openwrtv4/target/linux/ar71xx/image/tp-link.mk

1237 lines
34 KiB
Makefile
Raw Normal View History

DEVICE_VARS += LOADER_FLASH_OFFS TPLINK_BOARD_ID TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_HWID TPLINK_HWREV
define Build/copy-file
cat "$(1)" > "$@"
endef
define Build/loader-okli
dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new"
cat "$@" >> "$@.new"
mv "$@.new" "$@"
endef
define Build/loader-okli-compile
$(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0 KERNEL_CMDLINE="$(CMDLINE)")
endef
# combine kernel and rootfs into one image
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
# <type> is "sysupgrade" or "factory"
#
# -a align the rootfs start on an <align> bytes boundary
# -j add jffs2 end-of-filesystem markers
# -s strip padding from end of the image
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
define Build/mktplinkfw
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
-m $(TPLINK_HEADER_VERSION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@.new \
-j -X 0x40000 \
-a $(call rootfs_align,$(FILESYSTEM)) \
$(wordlist 2,$(words $(1)),$(1)) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
endef
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
define Build/uImageArcher
mkimage -A $(LINUX_KARCH) \
-O linux -T kernel \
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
@mv $@.new $@
endef
define Device/tplink
TPLINK_HWREV := 0x1
TPLINK_HEADER_VERSION := 1
LOADER_TYPE := gz
KERNEL := kernel-bin | patch-cmdline | lzma
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade
IMAGE/factory.bin := append-rootfs | mktplinkfw factory
endef
define Device/tplink-nolzma
$(Device/tplink)
LOADER_FLASH_OFFS := 0x22000
COMPILE := loader-$(1).gz
COMPILE/loader-$(1).gz := loader-okli-compile
KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-cmdline | tplink-v1-header
endef
define Device/tplink-4m
$(Device/tplink-nolzma)
TPLINK_FLASHLAYOUT := 4M
IMAGE_SIZE := 3904k
endef
define Device/tplink-8m
$(Device/tplink-nolzma)
TPLINK_FLASHLAYOUT := 8M
IMAGE_SIZE := 7936k
endef
define Device/tplink-4mlzma
$(Device/tplink)
TPLINK_FLASHLAYOUT := 4Mlzma
IMAGE_SIZE := 3904k
endef
define Device/tplink-8mlzma
$(Device/tplink)
TPLINK_FLASHLAYOUT := 8Mlzma
IMAGE_SIZE := 7936k
endef
define Device/tplink-16mlzma
$(Device/tplink)
TPLINK_FLASHLAYOUT := 16Mlzma
IMAGE_SIZE := 15872k
endef
define Device/archer-cxx
KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
define Device/archer-c25-v1
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C25 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887
BOARDNAME := ARCHER-C25-V1
TPLINK_BOARD_ID := ARCHER-C25-V1
DEVICE_PROFILE := ARCHERC25V1
IMAGE_SIZE := 7808k
LOADER_TYPE := elf
MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k@0x30000(firmware)
SUPPORTED_DEVICES := archer-c25-v1
endef
TARGET_DEVICES += archer-c25-v1
define Device/archer-c58-v1
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C58 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9888
BOARDNAME := ARCHER-C58-V1
TPLINK_BOARD_ID := ARCHER-C58-V1
DEVICE_PROFILE := ARCHERC58V1
IMAGE_SIZE := 7936k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,7936k(firmware),64k(tplink)ro,64k(art)ro
SUPPORTED_DEVICES := archer-c58-v1
endef
TARGET_DEVICES += archer-c58-v1
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
define Device/archer-c59-v1
$(Device/archer-cxx)
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
DEVICE_TITLE := TP-LINK Archer C59 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca9888
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
BOARDNAME := ARCHER-C59-V1
TPLINK_BOARD_ID := ARCHER-C59-V1
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
DEVICE_PROFILE := ARCHERC59V1
IMAGE_SIZE := 14528k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1536k(kernel),12992k(rootfs),1664k(tplink)ro,64k(art)ro,14528k@0x20000(firmware)
SUPPORTED_DEVICES := archer-c59-v1
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
endef
TARGET_DEVICES += archer-c59-v1
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
define Device/archer-c60-v1
$(Device/archer-cxx)
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
DEVICE_TITLE := TP-LINK Archer C60 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9888
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
BOARDNAME := ARCHER-C60-V1
TPLINK_BOARD_ID := ARCHER-C60-V1
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
DEVICE_PROFILE := ARCHERC60V1
IMAGE_SIZE := 7936k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,7936k(firmware),64k(tplink)ro,64k(art)ro
SUPPORTED_DEVICES := archer-c60-v1
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
endef
TARGET_DEVICES += archer-c60-v1
define Device/archer-c5-v1
$(Device/tplink-16mlzma)
DEVICE_TITLE := TP-LINK Archer C5 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C5
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0xc5000001
endef
TARGET_DEVICES += archer-c5-v1
define Device/archer-c7-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK Archer C7 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C7
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0x75000001
endef
TARGET_DEVICES += archer-c7-v1
define Device/archer-c7-v2
$(Device/tplink-16mlzma)
DEVICE_TITLE := TP-LINK Archer C7 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C7-V2
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0xc7000002
IMAGES := sysupgrade.bin factory.bin factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += archer-c7-v2
define Device/archer-c7-v2-il
$(Device/tplink-16mlzma)
DEVICE_TITLE := TP-LINK Archer C7 v2 (IL)
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C7-V2
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0xc7000002
TPLINK_HWREV := 0x494c0001
endef
TARGET_DEVICES += archer-c7-v2-il
define Device/tl-wdr7500-v3
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK Archer C7 v3
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C7
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0x75000003
endef
TARGET_DEVICES += tl-wdr7500-v3
define Device/archer-c7-v4
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C7 v4
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C7-V4
TPLINK_BOARD_ID := ARCHER-C7-V4
IMAGE_SIZE := 15104k
LOADER_TYPE := elf
MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,1536k(kernel),13568k(rootfs),960k(config)ro,64k(art)ro,15104k@0x40000(firmware)
SUPPORTED_DEVICES := archer-c7-v4
endef
TARGET_DEVICES += archer-c7-v4
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
define Device/cpe510-520-v1
DEVICE_TITLE := TP-LINK CPE510/520 v1
DEVICE_PACKAGES := rssileds
MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
IMAGE_SIZE := 7680k
BOARDNAME := CPE510
TPLINK_BOARD_ID := CPE510
DEVICE_PROFILE := CPE510
LOADER_TYPE := elf
KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
TARGET_DEVICES += cpe510-520-v1
define Device/cpe210-220-v1
$(Device/cpe510-520-v1)
DEVICE_TITLE := TP-LINK CPE210/220 v1
BOARDNAME := CPE210
TPLINK_BOARD_ID := CPE210
endef
TARGET_DEVICES += cpe210-220-v1
define Device/wbs210-v1
$(Device/cpe510-520-v1)
DEVICE_TITLE := TP-LINK WBS210 v1
BOARDNAME := WBS210
TPLINK_BOARD_ID := WBS210
endef
TARGET_DEVICES += wbs210-v1
define Device/wbs510-v1
$(Device/cpe510-520-v1)
DEVICE_TITLE := TP-LINK WBS510 v1
BOARDNAME := WBS510
TPLINK_BOARD_ID := WBS510
endef
TARGET_DEVICES += wbs510-v1
define Device/eap120-v1
DEVICE_TITLE := TP-LINK EAP120 v1
MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,1536k(kernel),14336k(rootfs),192k(config)ro,64k(ART)ro,15872k@0x40000(firmware)
IMAGE_SIZE := 15872k
BOARDNAME := EAP120
TPLINK_BOARD_ID := EAP120
DEVICE_PROFILE := EAP120
LOADER_TYPE := elf
KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
TARGET_DEVICES += eap120-v1
define Device/re450-v1
DEVICE_TITLE := TP-LINK RE450 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
MTDPARTS := spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro
IMAGE_SIZE := 7936k
BOARDNAME := RE450
TPLINK_BOARD_ID := RE450
DEVICE_PROFILE := RE450
LOADER_TYPE := elf
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
TPLINK_HEADER_VERSION := 1
KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
TARGET_DEVICES += re450-v1
define Device/tl-mr10u-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-MR10U v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := TL-MR10U
DEVICE_PROFILE := TLMR10U
TPLINK_HWID := 0x00100101
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-mr10u-v1
define Device/tl-mr11u-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-MR11U v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-MR11U
DEVICE_PROFILE := TLMR11U
TPLINK_HWID := 0x00110101
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-mr11u-v1
define Device/tl-mr11u-v2
$(Device/tl-mr11u-v1)
DEVICE_TITLE := TP-LINK TL-MR11U v2
TPLINK_HWID := 0x00110102
endef
TARGET_DEVICES += tl-mr11u-v2
define Device/tl-mr12u-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-MR12U v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-MR13U
DEVICE_PROFILE := TLMR12U
