openwrtv4/target/linux/ramips/dts/WHR-G300N.dts

/dts-v1/;

#include "rt3050.dtsi"

#include <dt-bindings/input/input.h>

/ {
	compatible = "WHR-G300N", "ralink,rt3052-soc";
	model = "Buffalo WHR-G300N";

	cfi@1f000000 {
		compatible = "cfi-flash";
		reg = <0x1f000000 0x800000>;
		bank-width = <2>;
		device-width = <2>;
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x30000>;
			read-only;
		};

		partition@30000 {
			label = "u-boot-env";
			reg = <0x30000 0x10000>;
			read-only;
		};

		factory: partition@40000 {
			label = "factory";
			reg = <0x40000 0x10000>;
			read-only;
		};

		partition@50000 {
			label = "firmware";
			reg = <0x50000 0x3a0000>;
		};

		partition@3f0000 {
			label = "user";
			reg = <0x3f0000 0x10000>;
			read-only;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		diag {
			label = "whr-g300n:red:diag";
			gpios = <&gpio0 7 1>;
		};

		router {
			label = "whr-g300n:green:router";
			gpios = <&gpio0 9 1>;
		};

		security {
			label = "whr-g300n:amber:security";
			gpios = <&gpio0 14 1>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio0 10 1>;
			linux,code = <KEY_RESTART>;
		};

		aoss {
			label = "aoss";
			gpios = <&gpio0 0 1>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		router-off {
			label = "router-off";
			gpios = <&gpio0 11 1>;
			linux,code = <BTN_2>;
		};

		router-on {
			label = "router-on";
			gpios = <&gpio0 8 1>;
			linux,code = <BTN_3>;
		};
	};
};

&pinctrl {
	state_default: pinctrl0 {
		gpio {
			ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
			ralink,function = "gpio";
		};
	};
};

&esw {
	mediatek,portmap = <0x2f>;
};

&wmac {
	ralink,mtd-eeprom = <&factory 0>;
};