KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/archs38/image/Makefile

69 lines
1.8 KiB
Makefile
Raw Normal View History

linux: add support of Synopsys ARCHS38-based boards This patch introduces support of new boards with ARC HS38 cores. ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA. As with ARC770 we're addind support for 2 boards for now: [1] Synopsys SDP board (AXS103) This is the same base-board as in AXS101 but with FPGA-based CPU-tile where ARCHs38 core is implemented. [2] nSIM Again this is the same simulation engine but configured for new instruction set and features of new CPU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48740
2016-02-18 08:22:32 +00:00
#
# Copyright (C) 2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
# On ARC initramfs is put before entry point and so entry point moves
# in memory from build to built. Thus we need to extract EP from vmlinux
# every time before generation of uImage.
define Build/calculate-ep
$(eval KERNEL_ENTRY=$(shell $(KERNEL_CROSS)readelf -h $(LINUX_DIR)/vmlinux | grep "Entry point address" | grep -o 0x.*))
endef
linux: add support of Synopsys ARCHS38-based boards This patch introduces support of new boards with ARC HS38 cores. ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA. As with ARC770 we're addind support for 2 boards for now: [1] Synopsys SDP board (AXS103) This is the same base-board as in AXS101 but with FPGA-based CPU-tile where ARCHs38 core is implemented. [2] nSIM Again this is the same simulation engine but configured for new instruction set and features of new CPU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48740
2016-02-18 08:22:32 +00:00
define Build/patch-dtb
arc: use patched .dts from sources Instead of using off-the-tree .dts files for ARC boards we're switching to use in-tree ones. And for that to work properly we apply upstream patch that adds currently missing "model" property. Upstream patch and discussion could be found here: http://lists.infradead.org/pipermail/linux-snps-arc/2016-August/001394.html Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Jonas Gorski <jonas.gorski@gmail.com> Cc: John Crispin <john@phrozen.org>
2016-08-16 11:49:16 +00:00
$(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$@.dtb)
linux: add support of Synopsys ARCHS38-based boards This patch introduces support of new boards with ARC HS38 cores. ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA. As with ARC770 we're addind support for 2 boards for now: [1] Synopsys SDP board (AXS103) This is the same base-board as in AXS101 but with FPGA-based CPU-tile where ARCHs38 core is implemented. [2] nSIM Again this is the same simulation engine but configured for new instruction set and features of new CPU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48740
2016-02-18 08:22:32 +00:00
$(STAGING_DIR_HOST)/bin/patch-dtb $@ $@.dtb
endef
# Shared device definition: applies to every defined device
define Device/Default
PROFILES = Default $$(DEVICE_PROFILE)
KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
DEVICE_PROFILE :=
endef
image.mk: clean up redundant code related to DEVICE_DTS It is used by a core build template, so the variable should be initialized and added to DEVICE_VARS in the core. Same for DEVICE_DTS_DIR Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-14 11:58:23 +00:00
DEVICE_VARS += DEVICE_PROFILE
linux: add support of Synopsys ARCHS38-based boards This patch introduces support of new boards with ARC HS38 cores. ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA. As with ARC770 we're addind support for 2 boards for now: [1] Synopsys SDP board (AXS103) This is the same base-board as in AXS101 but with FPGA-based CPU-tile where ARCHs38 core is implemented. [2] nSIM Again this is the same simulation engine but configured for new instruction set and features of new CPU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48740
2016-02-18 08:22:32 +00:00
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
define Device/vmlinux
KERNEL_SUFFIX := .elf
KERNEL_INITRAMFS := kernel-bin | patch-dtb
KERNEL_INITRAMFS_NAME = vmlinux-initramfs.elf
endef
define Device/uImage
KERNEL_SUFFIX := .bin
KERNEL_INITRAMFS := kernel-bin | patch-dtb | calculate-ep | uImage none
KERNEL_LOADADDR := 0x80000000
endef
define add_archs38_uImage
define Device/$(1)-uImage
$(call Device/uImage)
DEVICE_PROFILE := $(1)
DEVICE_DTS := $(1)
endef
TARGET_DEVICES += $(1)-uImage
endef
define add_archs38_vmlinux
define Device/$(1)-vmlinux
$(call Device/vmlinux)
linux: add support of Synopsys ARCHS38-based boards This patch introduces support of new boards with ARC HS38 cores. ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA. As with ARC770 we're addind support for 2 boards for now: [1] Synopsys SDP board (AXS103) This is the same base-board as in AXS101 but with FPGA-based CPU-tile where ARCHs38 core is implemented. [2] nSIM Again this is the same simulation engine but configured for new instruction set and features of new CPU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48740
2016-02-18 08:22:32 +00:00
DEVICE_PROFILE := $(1)
DEVICE_DTS := $(1)
endef
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
TARGET_DEVICES += $(1)-vmlinux
linux: add support of Synopsys ARCHS38-based boards This patch introduces support of new boards with ARC HS38 cores. ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA. As with ARC770 we're addind support for 2 boards for now: [1] Synopsys SDP board (AXS103) This is the same base-board as in AXS101 but with FPGA-based CPU-tile where ARCHs38 core is implemented. [2] nSIM Again this is the same simulation engine but configured for new instruction set and features of new CPU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48740
2016-02-18 08:22:32 +00:00
endef
# DesignWare AXS103
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
$(eval $(call add_archs38_vmlinux,axs103_idu))
$(eval $(call add_archs38_uImage,axs103_idu))
linux: add support of Synopsys ARCHS38-based boards This patch introduces support of new boards with ARC HS38 cores. ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA. As with ARC770 we're addind support for 2 boards for now: [1] Synopsys SDP board (AXS103) This is the same base-board as in AXS101 but with FPGA-based CPU-tile where ARCHs38 core is implemented. [2] nSIM Again this is the same simulation engine but configured for new instruction set and features of new CPU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48740
2016-02-18 08:22:32 +00:00
# nSIM with ARCHS38
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
$(eval $(call add_archs38_vmlinux,nsim_hs_idu))
$(eval $(call add_archs38_uImage,nsim_hs_idu))
linux: add support of Synopsys ARCHS38-based boards This patch introduces support of new boards with ARC HS38 cores. ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA. As with ARC770 we're addind support for 2 boards for now: [1] Synopsys SDP board (AXS103) This is the same base-board as in AXS101 but with FPGA-based CPU-tile where ARCHs38 core is implemented. [2] nSIM Again this is the same simulation engine but configured for new instruction set and features of new CPU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48740
2016-02-18 08:22:32 +00:00
$(eval $(call BuildImage))
Reference in a new issue Copy permalink