openwrtv4/target/linux/apm821xx/sata/target.mk

BOARDNAME := Devices which boot from SATA (NAS)
FEATURES += ext4 usb
DEFAULT_PACKAGES += badblocks block-mount e2fsprogs \
		    kmod-dm kmod-md-mod partx-utils

define Target/Description
	Build firmware images for APM82181 boards that boot from SATA.
	For NAS like the MyBook Live Series.
endef
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> 2016-07-20 13:44:54 +00:00			`BOARDNAME := Devices which boot from SATA (NAS)`
			`FEATURES += ext4 usb`
			`DEFAULT_PACKAGES += badblocks block-mount e2fsprogs \`
			`kmod-dm kmod-md-mod partx-utils`

			`define Target/Description`
			`Build firmware images for APM82181 boards that boot from SATA.`
			`For NAS like the MyBook Live Series.`
			`endef`