TPLINK_HWID := 0x00120101
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-mr12u-v1
define Device/tl-mr13u-v1
$(Device/tl-mr12u-v1)
DEVICE_TITLE := TP-LINK TL-MR13U v1
DEVICE_PROFILE := TLMR13U
TPLINK_HWID := 0x00130101
endef
TARGET_DEVICES += tl-mr13u-v1
define Device/tl-mr3020-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-MR3020 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-MR3020
DEVICE_PROFILE := TLMR3020
TPLINK_HWID := 0x30200001
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-mr3020-v1
define Device/tl-mr3040-v1
$(Device/tl-mr3020-v1)
DEVICE_TITLE := TP-LINK TL-MR3040 v1
BOARDNAME := TL-MR3040
DEVICE_PROFILE := TLMR3040
TPLINK_HWID := 0x30400001
endef
TARGET_DEVICES += tl-mr3040-v1
define Device/tl-mr3040-v2
$(Device/tl-mr3040-v1)
DEVICE_TITLE := TP-LINK TL-MR3040 v2
BOARDNAME := TL-MR3040-v2
TPLINK_HWID := 0x30400002
endef
TARGET_DEVICES += tl-mr3040-v2
define Device/tl-mr3220-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-MR3220 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-MR3220
DEVICE_PROFILE := TLMR3220
TPLINK_HWID := 0x32200001
endef
TARGET_DEVICES += tl-mr3220-v1
define Device/tl-mr3220-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-MR3220 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-MR3220-v2
DEVICE_PROFILE := TLMR3220
TPLINK_HWID := 0x32200002
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-mr3220-v2
define Device/tl-mr3420-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-MR3420 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-MR3420
DEVICE_PROFILE := TLMR3420
TPLINK_HWID := 0x34200001
endef
TARGET_DEVICES += tl-mr3420-v1
define Device/tl-mr3420-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-MR3420 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-MR3420-v2
DEVICE_PROFILE := TLMR3420
TPLINK_HWID := 0x34200002
endef
TARGET_DEVICES += tl-mr3420-v2
define Device/tl-mr6400-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-MR6400 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb-enablemodem
BOARDNAME := TL-MR6400
DEVICE_PROFILE := TLMR6400
TPLINK_HWID := 0x64000001
endef
TARGET_DEVICES += tl-mr6400-v1
define Device/tl-wa701nd-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WA701N/ND v1
BOARDNAME := TL-WA901ND
DEVICE_PROFILE := TLWA701
TPLINK_HWID := 0x07010001
endef
TARGET_DEVICES += tl-wa701nd-v1
define Device/tl-wa701nd-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA701N/ND v2
BOARDNAME := TL-WA701ND-v2
DEVICE_PROFILE := TLWA701
TPLINK_HWID := 0x07010002
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wa701nd-v2
define Device/tl-wa7210n-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA7210N v2
DEVICE_PACKAGES := rssileds kmod-ledtrig-netdev
BOARDNAME := TL-WA7210N-v2
DEVICE_PROFILE := TLWA7210
TPLINK_HWID := 0x72100002
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wa7210n-v2
define Device/tl-wa730re-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WA730RE v1
BOARDNAME := TL-WA901ND
DEVICE_PROFILE := TLWA730RE
TPLINK_HWID := 0x07300001
endef
TARGET_DEVICES += tl-wa730re-v1
define Device/tl-wa750re-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA750RE v1
DEVICE_PACKAGES := rssileds
BOARDNAME := TL-WA750RE
DEVICE_PROFILE := TLWA750
TPLINK_HWID := 0x07500001
endef
TARGET_DEVICES += tl-wa750re-v1
define Device/tl-wa7510n-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WA7510N v1
BOARDNAME := TL-WA7510N
DEVICE_PROFILE := TLWA7510
TPLINK_HWID := 0x75100001
endef
TARGET_DEVICES += tl-wa7510n-v1
define Device/tl-wa801nd-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WA801N/ND v1
BOARDNAME := TL-WA901ND
DEVICE_PROFILE := TLWA801
TPLINK_HWID := 0x08010001
endef
TARGET_DEVICES += tl-wa801nd-v1
define Device/tl-wa801nd-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA801N/ND v2
BOARDNAME := TL-WA801ND-v2
DEVICE_PROFILE := TLWA801
TPLINK_HWID := 0x08010002
endef
TARGET_DEVICES += tl-wa801nd-v2
define Device/tl-wa801nd-v3
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA801N/ND v3
BOARDNAME := TL-WA801ND-v3
DEVICE_PROFILE := TLWA801
TPLINK_HWID := 0x08010003
endef
TARGET_DEVICES += tl-wa801nd-v3
define Device/tl-wa830re-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WA830RE v1
BOARDNAME := TL-WA901ND
DEVICE_PROFILE := TLWA830
TPLINK_HWID := 0x08300010
endef
TARGET_DEVICES += tl-wa830re-v1
define Device/tl-wa830re-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA830RE v2
BOARDNAME := TL-WA830RE-v2
DEVICE_PROFILE := TLWA830
TPLINK_HWID := 0x08300002
endef
TARGET_DEVICES += tl-wa830re-v2
