KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network

134 lines
2.4 KiB
Text
Raw Normal View History

bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
#!/bin/sh
#
# Copyright (C) 2012 OpenWrt.org
#
[ -e /etc/config/network ] && exit 0
touch /etc/config/network
. /lib/functions/uci-defaults.sh
. /lib/brcm63xx.sh
ucidef_set_interface_loopback
case "$board_name" in
brcm63xx: base-files: order board names alphabetically Restore alphatetical order in uci-defaults scripts and brcm63xx.sh Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41590
2014-07-12 12:31:45 +00:00
96348W3 |\
96358-502V |\
brcm63xx: add user-space support for Netgear CVG834G Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36877
2013-06-06 22:22:20 +00:00
CVG834G_E15R3921 |\
add support for board named RTA770W Actually this board is the very same as the rta770bw, where the additional 'b' within the name just indicates 'Annex B'. The ADSL Modem itself is able to handle both, Annex A as well as Annex B - the loaded firmware makes the only difference SVN-Revision: 35500
2013-02-05 14:57:40 +00:00
RTA770BW |\
RTA770W |\
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
SPW500V)
ucidef_set_interface_lan "eth0"
;;
96338GW |\
96338W |\
96338W2_E7T |\
96348A-122 |\
96348W3 |\
brcm63xx: add support for Asmax AR 1004g router Support for Asmax AR 1004g router Signed-off-by: Adrian Feliks <mexit@o2.pl> Patchwork: http://patchwork.openwrt.org/patch/4464/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39674
2014-02-22 11:16:38 +00:00
AR1004G |\
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
CPVA642 |\
CT536_CT5621 |\
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
CT6373-1 |\
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
D-4P-W |\
Add F@ST2604 board support. Add Sagem F@ST2604 board support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 33886
2012-10-21 14:35:06 +00:00
"F@ST2604" |\
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
RTA1320_16M |\
V2110)
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
ucidef_set_interface_lan "eth0"
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5"
;;
96348GW |\
96348GW-10 |\
96348GW-11 |\
96348GW-A |\
96358VW |\
96358VW2 |\
AGPF-S0 |\
"CPVA502+" |\
DV201AMR |\
DWV-S0 |\
"F@ST2404" |\
MAGIC |\
RTA1025W_16 |\
V2500V_BB)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "eth1" "1" "1"
ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5"
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
;;
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
AW4139 |\
bcm63xx: fix DSL-274xB F1 default network config Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37032
2013-06-24 20:35:54 +00:00
AW4339U |\
brcm63xx: Fix HW553 support - adsl and lan leds are swapped. - internetkey is labeled as hspa. - enable status led and reset button for failsafe. - use new leds script. - fix switch configuration. - remove enet0 from board_info. - add profile. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41588
2014-07-12 12:31:39 +00:00
HW553 |\
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
HW556*)
bcm63xx: add a default switch configuration for DSL-274XB SVN-Revision: 31874
2012-05-27 13:22:17 +00:00
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t"
;;
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
NB4-* |\
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
DVG3810BN)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "eth1" "1" "1"
ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5t"
;;
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
96328avng |\
96328A-1241N |\
96328A-1441N1 |\
963281TAN |\
963281T_TEF |\
brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL router This adds userspace support for Sagemcom F@st 2704 router. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4215/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39672
2014-02-22 11:16:33 +00:00
96368MVNgr |\
brcm63xx: F@ST2504n board support (image, base-files) Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4730/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39676
2014-02-22 11:16:42 +00:00
"F@ST2504n" |\
brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL router This adds userspace support for Sagemcom F@st 2704 router. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4215/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39672
2014-02-22 11:16:33 +00:00
"F@ST2704V2")
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 8t"
;;
96368MVWG)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "1 2 4 5 8t"
;;
brcm63xx: Add support for Comtrend WAP-5813n This adds support for Comtrend WAP-5813n. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: refresh patches] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41421
2014-06-30 13:34:34 +00:00
96369R-1231N)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 5t"
ucidef_add_switch_vlan "eth0" "2" "4 5t"
;;
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
NB6)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t"
ucidef_add_switch_vlan "switch0" "2" "0 9t"
;;
brcm63xx: add VW6339GU support Completely untested except for booting from network; wan port only works in 10/HD, lan1 only in 100/FD. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39678
2014-02-22 11:16:46 +00:00
VW6339GU)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
ucidef_add_switch_vlan "switch0" "2" "4 8t"
;;
brcm63xx: add initial support for BCM963268BU_P300 reference board Only netboot tested, so no images or now. GbE ports are only working in FE mode, and leds do not work. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39679
2014-02-22 11:16:48 +00:00
963268BU_P300)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 3 4 5 6 7 8t"
;;
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
*)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
esac
uci commit network
exit 0
Reference in a new issue Copy permalink