KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/imx6/image/Makefile

128 lines
3.1 KiB
Makefile
Raw Normal View History

imx6: add new target SVN-Revision: 36753
2013-05-29 01:27:29 +00:00
#
# Copyright (C) 2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
#################################################
# Images
#################################################
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
DEVICE_VARS += MKUBIFS_OPTS
define Build/boot-overlay
rm -rf $@.boot
mkdir -p $@.boot
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
$(CP) $@ $@.boot/$(IMG_PREFIX)-uImage
ln -sf $(IMG_PREFIX)-uImage $@.boot/uImage
$(foreach dts,$(DEVICE_DTS), \
$(CP) \
$(LINUX_DIR)/arch/$(ARCH)/boot/dts/$(dts).dtb \
$@.boot/$(IMG_PREFIX)-$(dts).dtb; \
ln -sf \
$(IMG_PREFIX)-$(dts).dtb \
$@.boot/$(dts).dtb; \
imx6: merge all gateworks boards into one profile Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38858
2013-11-18 22:23:42 +00:00
)
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
-n '$(DEVICE_ID) OpenWrt bootscript' \
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
-d ./bootscript-$(DEVICE_NAME) \
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
$@.boot/6x_bootscript-$(DEVICE_NAME)
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
$(STAGING_DIR_HOST)/bin/mkfs.ubifs \
--space-fixup --force-compr=zlib --squash-uids \
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
$(MKUBIFS_OPTS) -c 8124 \
-o $@.boot.ubifs -d $@.boot
imx6: fix generating bootfs in imagebuilder (FS#102) The image builder does not bundle sub-directories within $(KERNEL_BUILD_DIR), therfore the intermediate "ventana-uImage.boot" directory is not shipped, leading to failures with "make image" later on. To circumvent the issue, store the intermediate boot files as tar archive instead of putting them into a directory to ensure that they end up in the final image builder tarball. Fixes FS#102 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-20 18:17:51 +00:00
$(TAR) -C $@.boot -cf $@.boot.tar .
imx6: add new target SVN-Revision: 36753
2013-05-29 01:27:29 +00:00
endef
imx6: images: add bootfs.tar.gz build artifact In order to create a bootable block storage device, both bootfs and rootfs tarballs are required. However, our current scheme does not export a bootfs tarball so add the packaging of it here. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 49196
2016-04-19 13:46:33 +00:00
define Build/bootfs.tar.gz
imx6: fix generating bootfs in imagebuilder (FS#102) The image builder does not bundle sub-directories within $(KERNEL_BUILD_DIR), therfore the intermediate "ventana-uImage.boot" directory is not shipped, leading to failures with "make image" later on. To circumvent the issue, store the intermediate boot files as tar archive instead of putting them into a directory to ensure that they end up in the final image builder tarball. Fixes FS#102 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-20 18:17:51 +00:00
rm -rf $@.boot
mkdir -p $@.boot
$(TAR) -C $@.boot -xf $(IMAGE_KERNEL).boot.tar
$(TAR) -C $@.boot \
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
--numeric-owner --owner=0 --group=0 --transform "s,./,./boot/," \
-czvf $@ .
