openwrtv4/target/linux/lantiq/patches-4.9/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch

From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 6 Jan 2017 17:55:24 +0100
Subject: [PATCH 2/2] usb: dwc2:  add support for other Lantiq SoCs

The size of the internal RAM of the DesignWare USB controller changed
between the different Lantiq SoCs. We have the following sizes:

Amazon + Danube: 8 KByte
Amazon SE + arx100: 2 KByte
xrx200 + xrx300: 2.5 KByte

For Danube SoC we do not provide the params and let the driver decide
to use sane defaults, for the Amazon SE and arx100 we use small fifos
and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo.
The auto detection of max_transfer_size and max_packet_count should
work, so remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
 drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 39 insertions(+), 7 deletions(-)

--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -151,7 +151,7 @@ static const struct dwc2_core_params par
 	.hibernation			= -1,
 };
 
-static const struct dwc2_core_params params_ltq = {
+static const struct dwc2_core_params params_ase = {
 	.otg_cap			= 2,	/* non-HNP/non-SRP */
 	.otg_ver			= -1,
 	.dma_enable			= -1,
@@ -163,8 +163,8 @@ static const struct dwc2_core_params par
 	.host_rx_fifo_size		= 288,	/* 288 DWORDs */
 	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
 	.host_perio_tx_fifo_size	= 96,	/* 96 DWORDs */
-	.max_transfer_size		= 65535,
-	.max_packet_count		= 511,
+	.max_transfer_size		= -1,
+	.max_packet_count		= -1,
 	.host_channels			= -1,
 	.phy_type			= -1,
 	.phy_utmi_width			= -1,
@@ -176,8 +176,37 @@ static const struct dwc2_core_params par
 	.host_ls_low_power_phy_clk	= -1,
 	.ts_dline			= -1,
 	.reload_ctl			= -1,
-	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 <<
-					  GAHBCFG_HBSTLEN_SHIFT,
+	.ahbcfg				= -1,
+	.uframe_sched			= -1,
+	.external_id_pin_ctl		= -1,
+	.hibernation			= -1,
+};
+
+static const struct dwc2_core_params params_xrx200 = {
+	.otg_cap			= 2,	/* non-HNP/non-SRP */
+	.otg_ver			= -1,
+	.dma_enable			= -1,
+	.dma_desc_enable		= -1,
+	.speed				= -1,
+	.enable_dynamic_fifo		= -1,
+	.en_multiple_tx_fifo		= -1,
+	.host_rx_fifo_size		= 288,	/* 288 DWORDs */
+	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
+	.host_perio_tx_fifo_size	= 136,	/* 136 DWORDs */
+	.max_transfer_size		= -1,
+	.max_packet_count		= -1,
+	.host_channels			= -1,
+	.phy_type			= -1,
+	.phy_utmi_width			= -1,
+	.phy_ulpi_ddr			= -1,
+	.phy_ulpi_ext_vbus		= -1,
+	.i2c_enable			= -1,
+	.ulpi_fs_ls			= -1,
+	.host_support_fs_ls_low_power	= -1,
+	.host_ls_low_power_phy_clk	= -1,
+	.ts_dline			= -1,
+	.reload_ctl			= -1,
+	.ahbcfg				= -1,
 	.uframe_sched			= -1,
 	.external_id_pin_ctl		= -1,
 	.hibernation			= -1,
@@ -515,8 +544,11 @@ static const struct of_device_id dwc2_of
 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
 	{ .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
-	{ .compatible = "lantiq,arx100-usb", .data = &params_ltq },
-	{ .compatible = "lantiq,xrx200-usb", .data = &params_ltq },
+	{ .compatible = "lantiq,danube-usb", .data = NULL },
+	{ .compatible = "lantiq,ase-usb", .data = &params_ase },
+	{ .compatible = "lantiq,arx100-usb", .data = &params_ase },
+	{ .compatible = "lantiq,xrx200-usb", .data = &params_xrx200 },
+	{ .compatible = "lantiq,xrx300-usb", .data = &params_xrx200 },
 	{ .compatible = "snps,dwc2", .data = NULL },
 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
 	{ .compatible = "amlogic,meson8b-usb", .data = &params_amlogic },