openwrtv4/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh

PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1

RAMFS_COPY_BIN='fw_printenv fw_setenv'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'

platform_check_image() {
	case "$(board_name)" in
	asus,rt-ac58u)
		CI_UBIPART="UBI_DEV"
		local ubidev=$(nand_find_ubi $CI_UBIPART)
		local asus_root=$(nand_find_volume $ubidev jffs2)

		[ -n "$asus_root" ] || return 0

		cat << EOF
jffs2 partition is still present.
There's probably no space left
to install the filesystem.

You need to delete the jffs2 partition first:
# ubirmvol /dev/ubi0 --name=jffs2

Once this is done. Retry.
EOF
		return 1
		;;
	esac
	return 0;
}

zyxel_do_upgrade() {
	local tar_file="$1"

	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
	board_dir=${board_dir%/}

	tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel

	if [ "$SAVE_CONFIG" -eq 1 ]; then
		tar Oxf $tar_file ${board_dir}/root | mtd -j "$CONF_TAR" write - rootfs
	else
		tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
	fi
}

platform_do_upgrade() {
	case "$(board_name)" in
	8dev,jalapeno)
		nand_do_upgrade "$ARGV"
		;;
	asus,rt-ac58u)
		CI_UBIPART="UBI_DEV"
		CI_KERNPART="linux"
		nand_do_upgrade "$1"
		;;
	openmesh,a42 |\
	openmesh,a62)
		PART_NAME="inactive"
		platform_do_upgrade_openmesh "$ARGV"
		;;
	meraki,mr33)
		CI_KERNPART="part.safe"
		nand_do_upgrade "$1"
		;;
	zyxel,nbg6617)
		zyxel_do_upgrade "$1"
		;;
	*)
		default_do_upgrade "$ARGV"
		;;
	esac
}

platform_nand_pre_upgrade() {
	case "$(board_name)" in
	asus,rt-ac58u)
		CI_UBIPART="UBI_DEV"
		CI_KERNPART="linux"
		;;
	meraki,mr33)
		CI_KERNPART="part.safe"
		;;
	esac
}

blink_led() {
	. /etc/diag.sh; set_state upgrade
}

append sysupgrade_pre_upgrade blink_led