openwrtv4/target/linux/brcm2708/Makefile

#
# Copyright (C) 2012-2016 OpenWrt.org
# Copyright (C) 2017 LEDE project
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk

ARCH:=arm
BOARD:=brcm2708
BOARDNAME:=Broadcom BCM27xx
FEATURES:=ext4 audio usb usbgadget display gpio fpu squashfs
MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
SUBTARGETS:=bcm2708 bcm2709 bcm2710

KERNEL_PATCHVER:=4.9

define Target/Description
	Build firmware image for Broadcom BCM27xx SoC devices.
	Currently produces SD Card image for Raspberry Pi.
endef

include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
	brcm2708-gpu-fw \
	kmod-usb-hid \
	kmod-sound-core kmod-sound-arm-bcm2835 \
	kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \
	brcmfmac-firmware-43430-sdio brcmfmac-firmware-43455-sdio \
	kmod-brcmfmac wpad-mini partx-utils mkf2fs e2fsprogs

KERNELNAME:=Image dtbs

$(eval $(call BuildTarget))
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825 2012-07-24 20:39:17 +00:00			`#`
brcm2708: add Raspberry Pi 3 support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48967 2016-03-08 18:11:55 +00:00			`# Copyright (C) 2012-2016 OpenWrt.org`
brcm2708: add support for the new Raspberry Pi Zero W Support is experimental since I haven't got any device to test. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 2017-03-04 18:41:34 +00:00			`# Copyright (C) 2017 LEDE project`
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825 2012-07-24 20:39:17 +00:00			`#`
			`# This is free software, licensed under the GNU General Public License v2.`
			`# See /LICENSE for more information.`
			`#`
			`include $(TOPDIR)/rules.mk`

			`ARCH:=arm`
			`BOARD:=brcm2708`
brcm2708: add Raspberry Pi 3 support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48967 2016-03-08 18:11:55 +00:00			`BOARDNAME:=Broadcom BCM27xx`
brcm2708: add squashfs rootfs image This patch adds a image with squashfs as the root filesystem. A rootfs_data partition will be generated on the first boot and placed inside the rootfs partition (just after the squashfs image). advantages: - it is possible to migrate from an existing -ext4 installation and back via sysupgrade. - existing partition layout will not be lost. - slightly smaller image size. - support for attendedsysupgrade disadvantages: - needs f2fs + tools as well. This is because fs-tools decides on the blocksize of the sdcard. So either f2fs or ext4 can get choosen as the rootfs_data filesystem (depends on the size of the root partition). - rootfs_data is placed into the rootfs partition. This makes it difficult for tools that expect a /dev/mmc0pX device. It also makes it difficult for data recovery tools since they might not expect to find a embedded partition or will be confused. For people with existing build configurations: make sure to include mkf2fs and f2fsck package into the image... Otherwise the new -squashfs image will boot of a ram-overlay and won't keep the configurations after a reboot. Cc: Álvaro Fernández Rojas <noltari@gmail.com> Cc: Paul Spooren <spooren@informatik.uni-leipzig.de> Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Acked-by: Daniel Golle <daniel@makrotopia.org> 2018-03-27 17:42:18 +00:00			`FEATURES:=ext4 audio usb usbgadget display gpio fpu squashfs`
brcm2708: take over maintainership Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 2016-06-05 09:46:56 +00:00			`MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>`
brcm2708: add Raspberry Pi 3 support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48967 2016-03-08 18:11:55 +00:00			`SUBTARGETS:=bcm2708 bcm2709 bcm2710`
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825 2012-07-24 20:39:17 +00:00
brcm2708: switch to linux 4.9 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 2017-02-07 21:24:56 +00:00			`KERNEL_PATCHVER:=4.9`
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825 2012-07-24 20:39:17 +00:00
			`define Target/Description`
brcm2708: add Raspberry Pi 3 support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48967 2016-03-08 18:11:55 +00:00			`Build firmware image for Broadcom BCM27xx SoC devices.`
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825 2012-07-24 20:39:17 +00:00			`Currently produces SD Card image for Raspberry Pi.`
			`endef`

build: fix subtarget descriptions Move Target/Description above the target.mk include Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-09-04 11:34:18 +00:00			`include $(INCLUDE_DIR)/target.mk`
brcm2708: add support for the new Raspberry Pi Zero W Support is experimental since I haven't got any device to test. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 2017-03-04 18:41:34 +00:00			`DEFAULT_PACKAGES += \`
			`brcm2708-gpu-fw \`
			`kmod-usb-hid \`
			`kmod-sound-core kmod-sound-arm-bcm2835 \`
			`kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \`
brcm2708: add brcmfmac-firmware-43455-sdio to DEFAULT_PACKAGES Signed-off-by: Daniel Golle <daniel@makrotopia.org> 2018-06-13 22:42:09 +00:00			`brcmfmac-firmware-43430-sdio brcmfmac-firmware-43455-sdio \`
			`kmod-brcmfmac wpad-mini partx-utils mkf2fs e2fsprogs`
build: fix subtarget descriptions Move Target/Description above the target.mk include Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-09-04 11:34:18 +00:00
brcm2708: switch device tree compilation to linux Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47124 2015-10-05 10:27:34 +00:00			`KERNELNAME:=Image dtbs`
brcm2708: define KERNELNAME accordingly Define KERNELNAME to Image to get the build system to copy this image over $(KDIR) automatically for us. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39768 2014-02-28 20:29:40 +00:00
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825 2012-07-24 20:39:17 +00:00			`$(eval $(call BuildTarget))`