids[] = {
+ { .compatible = "ralink,rt3xxx-ehci", },
{}
};
@@ -225,7 +238,7 @@ static struct platform_driver ehci_platf
.owner = THIS_MODULE,
.name = "ehci-platform",
.pm = &ehci_platform_pm_ops,
- .of_match_table = of_match_ptr(vt8500_ehci_ids),
+ .of_match_table = of_match_ptr(ralink_ehci_ids),
}
};
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -16,6 +16,10 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/usb/ohci_pdriver.h>
+#include <linux/dma-mapping.h>
+#include <linux/of.h>
+
+static struct usb_ohci_pdata ohci_platform_defaults;
static int ohci_platform_reset(struct usb_hcd *hcd)
{
@@ -88,14 +92,22 @@ static int ohci_platform_probe(struct pl
{
struct usb_hcd *hcd;
struct resource *res_mem;
- struct usb_ohci_pdata *pdata = dev->dev.platform_data;
+ struct usb_ohci_pdata *pdata;
int irq;
int err = -ENOMEM;
- if (!pdata) {
- WARN_ON(1);
- return -ENODEV;
- }
+ /*
+ * use reasonable defaults so platforms don't have to provide these.
+ * with DT probing on ARM, none of these are set.
+ */
+ if (!dev->dev.platform_data)
+ dev->dev.platform_data = &ohci_platform_defaults;
+ if (!dev->dev.dma_mask)
+ dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+ if (!dev->dev.coherent_dma_mask)
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ pdata = dev->dev.platform_data;
if (usb_disabled())
return -ENODEV;
@@ -128,6 +140,12 @@ static int ohci_platform_probe(struct pl
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
+#ifdef CONFIG_USB_PHY
+ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
+ if (!IS_ERR_OR_NULL(hcd->phy))
+ usb_phy_init(hcd->phy);
+#endif
+
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
@@ -162,6 +180,9 @@ static int ohci_platform_remove(struct p
if (pdata->power_off)
pdata->power_off(dev);
+ if (pdata == &ohci_platform_defaults)
+ dev->dev.platform_data = NULL;
+
return 0;
}
@@ -201,6 +222,11 @@ static int ohci_platform_resume(struct d
#define ohci_platform_resume NULL
#endif /* CONFIG_PM */
+static const struct of_device_id ralink_ohci_ids[] = {
+ { .compatible = "ralink,rt3xxx-ohci", },
+ {}
+};
+
static const struct platform_device_id ohci_platform_table[] = {
{ "ohci-platform", 0 },
{ }
@@ -221,5 +247,6 @@ static struct platform_driver ohci_platf
.owner = THIS_MODULE,
.name = "ohci-platform",
.pm = &ohci_platform_pm_ops,
+ .of_match_table = of_match_ptr(ralink_ohci_ids),
}
};