290 lines
6.5 KiB
C
290 lines
6.5 KiB
C
|
/*
|
||
|
* net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips
|
||
|
* Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
|
||
|
*
|
||
|
* This driver was base on: net/dsa/mv88e6060.c
|
||
|
* net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips
|
||
|
* Copyright (c) 2008-2009 Marvell Semiconductor
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License as published by
|
||
|
* the Free Software Foundation; either version 2 of the License, or
|
||
|
* (at your option) any later version.
|
||
|
*/
|
||
|
|
||
|
#include <linux/version.h>
|
||
|
#include <linux/list.h>
|
||
|
#include <linux/netdevice.h>
|
||
|
#include <linux/phy.h>
|
||
|
#include <net/dsa.h>
|
||
|
#include <linux/version.h>
|
||
|
|
||
|
#define REG_BASE 0x10
|
||
|
#define REG_PHY(p) (REG_BASE + (p))
|
||
|
#define REG_PORT(p) (REG_BASE + 8 + (p))
|
||
|
#define REG_GLOBAL (REG_BASE + 0x0f)
|
||
|
#define NUM_PORTS 7
|
||
|
|
||
|
static int reg_read(struct dsa_switch *ds, int addr, int reg)
|
||
|
{
|
||
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
|
||
|
struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
|
||
|
return mdiobus_read(bus, addr, reg);
|
||
|
#else
|
||
|
struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev);
|
||
|
return mdiobus_read(bus, addr, reg);
|
||
|
#endif
|
||
|
}
|
||
|
|
||
|
#define REG_READ(addr, reg) \
|
||
|
({ \
|
||
|
int __ret; \
|
||
|
\
|
||
|
__ret = reg_read(ds, addr, reg); \
|
||
|
if (__ret < 0) \
|
||
|
return __ret; \
|
||
|
__ret; \
|
||
|
})
|
||
|
|
||
|
|
||
|
static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
|
||
|
{
|
||
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
|
||
|
struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
|
||
|
return mdiobus_write(bus, addr, reg, val);
|
||
|
#else
|
||
|
struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev);
|
||
|
return mdiobus_write(bus, addr, reg, val);
|
||
|
#endif
|
||
|
}
|
||
|
|
||
|
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,8,0)
|
||
|
static enum dsa_tag_protocol mv88e6063_get_tag_protocol(struct dsa_switch *ds)
|
||
|
{
|
||
|
return DSA_TAG_PROTO_TRAILER;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
#define REG_WRITE(addr, reg, val) \
|
||
|
({ \
|
||
|
int __ret; \
|
||
|
\
|
||
|
__ret = reg_write(ds, addr, reg, val); \
|
||
|
if (__ret < 0) \
|
||
|
return __ret; \
|
||
|
})
|
||
|
|
||
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
|
||
|
static char *mv88e6063_drv_probe(struct device *host_dev, int sw_addr)
|
||
|
#else
|
||
|
static const char *mv88e6063_drv_probe(struct device *dsa_dev,
|
||
|
struct device *host_dev, int sw_addr,
|
||
|
void **_priv)
|
||
|
#endif
|
||
|
{
|
||
|
struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
|
||
|
int ret;
|
||
|
|
||
|
if (!bus)
|
||
|
return NULL;
|
||
|
|
||
|
ret = mdiobus_read(bus, REG_PORT(0), 0x03);
|
||
|
if (ret >= 0) {
|
||
|
ret &= 0xfff0;
|
||
|
if (ret == 0x1530)
|
||
|
return "Marvell 88E6063";
|
||
|
}
|
||
|
|
||
|
return NULL;
|
||
|
}
|
||
|
|
||
|
static int mv88e6063_switch_reset(struct dsa_switch *ds)
|
||
|
{
|
||
|
int i;
|
||
|
int ret;
|
||
|
|
||
|
/*
|
||
|
* Set all ports to the disabled state.
|
||
|
*/
|
||
|
for (i = 0; i < NUM_PORTS; i++) {
|
||
|
ret = REG_READ(REG_PORT(i), 0x04);
|
||
|
REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Wait for transmit queues to drain.
|
||
|
*/
|
||
|
msleep(2);
|
||
|
|
||
|
/*
|
||
|
* Reset the switch.
|
||
|
*/
|
||
|
REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
|
||
|
|
||
|
/*
|
||
|
* Wait up to one second for reset to complete.
|
||
|
*/
|
||
|
for (i = 0; i < 1000; i++) {
|
||
|
ret = REG_READ(REG_GLOBAL, 0x00);
|
||
|
if ((ret & 0x8000) == 0x0000)
|
||
|
break;
|
||
|
|
||
|
msleep(1);
|
||
|
}
|
||
|
if (i == 1000)
|
||
|
return -ETIMEDOUT;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e6063_setup_global(struct dsa_switch *ds)
|
||
|
{
|
||
|
/*
|
||
|
* Disable discarding of frames with excessive collisions,
|
||
|
* set the maximum frame size to 1536 bytes, and mask all
|
||
|
* interrupt sources.
|
||
|
*/
|
||
|
REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
|
||
|
|
||
|
/*
|
||
|
* Enable automatic address learning, set the address
|
||
|
* database size to 1024 entries, and set the default aging
|
||
|
* time to 5 minutes.
|
||
|
*/
|
||
|
REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
|
||
|
{
|
||
|
int addr = REG_PORT(p);
|
||
|
|
||
|
/*
|
||
|
* Do not force flow control, disable Ingress and Egress
|
||
|
* Header tagging, disable VLAN tunneling, and set the port
|
||
|
* state to Forwarding. Additionally, if this is the CPU
|
||
|
* port, enable Ingress and Egress Trailer tagging mode.
|
||
|
*/
|
||
|
REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
|
||
|
|
||
|
/*
|
||
|
* Port based VLAN map: give each port its own address
|
||
|
* database, allow the CPU port to talk to each of the 'real'
|
||
|
* ports, and allow each of the 'real' ports to only talk to
|
||
|
* the CPU port.
|
||
|
*/
|
||
|
REG_WRITE(addr, 0x06,
|
||
|
((p & 0xf) << 12) |
|
||
|
(dsa_is_cpu_port(ds, p) ?
|
||
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
|
||
|
ds->phys_port_mask :
|
||
|
#else
|
||
|
ds->enabled_port_mask :
|
||
|
#endif
|
||
|
(1 << ds->dst->cpu_port)));
|
||
|
|
||
|
/*
|
||
|
* Port Association Vector: when learning source addresses
|
||
|
* of packets, add the address to the address database using
|
||
|
* a port bitmap that has only the bit for this port set and
|
||
|
* the other bits clear.
|
||
|
*/
|
||
|
REG_WRITE(addr, 0x0b, 1 << p);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e6063_setup(struct dsa_switch *ds)
|
||
|
{
|
||
|
int i;
|
||
|
int ret;
|
||
|
|
||
|
ret = mv88e6063_switch_reset(ds);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* @@@ initialise atu */
|
||
|
|
||
|
ret = mv88e6063_setup_global(ds);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
for (i = 0; i < NUM_PORTS; i++) {
|
||
|
ret = mv88e6063_setup_port(ds, i);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr)
|
||
|
{
|
||
|
REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
|
||
|
REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
|
||
|
REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e6063_port_to_phy_addr(int port)
|
||
|
{
|
||
|
if (port >= 0 && port <= NUM_PORTS)
|
||
|
return REG_PHY(port);
|
||
|
return -1;
|
||
|
}
|
||
|
|
||
|
static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum)
|
||
|
{
|
||
|
int addr;
|
||
|
|
||
|
addr = mv88e6063_port_to_phy_addr(port);
|
||
|
if (addr == -1)
|
||
|
return 0xffff;
|
||
|
|
||
|
return reg_read(ds, addr, regnum);
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
|
||
|
{
|
||
|
int addr;
|
||
|
|
||
|
addr = mv88e6063_port_to_phy_addr(port);
|
||
|
if (addr == -1)
|
||
|
return 0xffff;
|
||
|
|
||
|
return reg_write(ds, addr, regnum, val);
|
||
|
}
|
||
|
|
||
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(4,9,0)
|
||
|
static struct dsa_switch_driver mv88e6063_switch_ops = {
|
||
|
#else
|
||
|
static struct dsa_switch_ops mv88e6063_switch_ops = {
|
||
|
#endif
|
||
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(4,8,0)
|
||
|
.tag_protocol = htons(ETH_P_TRAILER),
|
||
|
#else
|
||
|
.get_tag_protocol = mv88e6063_get_tag_protocol,
|
||
|
#endif
|
||
|
.probe = mv88e6063_drv_probe,
|
||
|
.setup = mv88e6063_setup,
|
||
|
.set_addr = mv88e6063_set_addr,
|
||
|
.phy_read = mv88e6063_phy_read,
|
||
|
.phy_write = mv88e6063_phy_write,
|
||
|
};
|
||
|
|
||
|
static int __init mv88e6063_init(void)
|
||
|
{
|
||
|
register_switch_driver(&mv88e6063_switch_ops);
|
||
|
return 0;
|
||
|
}
|
||
|
module_init(mv88e6063_init);
|
||
|
|
||
|
static void __exit mv88e6063_cleanup(void)
|
||
|
{
|
||
|
unregister_switch_driver(&mv88e6063_switch_ops);
|
||
|
}
|
||
|
module_exit(mv88e6063_cleanup);
|