openwrtv4/target/linux/samsung/patches-4.14/001-s5pv210-nand.patch

45 lines
1.6 KiB
Diff
Raw Normal View History

--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -95,6 +95,16 @@
status = "disabled";
};
+ nand: nand@b0000000 {
+ compatible = "samsung,s5pv210-nand";
+ reg = <0xb0e00000 0x40>, <0xb0e20000 0x200>;
+ clocks = <&clocks CLK_NANDXL>, <&clocks CLK_NFCON>;
+ clock-names = "nandxl", "nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
+
chipid@e0000000 {
compatible = "samsung,s5pv210-chipid";
reg = <0xe0000000 0x1000>;
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -181,6 +181,12 @@ config MTD_NAND_S3C2410_CLKSTOP
when the is NAND chip selected or released, but will save
approximately 5mA of power when there is nothing happening.
+config MTD_NAND_S5PXX
+ tristate "NAND Flash support for Samsung S5Pxx SoCs"
+ depends on ARCH_S5PV210
+ help
+ This enables the NAND flash controller on the S5Pxx SoCs
+
config MTD_NAND_TANGO
tristate "NAND Flash support for Tango chips"
depends on ARCH_TANGO || COMPILE_TEST
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_NAND_DENALI_DT) += dena
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
+obj-$(CONFIG_MTD_NAND_S5PXX) += s5pxx_nand.o
obj-$(CONFIG_MTD_NAND_TANGO) += tango_nand.o
obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o
obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o