52 lines
1.8 KiB
Diff
52 lines
1.8 KiB
Diff
|
--- a/arch/powerpc/sysdev/ppc4xx_pci.c 2016-05-30 17:23:34.543707092 +0200
|
||
|
|
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c 2016-05-30 17:31:02.497707885 +0200
|
||
|
|
@@ -1066,15 +1066,24 @@ static int __init apm821xx_pciex_init_po
|
||
|
|
u32 val;
|
||
|
|
|
||
|
|
/*
|
||
|
|
- * Do a software reset on PCIe ports.
|
||
|
|
- * This code is to fix the issue that pci drivers doesn't re-assign
|
||
|
|
- * bus number for PCIE devices after Uboot
|
||
|
|
- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
|
||
|
|
- * PT quad port, SAS LSI 1064E)
|
||
|
|
+ * Only reset the PHY when no link is currently established.
|
||
|
|
+ * This is for the Atheros PCIe board which has problems to establish
|
||
|
|
+ * the link (again) after this PHY reset. All other currently tested
|
||
|
|
+ * PCIe boards don't show this problem.
|
||
|
|
*/
|
||
|
|
-
|
||
|
|
- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
|
||
|
|
- mdelay(10);
|
||
|
|
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
|
||
|
|
+ if (!(val & 0x00001000)) {
|
||
|
|
+ /*
|
||
|
|
+ * Do a software reset on PCIe ports.
|
||
|
|
+ * This code is to fix the issue that pci drivers doesn't re-assign
|
||
|
|
+ * bus number for PCIE devices after Uboot
|
||
|
|
+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
|
||
|
|
+ * PT quad port, SAS LSI 1064E)
|
||
|
|
+ */
|
||
|
|
+
|
||
|
|
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
|
||
|
|
+ mdelay(10);
|
||
|
|
+ }
|
||
|
|
|
||
|
|
if (port->endpoint)
|
||
|
|
val = PTYPE_LEGACY_ENDPOINT << 20;
|
||
|
|
@@ -1091,9 +1100,12 @@ static int __init apm821xx_pciex_init_po
|
||
|
|
mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
|
||
|
|
mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
|
||
|
|
|
||
|
|
- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
|
||
|
|
- mdelay(50);
|
||
|
|
- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
|
||
|
|
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
|
||
|
|
+ if (!(val & 0x00001000)) {
|
||
|
|
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
|
||
|
|
+ mdelay(50);
|
||
|
|
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
|
||
|
|
+ }
|
||
|
|
|
||
|
|
mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
|
||
|
|
mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
|