openwrtv4/target/linux/brcm47xx/patches-3.2/052-bcma-complete-workaround-for-BCMA43224.patch

53 lines
2.2 KiB
Diff
Raw Normal View History

From efe89df0326b777563d197b8cf1c25209a31ceb0 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 21 Jan 2012 18:47:42 +0100
Subject: [PATCH 32/34] bcma: complete workaround for BCMA43224
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/driver_chipcommon_pmu.c | 15 +++++++++++----
include/linux/bcma/bcma_driver_chipcommon.h | 5 +++++
2 files changed, 16 insertions(+), 4 deletions(-)
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -142,12 +142,19 @@ void bcma_pmu_workarounds(struct bcma_dr
/* BCM4331 workaround is SPROM-related, we put it in sprom.c */
break;
case 43224:
+ case 43421:
+ /* enable 12 mA drive strenth for 43224 and set chipControl register bit 15 */
if (bus->chipinfo.rev == 0) {
- pr_err("Workarounds for 43224 rev 0 not fully "
- "implemented\n");
- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0);
+ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL,
+ BCMA_CCTRL_43224_GPIO_TOGGLE,
+ BCMA_CCTRL_43224_GPIO_TOGGLE);
+ bcma_chipco_chipctl_maskset(cc, 0,
+ BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
+ BCMA_CCTRL_43224A0_12MA_LED_DRIVE);
} else {
- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+ bcma_chipco_chipctl_maskset(cc, 0,
+ BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
+ BCMA_CCTRL_43224B0_12MA_LED_DRIVE);
}
break;
case 43225:
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -382,6 +382,11 @@
#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */
#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */
+/* 43224 chip-specific ChipControl register bits */
+#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */
+#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */
+#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */
+
#define BCMA_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
#define BCMA_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
#define BCMA_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */