openwrtv4/openwrt/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/sbpci.c

/*
 * Low-Level PCI and SB support for BCM47xx
 *
 * Copyright 2004, Broadcom Corporation
 * All Rights Reserved.
 * 
 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 *
 * $Id$
 */

#include <typedefs.h>
#include <pcicfg.h>
#include <bcmdevs.h>
#include <sbconfig.h>
#include <sbpci.h>
#include <osl.h>
#include <bcmendian.h>
#include <bcmutils.h>
#include <sbutils.h>
#include <bcmnvram.h>
#include <hndmips.h>

/* Can free sbpci_init() memory after boot */
#ifndef linux
#define __init
#endif

/* Emulated configuration space */
static pci_config_regs sb_config_regs[SB_MAXCORES];

/* Banned cores */
static uint16 pci_ban[32] = { 0 };
static uint pci_banned = 0;

/* CardBus mode */
static bool cardbus = FALSE;

/* Disable PCI host core */
static bool pci_disabled = FALSE;

/*
 * Functions for accessing external PCI configuration space
 */

/* Assume one-hot slot wiring */
#define PCI_SLOT_MAX 16

static uint32
config_cmd(void *sbh, uint bus, uint dev, uint func, uint off)
{
	uint coreidx;
	sbpciregs_t *regs;
	uint32 addr = 0;

	/* CardBusMode supports only one device */
	if (cardbus && dev > 1)
		return 0;

	coreidx = sb_coreidx(sbh);
	regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);

	/* Type 0 transaction */
	if (bus == 1) {
		/* Skip unwired slots */
		if (dev < PCI_SLOT_MAX) {
			/* Slide the PCI window to the appropriate slot */
			W_REG(&regs->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK));
			addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) |
				(func << 8) | (off & ~3);
		}
	}

	/* Type 1 transaction */
	else {
		W_REG(&regs->sbtopci1, SBTOPCI_CFG1);
		addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3);
	}

	sb_setcoreidx(sbh, coreidx);

	return addr;
}

static int
extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
{
	uint32 addr, *reg = NULL, val;
	int ret = 0;

	if (pci_disabled ||
	    !(addr = config_cmd(sbh, bus, dev, func, off)) ||
	    !(reg = (uint32 *) REG_MAP(addr, len)) ||
	    BUSPROBE(val, reg))
		val = 0xffffffff;

	val >>= 8 * (off & 3);
	if (len == 4)
		*((uint32 *) buf) = val;
	else if (len == 2)
		*((uint16 *) buf) = (uint16) val;
	else if (len == 1)
		*((uint8 *) buf) = (uint8) val;
	else
		ret = -1;

	if (reg)
		REG_UNMAP(reg);

	return ret;
}

static int
extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
{
	uint32 addr, *reg = NULL, val;
	int ret = 0;

	if (pci_disabled ||
	    !(addr = config_cmd(sbh, bus, dev, func, off)) ||
	    !(reg = (uint32 *) REG_MAP(addr, len)) ||
	    BUSPROBE(val, reg))
		goto done;

	if (len == 4)
		val = *((uint32 *) buf);
	else if (len == 2) {
		val &= ~(0xffff << (8 * (off & 3)));
		val |= *((uint16 *) buf) << (8 * (off & 3));
	} else if (len == 1) {
		val &= ~(0xff << (8 * (off & 3)));
		val |= *((uint8 *) buf) << (8 * (off & 3));
	} else
		ret = -1;

	W_REG(reg, val);

 done:
	if (reg)
		REG_UNMAP(reg);

	return ret;
}

/*
 * Functions for accessing translated SB configuration space
 */

static int
sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
{
	pci_config_regs *cfg;

	if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
		return -1;
	cfg = &sb_config_regs[dev];

	ASSERT(ISALIGNED(off, len));
	ASSERT(ISALIGNED(buf, len));

	if (len == 4)
		*((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
	else if (len == 2)
		*((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
	else if (len == 1)
		*((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
	else
		return -1;

	return 0;
}

static int
sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
{
	uint coreidx, n;
	void *regs;
	sbconfig_t *sb;
	pci_config_regs *cfg;

	if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
		return -1;
	cfg = &sb_config_regs[dev];

	ASSERT(ISALIGNED(off, len));
	ASSERT(ISALIGNED(buf, len));

