openwrtv4/package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch

97 lines
3.4 KiB
Diff
Raw Normal View History

From 76a9fed9e5580945827a82963ac7315186fd0ebe Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
Date: Mon, 11 Nov 2013 06:45:44 +0100
Subject: [PATCH 1/9] cosmetic: kirkwood: style fixes in kwbimage.cfg files
When diffing through the changes only the relevant changes
should be displayed.
Signed-off-by: Luka Perkov <luka@openwrt.org>
---
board/iomega/iconnect/kwbimage.cfg | 4 ++--
board/raidsonic/ib62x0/kwbimage.cfg | 22 +++++++++++-----------
2 files changed, 13 insertions(+), 13 deletions(-)
--- a/board/iomega/iconnect/kwbimage.cfg
+++ b/board/iomega/iconnect/kwbimage.cfg
@@ -20,7 +20,7 @@ NAND_PAGE_SIZE 0x0800
# Configure RGMII-0 interface pad voltage to 1.8V
DATA 0xffd100e0 0x1b1b1b9b
-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
DATA 0xffd01400 0x43000c30 # DDR Configuration register
# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
# bit23-14: 0x0,
@@ -87,7 +87,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode
# bit6-4: 0x4, CL=5
# bit7: 0x0, TestMode=0 normal
# bit8: 0x0, DLL reset=0 normal
-# bit11-9: 0x6, auto-precharge write recovery ????????????
+# bit11-9: 0x6, auto-precharge write recovery
# bit12: 0x0, PD must be zero
# bit31-13: 0x0, required
--- a/board/raidsonic/ib62x0/kwbimage.cfg
+++ b/board/raidsonic/ib62x0/kwbimage.cfg
@@ -11,7 +11,7 @@
#
# Boot Media configurations
-BOOT_FROM nand # change from nand to uart if building UART image
+BOOT_FROM nand
NAND_ECC_MODE default
NAND_PAGE_SIZE 0x0800
@@ -21,12 +21,12 @@ NAND_PAGE_SIZE 0x0800
# Configure RGMII-0 interface pad voltage to 1.8V
DATA 0xffd100e0 0x1b1b1b9b
-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
DATA 0xffd01400 0x43000c30 # DDR Configuration register
# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
# bit23-14: 0x0,
-# bit24: 0x1, enable exit self refresh mode on DDR access
-# bit25: 0x1, required
+# bit24: 0x1, enable exit self refresh mode on DDR access
+# bit25: 0x1, required
# bit29-26: 0x0,
# bit31-30: 0x1,
@@ -64,10 +64,10 @@ DATA 0xffd01410 0x0000000c # DDR Address
# bit3-2: 11, Cs0size (1Gb)
# bit5-4: 00, Cs1width (x8)
# bit7-6: 11, Cs1size (1Gb)
-# bit9-8: 00, Cs2width (nonexistent
-# bit11-10: 00, Cs2size (nonexistent
-# bit13-12: 00, Cs3width (nonexistent
-# bit15-14: 00, Cs3size (nonexistent
+# bit9-8: 00, Cs2width (nonexistent)
+# bit11-10: 00, Cs2size (nonexistent)
+# bit13-12: 00, Cs3width (nonexistent)
+# bit15-14: 00, Cs3size (nonexistent)
# bit16: 0, Cs0AddrSel
# bit17: 0, Cs1AddrSel
# bit18: 0, Cs2AddrSel
@@ -88,7 +88,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode
# bit6-4: 0x4, CL=5
# bit7: 0x0, TestMode=0 normal
# bit8: 0x0, DLL reset=0 normal
-# bit11-9: 0x6, auto-precharge write recovery ????????????
+# bit11-9: 0x6, auto-precharge write recovery
# bit12: 0x0, PD must be zero
# bit31-13: 0x0, required
@@ -148,8 +148,8 @@ DATA 0xffd0149c 0x0000e803 # CPU ODT Con
DATA 0xffd01480 0x00000001 # DDR Initialization Control
# bit0: 0x1, enable DDR init upon this register write
-DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register
-DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register
+DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register
+DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register
# End of Header extension
DATA 0x0 0x0