define Device/tl-wa850re-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA850RE v1
DEVICE_PACKAGES := rssileds
BOARDNAME := TL-WA850RE
DEVICE_PROFILE := TLWA850
TPLINK_HWID := 0x08500001
endef
TARGET_DEVICES += tl-wa850re-v1
define Device/tl-wa85xre
$(Device/tplink)
TPLINK_HWREV := 0
KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
MTDPARTS := spi0.0:128k(u-boot)ro,1344k(kernel),2304k(rootfs),256k(config)ro,64k(art)ro,3648k@0x20000(firmware)
endef
define Device/tl-wa850re-v2
$(Device/tl-wa85xre)
DEVICE_TITLE := TP-LINK TL-WA850RE v2
DEVICE_PACKAGES := rssileds
BOARDNAME := TL-WA850RE-V2
DEVICE_PROFILE := TLWA850
TPLINK_BOARD_ID := TLWA850REV2
TPLINK_HWID := 0x08500002
endef
TARGET_DEVICES += tl-wa850re-v2
define Device/tl-wa855re-v1
$(Device/tl-wa85xre)
DEVICE_TITLE := TP-LINK TL-WA855RE v1
BOARDNAME := TL-WA855RE-v1
DEVICE_PROFILE := TLWA855RE
TPLINK_HWID := 0x08550001
TPLINK_BOARD_ID := TLWA855REV1
endef
TARGET_DEVICES += tl-wa855re-v1
define Device/tl-wa860re-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA860RE v1
BOARDNAME := TL-WA860RE
DEVICE_PROFILE := TLWA860
TPLINK_HWID := 0x08600001
endef
TARGET_DEVICES += tl-wa860re-v1
define Device/tl-wa901nd-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WA901N/ND v1
BOARDNAME := TL-WA901ND
DEVICE_PROFILE := TLWA901
TPLINK_HWID := 0x09010001
endef
TARGET_DEVICES += tl-wa901nd-v1
define Device/tl-wa901nd-v2
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WA901N/ND v2
BOARDNAME := TL-WA901ND-v2
DEVICE_PROFILE := TLWA901
TPLINK_HWID := 0x09010002
endef
TARGET_DEVICES += tl-wa901nd-v2
define Device/tl-wa901nd-v3
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA901N/ND v3
BOARDNAME := TL-WA901ND-v3
DEVICE_PROFILE := TLWA901
TPLINK_HWID := 0x09010003
endef
TARGET_DEVICES += tl-wa901nd-v3
define Device/tl-wa901nd-v4
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WA901N/ND v4
BOARDNAME := TL-WA901ND-v4
DEVICE_PROFILE := TLWA901
TPLINK_HWID := 0x09010004
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tl-wa901nd-v4
define Device/tl-wa901nd-v5
$(Device/tl-wa901nd-v4)
DEVICE_TITLE := TP-LINK TL-WA901N/ND v5
BOARDNAME := TL-WA901ND-v5
TPLINK_HWID := 0x09010005
endef
TARGET_DEVICES += tl-wa901nd-v5
define Device/tl-wdr3320-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WDR3320 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WDR3320-v2
DEVICE_PROFILE := TLWDR3320V2
TPLINK_HWID := 0x33200002
TPLINK_HEADER_VERSION := 2
endef
TARGET_DEVICES += tl-wdr3320-v2
define Device/tl-wdr3500-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WDR3500 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WDR3500
DEVICE_PROFILE := TLWDR4300
TPLINK_HWID := 0x35000001
endef
TARGET_DEVICES += tl-wdr3500-v1
define Device/tl-wdr3600-v1
$(Device/tl-wdr3500-v1)
DEVICE_TITLE := TP-LINK TL-WDR3600 v1
BOARDNAME := TL-WDR4300
TPLINK_HWID := 0x36000001
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C US
endef
TARGET_DEVICES += tl-wdr3600-v1
define Device/tl-wdr4300-v1
$(Device/tl-wdr3600-v1)
DEVICE_TITLE := TP-LINK TL-WDR4300 v1
TPLINK_HWID := 0x43000001
endef
TARGET_DEVICES += tl-wdr4300-v1
define Device/tl-wdr4300-v1-il
$(Device/tl-wdr3500-v1)
DEVICE_TITLE := TP-LINK TL-WDR4300 v1 (IL)
BOARDNAME := TL-WDR4300
TPLINK_HWID := 0x43008001
endef
TARGET_DEVICES += tl-wdr4300-v1-il
define Device/tl-wdr4310-v1
$(Device/tl-wdr4300-v1-il)
DEVICE_TITLE := TP-LINK TL-WDR4310 v1
TPLINK_HWID := 0x43100001
endef
TARGET_DEVICES += tl-wdr4310-v1
define Device/tl-wdr4900-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WDR4900 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WDR4900-v2
DEVICE_PROFILE := TLWDR4900V2
TPLINK_HWID := 0x49000002
endef
TARGET_DEVICES += tl-wdr4900-v2
define Device/tl-wdr6500-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WDR6500 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma | tplink-v1-header
BOARDNAME := TL-WDR6500-v2
DEVICE_PROFILE := TLWDR6500V2
TPLINK_HWID := 0x65000002
TPLINK_HEADER_VERSION := 2
endef
TARGET_DEVICES += tl-wdr6500-v2
define Device/mw4530r-v1
$(Device/tl-wdr4300-v1)
DEVICE_TITLE := Mercury MW4530R v1
TPLINK_HWID := 0x45300001
endef
TARGET_DEVICES += mw4530r-v1
define Device/tl-wpa8630-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WPA8630 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := TL-WPA8630
DEVICE_PROFILE := TL-WPA8630
TPLINK_HWID := 0x86300001
endef
TARGET_DEVICES += tl-wpa8630-v1
define Device/tl-wr1041n-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR1041N v2
BOARDNAME := TL-WR1041N-v2