imx6: images: add bootfs.tar.gz build artifact In order to create a bootable block storage device, both bootfs and rootfs tarballs are required. However, our current scheme does not export a bootfs tarball so add the packaging of it here. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 49196
2016-04-19 13:46:33 +00:00
endef
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
#################################################
# Devices
#################################################
KERNEL_LOADADDR=0x10008000
define Device/Default
imx6: fix redundant PROFILES overrides in image makefile Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 17:33:52 +00:00
PROFILES := Generic
imx6: fix image makefile indentation for Device/ sections Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 17:12:09 +00:00
FILESYSTEMS := squashfs ext4
KERNEL_INSTALL := 1
KERNEL_SUFFIX := -uImage
KERNEL_NAME := zImage
KERNEL_PREFIX := $$(IMAGE_PREFIX)
KERNEL := kernel-bin | uImage none
IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
IMAGES :=
imx6: reorganize build system Changes include: * switching to profiles * adding ubifs support * building image for GW54XX board Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38441
2013-10-18 00:02:45 +00:00
endef
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
define Device/ventana
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
DEVICE_TITLE := Gateworks Ventana family (normal NAND flash)
imx6: fix image makefile indentation for Device/ sections Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 17:12:09 +00:00
DEVICE_DTS:= \
imx6dl-gw51xx \
imx6dl-gw52xx \
imx6dl-gw53xx \
imx6dl-gw54xx \
imx6dl-gw551x \
imx6dl-gw552x \
imx6q-gw51xx \
imx6q-gw52xx \
imx6q-gw53xx \
imx6q-gw54xx \
imx6q-gw5400-a \
imx6q-gw551x \
imx6: add GW553x support The Gateworks Ventana GW553x is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * small form factor (35x70mm) * 512MB DDR3 DRAM (2x32bit) (options up to 2GB) * 256MB NAND flash (4GB option) * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCI socket (with PCIe, USB, SIM) * 1x microSD socket * 1x SIM socket * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * analog CVBS video in * GPS (optional uBlox EVA-M8M) * Application headers: - 2x TTL UART (TX/RX) - 4x TTL GPIO (3x configurable as PWM) - 3x CVBS Analog video input (1x decoder with 3x selectable inputs) * Front panel connectors: * micro-HDMI audio/video out - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG See http://www.gateworks.com for more info Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-01 14:49:28 +00:00
imx6q-gw552x \
imx6q-gw553x
imx6: fix image makefile indentation for Device/ sections Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 17:12:09 +00:00
DEVICE_PACKAGES := kmod-thermal-imx kmod-sky2 kmod-usb-chipidea-imx kmod-usb-mxs-phy \
kmod-sound-core kmod-sound-soc-imx kmod-sound-soc-imx-sgtl5000 \
kmod-can kmod-can-flexcan kmod-can-raw \
kmod-rtc-ds1672 kmod-gpio-pca953x kmod-hwmon-gsc kmod-eeprom-at24 \
kmod-leds-gpio kmod-pps-gpio kmod-gw16083 \
kobs-ng
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
KERNEL += | boot-overlay
IMAGES := nand.ubi bootfs.tar.gz
imx6: disable EOF markers on UBI The boot loader does not recognize them and might mess up the volume Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-31 11:06:54 +00:00
UBINIZE_OPTS :=
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
UBINIZE_PARTS = boot=$$(KDIR_KERNEL_IMAGE).boot.ubifs=15
IMAGE/nand.ubi := append-ubi
IMAGE/bootfs.tar.gz := bootfs.tar.gz | install-dtb
imx6: fix build breakage introduced in 9e41c3f54e3c Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 17:33:10 +00:00
IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1)-$$(2)
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
PAGESIZE := 2048
BLOCKSIZE := 128KiB
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB
endef
define Device/ventana-large
$(Device/ventana)
DEVICE_NAME := ventana
DEVICE_TITLE := Gateworks Ventana family (large NAND flash)
IMAGES := nand.ubi
PAGESIZE := 4096
BLOCKSIZE := 256KiB
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 248KiB
imx6: add support for more then one nand type per profile Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38857
2013-11-18 22:23:40 +00:00
endef
imx6: reorganize build system Changes include: * switching to profiles * adding ubifs support * building image for GW54XX board Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38441
2013-10-18 00:02:45 +00:00
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
define Device/wandboard
imx6: fix image makefile indentation for Device/ sections Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 17:12:09 +00:00
DEVICE_TITLE := Wandboard Dual
DEVICE_DTS := imx6dl-wandboard
DEVICE_PACKAGES := kmod-thermal-imx kmod-usb-chipidea-imx kmod-usb-mxs-phy
imx6: reorganize build system Changes include: * switching to profiles * adding ubifs support * building image for GW54XX board Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38441
2013-10-18 00:02:45 +00:00
endef
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
TARGET_DEVICES += \
imx6: clean up / fix ventana image build code Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 17:27:15 +00:00
ventana ventana-large \
imx6: convert ventana images to squashfs+ubifs overlay Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
wandboard
imx6: add new target SVN-Revision: 36753
2013-05-29 01:27:29 +00:00
$(eval $(call BuildImage))
Reference in a new issue Copy permalink