openwrtv4/target/linux/ipq806x/patches/0151-ARM-ipq8064-Add-nand-device-info.patch

109 lines
2.3 KiB
Diff
Raw Normal View History

From 4490cfa66379909cdddc3518c8e75b7cd26d8f69 Mon Sep 17 00:00:00 2001
From: Andy Gross <agross@codeaurora.org>
Date: Mon, 16 Jun 2014 16:53:49 -0500
Subject: [PATCH 151/182] ARM: ipq8064: Add nand device info
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 34 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/qcom-ipq8064.dtsi | 33 +++++++++++++++++++++++++++++
2 files changed, 67 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -45,6 +45,29 @@
bias-none;
};
};
+ nand_pins: nand_pins {
+ mux {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38", "gpio39",
+ "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ pullups {
+ pins = "gpio39";
+ bias-pull-up;
+ };
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ bias-bus-hold;
+ };
+ };
+
};
gsbi@16300000 {
@@ -126,5 +149,16 @@
sata@29000000 {
status = "ok";
};
+
+ dma@18300000 {
+ status = "ok";
+ };
+
+ nand@0x1ac00000 {
+ status = "ok";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -76,6 +76,7 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 32 0x4>;
+
};
intc: interrupt-controller@2000000 {
@@ -369,5 +370,37 @@
phy-names = "sata-phy";
status = "disabled";
};
+
+ adm_dma: dma@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <0 170 0>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core_clk", "iface_clk";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+
+ reset-names = "adm", "pbus", "c0", "c1", "c2";
+
+ status = "disabled";
+ };
+
+ nand@0x1ac00000 {
+ compatible = "qcom,qcom_nand";
+ reg = <0x1ac00000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clocks = <&gcc EBI2_CLK>;
+ clock-names = "core_clk";
+
+
+ status = "disabled";
+ };
};
};