DEVICE_PROFILE := TLWR1041
TPLINK_HWID := 0x10410002
endef
TARGET_DEVICES += tl-wr1041n-v2
define Device/tl-wr1043n-v5
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK TL-WR1043N v5
BOARDNAME := TL-WR1043N-v5
SUPPORTED_DEVICES := tl-wr1043n-v5
DEVICE_PROFILE := TLWR1043
MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,15104k(firmware),128k(product-info)ro,640k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(art)ro
IMAGE_SIZE := 15104k
TPLINK_BOARD_ID := TLWR1043NV5
endef
TARGET_DEVICES += tl-wr1043n-v5
define Device/tl-wr1043nd-v1
$(Device/tplink-8m)
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR1043ND
DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430001
endef
TARGET_DEVICES += tl-wr1043nd-v1
define Device/tl-wr1043nd-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR1043ND-v2
DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430002
endef
TARGET_DEVICES += tl-wr1043nd-v2
define Device/tl-wr1043nd-v3
$(Device/tl-wr1043nd-v2)
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v3
TPLINK_HWID := 0x10430003
endef
TARGET_DEVICES += tl-wr1043nd-v3
define Device/tl-wr1043nd-v4
$(Device/tplink)
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v4
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR1043ND-v4
DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430004
MTDPARTS := spi0.0:128k(u-boot)ro,1536k(kernel),14016k(rootfs),128k(product-info)ro,320k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(ART)ro,15552k@0x20000(firmware)
IMAGE_SIZE := 15552k
TPLINK_BOARD_ID := TLWR1043NDV4
KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
TARGET_DEVICES += tl-wr1043nd-v4
define Device/tl-wr2543-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR2543N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR2543N
DEVICE_PROFILE := TLWR2543
TPLINK_HWID := 0x25430001
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99
endef
TARGET_DEVICES += tl-wr2543-v1
define Device/tl-wr703n-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR703N v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := TL-WR703N
DEVICE_PROFILE := TLWR703
TPLINK_HWID := 0x07030101
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wr703n-v1
define Device/tl-wr710n-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR710N v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := TL-WR710N
DEVICE_PROFILE := TLWR710
TPLINK_HWID := 0x07100001
CONSOLE := ttyATH0,115200
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C US
endef
TARGET_DEVICES += tl-wr710n-v1
define Device/tl-wr710n-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR710N v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := TL-WR710N
DEVICE_PROFILE := TLWR710
TPLINK_HWID := 0x07100002
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wr710n-v2
define Device/tl-wr710n-v2.1
$(Device/tl-wr710n-v1)
DEVICE_TITLE := TP-LINK TL-WR710N v2.1
TPLINK_HWID := 0x07100002
TPLINK_HWREV := 0x00000002
endef
TARGET_DEVICES += tl-wr710n-v2.1
define Device/tl-wr720n-v3
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR720N v3
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := TL-WR720N-v3
DEVICE_PROFILE := TLWR720
TPLINK_HWID := 0x07200103
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wr720n-v3
define Device/tl-wr720n-v4
$(Device/tl-wr720n-v3)
DEVICE_TITLE := TP-LINK TL-WR720N v4
TPLINK_HWID := 0x07200104
endef
TARGET_DEVICES += tl-wr720n-v4
define Device/tl-wr740n-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WR740N/ND v1
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR740
TPLINK_HWID := 0x07400001
endef
TARGET_DEVICES += tl-wr740n-v1
define Device/tl-wr740n-v3
$(Device/tl-wr740n-v1)
DEVICE_TITLE := TP-LINK TL-WR740N/ND v3
TPLINK_HWID := 0x07400003
endef
TARGET_DEVICES += tl-wr740n-v3
define Device/tl-wr740n-v4
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR740N/ND v4
BOARDNAME := TL-WR741ND-v4
DEVICE_PROFILE := TLWR740
TPLINK_HWID := 0x07400004
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wr740n-v4
define Device/tl-wr740n-v5
$(Device/tl-wr740n-v4)
DEVICE_TITLE := TP-LINK TL-WR740N/ND v5
TPLINK_HWID := 0x07400005
endef
TARGET_DEVICES += tl-wr740n-v5
define Device/tl-wr740n-v6
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR740N/ND v6
BOARDNAME := TL-WR740N-v6
DEVICE_PROFILE := TLWR740
TPLINK_HWID := 0x07400006
endef
TARGET_DEVICES += tl-wr740n-v6
define Device/tl-wr741nd-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WR741N/ND v1
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR741
TPLINK_HWID := 0x07410001
endef
TARGET_DEVICES += tl-wr741nd-v1
define Device/tl-wr741nd-v2
$(Device/tl-wr741nd-v1)
DEVICE_TITLE := TP-LINK TL-WR741N/ND v2
endef
TARGET_DEVICES += tl-wr741nd-v2
define Device/tl-wr741nd-v4
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR741N/ND v4
BOARDNAME := TL-WR741ND-v4
DEVICE_PROFILE := TLWR741
TPLINK_HWID := 0x07410004
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wr741nd-v4
define Device/tl-wr741nd-v5
$(Device/tl-wr741nd-v4)
DEVICE_TITLE := TP-LINK TL-WR741N/ND v5
TPLINK_HWID := 0x07400005
endef
TARGET_DEVICES += tl-wr741nd-v5
define Device/tl-wr743nd-v1
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WR743N/ND v1
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR743
TPLINK_HWID := 0x07430001
endef
TARGET_DEVICES += tl-wr743nd-v1
define Device/tl-wr743nd-v2
$(Device/tl-wr741nd-v4)
DEVICE_TITLE := TP-LINK TL-WR743N/ND v2
DEVICE_PROFILE := TLWR743
TPLINK_HWID := 0x07430002
endef
TARGET_DEVICES += tl-wr743nd-v2
define Device/tl-wr802n-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR802N v1
BOARDNAME := TL-WR802N-v1
DEVICE_PROFILE := TLWR802
TPLINK_HWID := 0x08020001
TPLINK_HWREV := 1
endef
TARGET_DEVICES += tl-wr802n-v1
define Device/tl-wr802n-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR802N v2
BOARDNAME := TL-WR802N-v2
DEVICE_PROFILE := TLWR802
TPLINK_HWID := 0x08020002
TPLINK_HWREV := 2
IMAGES += factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tl-wr802n-v2
define Device/tl-wr810n-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR810N v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := TL-WR810N
DEVICE_PROFILE := TLWR810
TPLINK_HWID := 0x08100001
endef
TARGET_DEVICES += tl-wr810n-v1
define Device/tl-wr810n-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR810N v2
BOARDNAME := TL-WR810N-v2
DEVICE_PROFILE := TLWR810
TPLINK_HWID := 0x08100002
endef
TARGET_DEVICES += tl-wr810n-v2
define Device/tl-wr840n-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR840N v2
BOARDNAME := TL-WR840N-v2
DEVICE_PROFILE := TLWR840
TPLINK_HWID := 0x08400002
IMAGES += factory-eu.bin
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tl-wr840n-v2
define Device/tl-wr840n-v3
$(Device/tl-wr840n-v2)
DEVICE_TITLE := TP-LINK TL-WR840N v3
BOARDNAME := TL-WR840N-v3
TPLINK_HWID := 0x08400003
endef
TARGET_DEVICES += tl-wr840n-v3
define Device/tl-wr841-v1.5
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WR841N/ND v1.5
BOARDNAME := TL-WR841N-v1.5
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410002
TPLINK_HWREV := 2
endef
TARGET_DEVICES += tl-wr841-v1.5
define Device/tl-wr841-v3
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WR841N/ND v3
BOARDNAME := TL-WR941ND
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410003
TPLINK_HWREV := 3
endef
TARGET_DEVICES += tl-wr841-v3
define Device/tl-wr841-v5
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WR841N/ND v5
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410005
endef
TARGET_DEVICES += tl-wr841-v5
define Device/tl-wr841-v7
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WR841N/ND v7
BOARDNAME := TL-WR841N-v7
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410007
endef
TARGET_DEVICES += tl-wr841-v7
define Device/tl-wr841-v8
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR841N/ND v8
BOARDNAME := TL-WR841N-v8
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410008
endef
TARGET_DEVICES += tl-wr841-v8
define Device/tl-wr841-v9
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR841N/ND v9
BOARDNAME := TL-WR841N-v9
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410009
endef
TARGET_DEVICES += tl-wr841-v9
define Device/tl-wr841-v10
$(Device/tl-wr841-v9)
DEVICE_TITLE := TP-LINK TL-WR841N/ND v10
TPLINK_HWID := 0x08410010
endef
TARGET_DEVICES += tl-wr841-v10
define Device/tl-wr841-v11
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR841N/ND v11
BOARDNAME := TL-WR841N-v11
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08410011
IMAGES += factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tl-wr841-v11
define Device/tl-wr841-v12
$(Device/tl-wr841-v11)
DEVICE_TITLE := TP-LINK TL-WR841N/ND v12
TPLINK_HWID := 0x08410012
endef
TARGET_DEVICES += tl-wr841-v12
define Device/tl-wr842n-v1
$(Device/tplink-8m)
DEVICE_TITLE := TP-LINK TL-WR842N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-MR3420
DEVICE_PROFILE := TLWR842
TPLINK_HWID := 0x08420001
endef
TARGET_DEVICES += tl-wr842n-v1
define Device/tl-wr842n-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR842N/ND v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR842N-v2
