openwrtv4/target/linux/brcm63xx/base-files/lib/brcm63xx.sh

#!/bin/sh
#
# Copyright (C) 2007 OpenWrt.org
#
#

board_name=""
status_led=""
status_led2=""
sys_mtd_part=""
brcm63xx_has_reset_button=""

brcm63xx_detect() {
	board_name=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /system type/ {print $2}' /proc/cpuinfo)

	case "$board_name" in
	"bcm63xx/96348GW "*)
		status_led="power"
		brcm63xx_has_reset_button="true"
		ifname=eth1
		;;
	"bcm63xx/GW6000 "*)
		brcm63xx_has_reset_button="true"
		ifname=eth1
		;;
	"bcm63xx/GW6200 "*)
		status_led="line1"
		status_led2="tel"
		brcm63xx_has_reset_button="true"
		ifname=eth1
		;;
	"bcm63xx/96348GW-11 "*)
		status_led="power"
		brcm63xx_has_reset_button="true"
		ifname=eth1
		;;
	"bcm63xx/CT536_CT5621 "*)
		status_led="power"
		brcm63xx_has_reset_button="true"
		ifname=eth0
		;;
	"bcm63xx/SPW500V "*)
		status_led="power:green"
		brcm63xx_has_reset_button="true"
		ifname=eth0
		;;
	"bcm63xx/AW4139 "*)
		status_led="dsl-274xb:green:power"
		brcm63xx_has_reset_button="true"
		ifname=eth0
		;;
	"bcm63xx/96358-502V "*)
		status_led="spw303v:green:power+adsl"
		brcm63xx_has_reset_button="true"
		ifname=eth0
		;;
	"bcm63xx/CPVA642 "* )
		status_led="power:green"
		brcm63xx_has_reset_button="true"
		ifname=eth0
		;;
	*)
		;;
	esac
}

brcm63xx_detect
brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00) SVN-Revision: 21626 2010-05-30 01:32:47 +00:00			`#!/bin/sh`
			`#`
			`# Copyright (C) 2007 OpenWrt.org`
			`#`
			`#`

			`board_name=""`
			`status_led=""`
			`status_led2=""`
			`sys_mtd_part=""`
			`brcm63xx_has_reset_button=""`

			`brcm63xx_detect() {`
			`board_name=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /system type/ {print $2}' /proc/cpuinfo)`

			`case "$board_name" in`
base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit SVN-Revision: 22465 2010-08-02 19:32:59 +00:00			`"bcm63xx/96348GW "*)`
Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. SVN-Revision: 24302 2010-12-07 15:15:41 +00:00			`status_led="power"`
brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00) SVN-Revision: 21626 2010-05-30 01:32:47 +00:00			`brcm63xx_has_reset_button="true"`
			`ifname=eth1`
			`;;`
boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. SVN-Revision: 24305 2010-12-07 15:15:54 +00:00			`"bcm63xx/GW6000 "*)`
			`brcm63xx_has_reset_button="true"`
			`ifname=eth1`
			`;;`
			`"bcm63xx/GW6200 "*)`
			`status_led="line1"`
			`status_led2="tel"`
			`brcm63xx_has_reset_button="true"`
			`ifname=eth1`
			`;;`
base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit SVN-Revision: 22465 2010-08-02 19:32:59 +00:00			`"bcm63xx/96348GW-11 "*)`
			`status_led="power"`
			`brcm63xx_has_reset_button="true"`
			`ifname=eth1`
			`;;`
Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. SVN-Revision: 24442 2010-12-10 18:59:58 +00:00			`"bcm63xx/CT536_CT5621 "*)`
			`status_led="power"`
			`brcm63xx_has_reset_button="true"`
			`ifname=eth0`
			`;;`
bcm63xx: Update support for the DSL-274xB revision C Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26876 2011-05-11 13:33:50 +00:00			`"bcm63xx/SPW500V "*)`
bcm63xx: Finalize support for DSL-274xB, rev C2. The DSL-2740B/DSL-2741B rev C2 support was missing the board definition, resulting in a kernel panic on boot. This patch adds it, and also renames the generated image name to properly reflect that it is for the revision C2, and for both the DSL-2740B and DSL-2741B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24188 2010-11-28 22:04:36 +00:00			`status_led="power:green"`
			`brcm63xx_has_reset_button="true"`
			`ifname=eth0`
			`;;`
bcm63xx: Update support for the DSL-274xB revision C Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26876 2011-05-11 13:33:50 +00:00			`"bcm63xx/AW4139 "*)`
			`status_led="dsl-274xb:green:power"`
			`brcm63xx_has_reset_button="true"`
			`ifname=eth0`
			`;;`
bcm63xx: Add support for the T-Home Speedport W 303V Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26878 2011-05-11 13:34:14 +00:00			`"bcm63xx/96358-502V "*)`
			`status_led="spw303v:green:power+adsl"`
			`brcm63xx_has_reset_button="true"`
			`ifname=eth0`
			`;;`
base-files: Added the preinit information for reset button and preinit indication led, and preinit interface SVN-Revision: 24276 2010-12-06 06:46:03 +00:00			`"bcm63xx/CPVA642 "* )`
			`status_led="power:green"`
			`brcm63xx_has_reset_button="true"`
			`ifname=eth0`
			`;;`
brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00) SVN-Revision: 21626 2010-05-30 01:32:47 +00:00			`*)`
			`;;`
			`esac`
			`}`

			`brcm63xx_detect`