openwrtv4/target/linux/ramips/dts/ALL5002.dts

115 lines
1.6 KiB
Text
Raw Normal View History

/dts-v1/;
#include "rt3352.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "allnet,all5002", "ralink,rt3352-soc";
model = "Allnet ALL5002";
i2c-gpio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <10>;
pcf0: iexp@38 {
#gpio-cells = <2>;
compatible = "inxp,pcf8574a";
reg = <0x38>;
gpio-controller;
};
hwmon@4b {
compatible = "national,lm92";
reg = <0x4b>;
};
};
gpio-leds {
compatible = "gpio-leds";
ld1 {
label = "all5002:green:ld1";
gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
};
ld2 {
label = "all5002:green:ld2";
gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
};
};
};
&gpio0 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&esw {
mediatek,portmap = <0x3f>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};