DEVICE_PROFILE := TLWR842
TPLINK_HWID := 0x8420002
endef
TARGET_DEVICES += tl-wr842n-v2
define Device/tl-wr842n-v3
$(Device/tplink-16mlzma)
DEVICE_TITLE := TP-LINK TL-WR842N/ND v3
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR842N-v3
DEVICE_PROFILE := TLWR842
TPLINK_HWID := 0x08420003
endef
TARGET_DEVICES += tl-wr842n-v3
define Device/tl-wr843nd-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR843N/ND v1
BOARDNAME := TL-WR841N-v8
DEVICE_PROFILE := TLWR843
TPLINK_HWID := 0x08430001
endef
TARGET_DEVICES += tl-wr843nd-v1
define Device/tl-wr847n-v8
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR847N/ND v8
BOARDNAME := TL-WR841N-v8
DEVICE_PROFILE := TLWR841
TPLINK_HWID := 0x08470008
endef
TARGET_DEVICES += tl-wr847n-v8
define Device/tl-wr902ac-v1
DEVICE_TITLE := TP-LINK TL-WR902AC v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport \
kmod-ath10k ath10k-firmware-qca9887 -swconfig -uboot-envtools
BOARDNAME := TL-WR902AC-V1
DEVICE_PROFILE := TLWR902
TPLINK_BOARD_ID := TL-WR902AC-V1
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
TPLINK_HEADER_VERSION := 1
SUPPORTED_DEVICES := tl-wr902ac-v1
IMAGE_SIZE := 7360k
KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
append-metadata | check-size $$$$(IMAGE_SIZE)
MTDPARTS := spi0.0:128k(u-boot)ro,7360k(firmware),640k(tplink)ro,64k(art)ro
endef
TARGET_DEVICES += tl-wr902ac-v1
define Device/tl-wr940n-v4
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR940N v4
BOARDNAME := TL-WR940N-v4
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09400004
IMAGES += factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tl-wr940n-v4
define Device/tl-wr941nd-v2
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WR941N/ND v2
BOARDNAME := TL-WR941ND
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410002
TPLINK_HWREV := 2
endef
TARGET_DEVICES += tl-wr941nd-v2
define Device/tl-wr941nd-v3
$(Device/tl-wr941nd-v2)
DEVICE_TITLE := TP-LINK TL-WR941N/ND v3
endef
TARGET_DEVICES += tl-wr941nd-v3
define Device/tl-wr941nd-v4
$(Device/tplink-4m)
DEVICE_TITLE := TP-LINK TL-WR941N/ND v4
BOARDNAME := TL-WR741ND
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410004
endef
TARGET_DEVICES += tl-wr941nd-v4
define Device/tl-wr941nd-v5
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR941N/ND v5
BOARDNAME := TL-WR941ND-v5
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410005
endef
TARGET_DEVICES += tl-wr941nd-v5
define Device/tl-wr941nd-v6
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR941N/ND v6
BOARDNAME := TL-WR941ND-v6
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410006
endef
TARGET_DEVICES += tl-wr941nd-v6
# Chinese version (unlike European) is similar to the TL-WDR3500
define Device/tl-wr941nd-v6-cn
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR941N/ND v6 (CN)
BOARDNAME := TL-WDR3500
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410006
endef
TARGET_DEVICES += tl-wr941nd-v6-cn
ar71xx: add support for TP-Link TL-WR942N v1 TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on Qualcomm/Atheros QCA9561. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x USB 2.0 - 11x LED (most are controlled by 74HC595) - 2x button - UART header on PCB* * Serial console is disabled in OEM non-beta firmwares and corresponding GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by production (non-beta) U-Boot and firmware. Currently not working: 1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs by some U-Boot versions. Flash instruction under vendor GUI: 1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin". 2. Go to WEB interface and perform usual firmware upgrade. FLash instruction under U-Boot recovery mode (doesn't work in beta firmware): 1. Setup PC with static IP "192.168.0.66/24" and tftp server. 2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make it available to download from your tftp server. 3. Press "reset" button and power up the router, wait till "WPS" LED turns on. Flash instruction under U-Boot, using UART (can be done only with preinstalled UART-enabled U-Boot version!): 1. Use "tpl" to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Signed-off-by: Serg Studzinskii <serguzhg@gmail.com> [minor code style fixes, extended commit message] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-08 20:10:05 +00:00
define Device/tl-wr942n-v1
DEVICE_TITLE := TP-LINK TL-WR942N v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR942N-V1
TPLINK_BOARD_ID := TLWR942NV1
