openwrtv4/target/linux/apm821xx/base-files/lib/preinit/79_move_config

#!/bin/sh

BOOTPART=/dev/sda1

move_config() {
	grep -q 'MyBook Live' /proc/cpuinfo || return
	if [ -b $BOOTPART ]; then
		mkdir -p /boot
		mount -t ext4 -o rw,noatime $BOOTPART /boot
		[ -f /boot/sysupgrade.tgz ] && mv -f /boot/sysupgrade.tgz /
	fi
}

boot_hook_add preinit_mount_root move_config
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> 2016-07-20 13:44:54 +00:00			`#!/bin/sh`

			`BOOTPART=/dev/sda1`

			`move_config() {`
apm821xx: only attempt to mount /boot on MyBook Live Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-07-28 17:30:03 +00:00			`grep -q 'MyBook Live' /proc/cpuinfo \|\| return`
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> 2016-07-20 13:44:54 +00:00			`if [ -b $BOOTPART ]; then`
			`mkdir -p /boot`
			`mount -t ext4 -o rw,noatime $BOOTPART /boot`
			`[ -f /boot/sysupgrade.tgz ] && mv -f /boot/sysupgrade.tgz /`
			`fi`
			`}`

			`boot_hook_add preinit_mount_root move_config`