	/* Emulate BAR sizing */
	if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) &&
	    len == 4 && *((uint32 *) buf) == ~0) {
		coreidx = sb_coreidx(sbh);
		if ((regs = sb_setcoreidx(sbh, dev))) {
			sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
			/* Highest numbered address match register */
			n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
			if (off == OFFSETOF(pci_config_regs, base[0]))
				cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1);
			else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1)
				cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1);
			else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2)
				cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1);
			else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3)
				cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);
		}
		sb_setcoreidx(sbh, coreidx);
		return 0;
	}

	if (len == 4)
		*((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
	else if (len == 2)
		*((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
	else if (len == 1)
		*((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
	else
		return -1;

	return 0;
}

int
sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
{
	if (bus == 0)
		return sb_read_config(sbh, bus, dev, func, off, buf, len);
	else
		return extpci_read_config(sbh, bus, dev, func, off, buf, len);
}

int
sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
{
	if (bus == 0)
		return sb_write_config(sbh, bus, dev, func, off, buf, len);
	else
		return extpci_write_config(sbh, bus, dev, func, off, buf, len);
}

void
sbpci_ban(uint16 core)
{
	if (pci_banned < ARRAYSIZE(pci_ban))
		pci_ban[pci_banned++] = core;
}

int __init
sbpci_init(void *sbh)
{
	uint chip, chiprev, chippkg, coreidx, host, i;
	uint32 boardflags;
	sbpciregs_t *pci;
	sbconfig_t *sb;
	pci_config_regs *cfg;
	void *regs;
	char varname[8];
	uint wlidx = 0;
	uint16 vendor, core;
	uint8 class, subclass, progif;
	uint32 val;
	uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
	uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };

	chip = sb_chip(sbh);
	chiprev = sb_chiprev(sbh);
	chippkg = sb_chippkg(sbh);
	coreidx = sb_coreidx(sbh);

	if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0)))
		return -1;
	sb_core_reset(sbh, 0);

	boardflags = (uint32) getintvar(NULL, "boardflags");

	if ((chip == BCM4310_DEVICE_ID) && (chiprev == 0))
		pci_disabled = TRUE;

	/*
	 * The 200-pin BCM4712 package does not bond out PCI. Even when
	 * PCI is bonded out, some boards may leave the pins
	 * floating.
	 */
	if (((chip == BCM4712_DEVICE_ID) &&
	     ((chippkg == BCM4712SMALL_PKG_ID) ||
	      (chippkg == BCM4712MID_PKG_ID))) ||
	    (boardflags & BFL_NOPCI))
		pci_disabled = TRUE;

	/*
	 * If the PCI core should not be touched (disabled, not bonded
	 * out, or pins floating), do not even attempt to access core
	 * registers. Otherwise, try to determine if it is in host
	 * mode.
	 */
	if (pci_disabled)
		host = 0;
	else
		host = !BUSPROBE(val, &pci->control);

	if (!host) {
		/* Disable PCI interrupts in client mode */
		sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
		W_REG(&sb->sbintvec, 0);

		/* Disable the PCI bridge in client mode */
		sbpci_ban(SB_PCI);
		printf("PCI: Disabled\n");
	} else {
		/* Reset the external PCI bus and enable the clock */
		W_REG(&pci->control, 0x5);		/* enable the tristate drivers */
		W_REG(&pci->control, 0xd);		/* enable the PCI clock */
		OSL_DELAY(150);				/* delay > 100 us */
		W_REG(&pci->control, 0xf);		/* deassert PCI reset */
		W_REG(&pci->arbcontrol, PCI_INT_ARB);	/* use internal arbiter */
		OSL_DELAY(1);				/* delay 1 us */

		/* Enable CardBusMode */
		cardbus = nvram_match("cardbus", "1");
		if (cardbus) {
			printf("PCI: Enabling CardBus\n");
			/* GPIO 1 resets the CardBus device on bcm94710ap */
			sb_gpioout(sbh, 1, 1);
			sb_gpioouten(sbh, 1, 1);
			W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400);
		}

		/* 64 MB I/O access window */
		W_REG(&pci->sbtopci0, SBTOPCI_IO);
		/* 64 MB configuration access window */
		W_REG(&pci->sbtopci1, SBTOPCI_CFG0);
		/* 1 GB memory access window */
		W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);

		/* Enable PCI bridge BAR0 prefetch and burst */
		val = 6;
		sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val));

		/* Enable PCI interrupts */
		W_REG(&pci->intmask, PCI_INTA);
	}

	/* Scan the SB bus */
	bzero(sb_config_regs, sizeof(sb_config_regs));
	for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
		cfg->vendor = 0xffff;
		if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
			continue;
		sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);

		/* Read ID register and parse vendor and core */
		val = R_REG(&sb->sbidhigh);
		vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT;
		core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT;
		progif = 0;

		/* Check if this core is banned */
		for (i = 0; i < pci_banned; i++)
			if (core == pci_ban[i])
				break;
		if (i < pci_banned)
			continue;

		/* Known vendor translations */
		switch (vendor) {
		case SB_VEND_BCM:
			vendor = VENDOR_BROADCOM;
			break;
		}