ar71xx: add support for TP-Link TL-WR942N v1 TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on Qualcomm/Atheros QCA9561. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x USB 2.0 - 11x LED (most are controlled by 74HC595) - 2x button - UART header on PCB* * Serial console is disabled in OEM non-beta firmwares and corresponding GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by production (non-beta) U-Boot and firmware. Currently not working: 1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs by some U-Boot versions. Flash instruction under vendor GUI: 1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin". 2. Go to WEB interface and perform usual firmware upgrade. FLash instruction under U-Boot recovery mode (doesn't work in beta firmware): 1. Setup PC with static IP "192.168.0.66/24" and tftp server. 2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make it available to download from your tftp server. 3. Press "reset" button and power up the router, wait till "WPS" LED turns on. Flash instruction under U-Boot, using UART (can be done only with preinstalled UART-enabled U-Boot version!): 1. Use "tpl" to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Signed-off-by: Serg Studzinskii <serguzhg@gmail.com> [minor code style fixes, extended commit message] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-08 20:10:05 +00:00
DEVICE_PROFILE := TLWR942
IMAGE_SIZE := 14464k
KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
append-metadata | check-size $$$$(IMAGE_SIZE)
ar71xx: add support for TP-Link TL-WR942N v1 TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on Qualcomm/Atheros QCA9561. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x USB 2.0 - 11x LED (most are controlled by 74HC595) - 2x button - UART header on PCB* * Serial console is disabled in OEM non-beta firmwares and corresponding GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by production (non-beta) U-Boot and firmware. Currently not working: 1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs by some U-Boot versions. Flash instruction under vendor GUI: 1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin". 2. Go to WEB interface and perform usual firmware upgrade. FLash instruction under U-Boot recovery mode (doesn't work in beta firmware): 1. Setup PC with static IP "192.168.0.66/24" and tftp server. 2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make it available to download from your tftp server. 3. Press "reset" button and power up the router, wait till "WPS" LED turns on. Flash instruction under U-Boot, using UART (can be done only with preinstalled UART-enabled U-Boot version!): 1. Use "tpl" to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Signed-off-by: Serg Studzinskii <serguzhg@gmail.com> [minor code style fixes, extended commit message] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-08 20:10:05 +00:00
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
MTDPARTS := spi0.0:128k(u-boot)ro,14464k(firmware),64k(product-info)ro,64k(partition-table)ro,256k(oem-config)ro,1344k(oem-vars)ro,64k(ART)ro
SUPPORTED_DEVICES := tl-wr942n-v1
ar71xx: add support for TP-Link TL-WR942N v1 TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on Qualcomm/Atheros QCA9561. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x USB 2.0 - 11x LED (most are controlled by 74HC595) - 2x button - UART header on PCB* * Serial console is disabled in OEM non-beta firmwares and corresponding GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by production (non-beta) U-Boot and firmware. Currently not working: 1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs by some U-Boot versions. Flash instruction under vendor GUI: 1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin". 2. Go to WEB interface and perform usual firmware upgrade. FLash instruction under U-Boot recovery mode (doesn't work in beta firmware): 1. Setup PC with static IP "192.168.0.66/24" and tftp server. 2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make it available to download from your tftp server. 3. Press "reset" button and power up the router, wait till "WPS" LED turns on. Flash instruction under U-Boot, using UART (can be done only with preinstalled UART-enabled U-Boot version!): 1. Use "tpl" to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Signed-off-by: Serg Studzinskii <serguzhg@gmail.com> [minor code style fixes, extended commit message] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-08 20:10:05 +00:00
endef
TARGET_DEVICES += tl-wr942n-v1