		/* Determine class based on known core codes */
		switch (core) {
		case SB_ILINE20:
			class = PCI_CLASS_NET;
			subclass = PCI_NET_ETHER;
			core = BCM47XX_ILINE_ID;
			break;
		case SB_ILINE100:
			class = PCI_CLASS_NET;
			subclass = PCI_NET_ETHER;
			core = BCM4610_ILINE_ID;
			break;
		case SB_ENET:
			class = PCI_CLASS_NET;
			subclass = PCI_NET_ETHER;
			core = BCM47XX_ENET_ID;
			break;
		case SB_SDRAM:
		case SB_MEMC:
			class = PCI_CLASS_MEMORY;
			subclass = PCI_MEMORY_RAM;
			break;
		case SB_PCI:
			class = PCI_CLASS_BRIDGE;
			subclass = PCI_BRIDGE_PCI;
			break;
		case SB_MIPS:
		case SB_MIPS33:
			class = PCI_CLASS_CPU;
			subclass = PCI_CPU_MIPS;
			break;
		case SB_CODEC:
			class = PCI_CLASS_COMM;
			subclass = PCI_COMM_MODEM;
			core = BCM47XX_V90_ID;
			break;
		case SB_USB:
			class = PCI_CLASS_SERIAL;
			subclass = PCI_SERIAL_USB;
			progif = 0x10; /* OHCI */
			core = BCM47XX_USB_ID;
			break;
		case SB_USB11H:
			class = PCI_CLASS_SERIAL;
			subclass = PCI_SERIAL_USB;
			progif = 0x10; /* OHCI */
			core = BCM47XX_USBH_ID;
			break;
		case SB_USB11D:
			class = PCI_CLASS_SERIAL;
			subclass = PCI_SERIAL_USB;
			core = BCM47XX_USBD_ID;
			break;
		case SB_IPSEC:
			class = PCI_CLASS_CRYPT;
			subclass = PCI_CRYPT_NETWORK;
			core = BCM47XX_IPSEC_ID;
			break;
		case SB_EXTIF:
		case SB_CC:
			class = PCI_CLASS_MEMORY;
			subclass = PCI_MEMORY_FLASH;
			break;
		case SB_D11:
			class = PCI_CLASS_NET;
			subclass = PCI_NET_OTHER;
			/* Let an nvram variable override this */
			sprintf(varname, "wl%did", wlidx);
			wlidx++;
			if ((core = getintvar(NULL, varname)) == 0) {
				if (chip == BCM4712_DEVICE_ID) {
					if (chippkg == BCM4712SMALL_PKG_ID)
						core = BCM4306_D11G_ID;
					else
						core = BCM4306_D11DUAL_ID;
				} else {
					/* 4310 */
					core = BCM4310_D11B_ID;
				}
			}
			break;

		default:
			class = subclass = progif = 0xff;
			break;
		}

		/* Supported translations */
		cfg->vendor = htol16(vendor);
		cfg->device = htol16(core);
		cfg->rev_id = chiprev;
		cfg->prog_if = progif;
		cfg->sub_class = subclass;
		cfg->base_class = class;
		cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0)));
		cfg->base[1] = htol32(sb_base(R_REG(&sb->sbadmatch1)));
		cfg->base[2] = htol32(sb_base(R_REG(&sb->sbadmatch2)));
		cfg->base[3] = htol32(sb_base(R_REG(&sb->sbadmatch3)));
		cfg->base[4] = 0;
		cfg->base[5] = 0;
		if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI)
			cfg->header_type = PCI_HEADER_BRIDGE;
		else
			cfg->header_type = PCI_HEADER_NORMAL;
		/* Save core interrupt flag */
		cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK;
		/* Default to MIPS shared interrupt 0 */
		cfg->int_line = 0;
		/* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */
		if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
		    (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
			sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
			val = R_REG(&sb->sbipsflag);
			for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) {
				if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin)
					break;
			}
			if (cfg->int_line > 4)
				cfg->int_line = 0;
		}
		/* Emulated core */
		*((uint32 *) &cfg->sprom_control) = 0xffffffff;
	}

	sb_setcoreidx(sbh, coreidx);
	return 0;
}

void
sbpci_check(void *sbh)
{
	uint coreidx;
	sbpciregs_t *pci;
	uint32 sbtopci1;
	uint32 buf[64], *ptr, i;
	ulong pa;
	volatile uint j;

	coreidx = sb_coreidx(sbh);
	pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);

	/* Clear the test array */
	pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL);
	ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
	memset(ptr, 0, sizeof(buf));

	/* Point PCI window 1 to memory */
	sbtopci1 = R_REG(&pci->sbtopci1);
	W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK));

	/* Fill the test array via PCI window 1 */
	ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf));
	for (i = 0; i < ARRAYSIZE(buf); i++) {
		for (j = 0; j < 2; j++);
		W_REG(&ptr[i], i);
	}
	REG_UNMAP(ptr);

	/* Restore PCI window 1 */
	W_REG(&pci->sbtopci1, sbtopci1);

	/* Check the test array */
	DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL);
	ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
	for (i = 0; i < ARRAYSIZE(buf); i++) {
		if (ptr[i] != i)
			break;
	}

	/* Change the clock if the test fails */
	if (i < ARRAYSIZE(buf)) {
		uint32 req, cur;

		cur = sb_clock(sbh);
		printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000);
		for (req = 104000000; req < 176000000; req += 4000000) {
			printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000);
			/* This will only reset if the clocks are valid and have changed */
			sb_mips_setclock(sbh, req, 0, 0);
		}
		/* Should not reach here */
		ASSERT(0);
	}

	sb_setcoreidx(sbh, coreidx);
}