openwrtv4/package/boot/uboot-layerscape/patches/0059-armv8-ls1012a-Make-FAT-and-EXT2-commands-support-com.patch

From 4df84c450d7ce450986e5f1dc5e7ab164b9e0e32 Mon Sep 17 00:00:00 2001
From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Date: Fri, 17 Jun 2016 10:04:34 +0530
Subject: [PATCH 59/93] armv8: ls1012a: Make FAT and EXT2 commands support
 common

Makes FAT and EXT2 commands support common for LS1012A QDS,
RDB and FRDM.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
 include/configs/ls1012a_common.h |    5 +++++
 include/configs/ls1012afrdm.h    |    1 -
 include/configs/ls1012aqds.h     |    6 ------
 include/configs/ls1012ardb.h     |    6 ------
 4 files changed, 5 insertions(+), 13 deletions(-)

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 2895e7a..7c0e64f 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -184,6 +184,11 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMDLINE_TAG
 
+/* Used by SCSI, MMC and USB */
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __LS1012A_COMMON_H */
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index 5e619c1..432317d 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -38,7 +38,6 @@
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
-#define CONFIG_CMD_EXT2
 
 #define CONFIG_USB_DWC3
 #define CONFIG_USB_DWC3_GADGET
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index cc8e0fc..c06cfbd 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -34,8 +34,6 @@
 #define CONFIG_FSL_ESDHC_1_NON_REMOVABLE_CARD
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #endif
 #endif /* CONFIG_EMU */
 
@@ -45,9 +43,6 @@
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_CMD_SCSI
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_DOS_PARTITION
 #define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
@@ -204,7 +199,6 @@
 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
-#define CONFIG_CMD_EXT2
 
 #define CONFIG_USB_DWC3
 #define CONFIG_USB_DWC3_GADGET
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index e94df74..f6b3f28 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -39,7 +39,6 @@
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
-#define CONFIG_CMD_EXT2
 
 #define CONFIG_USB_DWC3
 #define CONFIG_USB_DWC3_GADGET
@@ -67,8 +66,6 @@
 #define CONFIG_FSL_ESDHC_1_NON_REMOVABLE_CARD
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #endif
 #endif /* CONFIG_EMU */
 
@@ -78,9 +75,6 @@
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_CMD_SCSI
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_DOS_PARTITION
 #define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
-- 
1.7.9.5
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com> 2016-10-28 16:18:23 +00:00			`From 4df84c450d7ce450986e5f1dc5e7ab164b9e0e32 Mon Sep 17 00:00:00 2001`
			`From: Rajesh Bhagat <rajesh.bhagat@nxp.com>`
			`Date: Fri, 17 Jun 2016 10:04:34 +0530`
			`Subject: [PATCH 59/93] armv8: ls1012a: Make FAT and EXT2 commands support`
			`common`

			`Makes FAT and EXT2 commands support common for LS1012A QDS,`
			`RDB and FRDM.`

			`Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>`
			`---`
			`include/configs/ls1012a_common.h \| 5 +++++`
			`include/configs/ls1012afrdm.h \| 1 -`
			`include/configs/ls1012aqds.h \| 6 ------`
			`include/configs/ls1012ardb.h \| 6 ------`
			`4 files changed, 5 insertions(+), 13 deletions(-)`

			`diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h`
			`index 2895e7a..7c0e64f 100644`
			`--- a/include/configs/ls1012a_common.h`
			`+++ b/include/configs/ls1012a_common.h`
			`@@ -184,6 +184,11 @@`
			`#define CONFIG_CMD_BOOTZ`
			`#define CONFIG_CMDLINE_TAG`

			`+/* Used by SCSI, MMC and USB */`
			`+#define CONFIG_CMD_FAT`
			`+#define CONFIG_DOS_PARTITION`
			`+#define CONFIG_CMD_EXT2`
			`+`
			`#include <asm/fsl_secure_boot.h>`

			`#endif /* __LS1012A_COMMON_H */`
			`diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h`
			`index 5e619c1..432317d 100644`
			`--- a/include/configs/ls1012afrdm.h`
			`+++ b/include/configs/ls1012afrdm.h`
			`@@ -38,7 +38,6 @@`
			`#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2`
			`#define CONFIG_CMD_USB`
			`#define CONFIG_USB_STORAGE`
			`-#define CONFIG_CMD_EXT2`

			`#define CONFIG_USB_DWC3`
			`#define CONFIG_USB_DWC3_GADGET`
			`diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h`
			`index cc8e0fc..c06cfbd 100644`
			`--- a/include/configs/ls1012aqds.h`
			`+++ b/include/configs/ls1012aqds.h`
			`@@ -34,8 +34,6 @@`
			`#define CONFIG_FSL_ESDHC_1_NON_REMOVABLE_CARD`
			`#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33`
			`#define CONFIG_GENERIC_MMC`
			`-#define CONFIG_CMD_FAT`
			`-#define CONFIG_DOS_PARTITION`
			`#endif`
			`#endif /* CONFIG_EMU */`

			`@@ -45,9 +43,6 @@`
			`#define CONFIG_SCSI_AHCI`
			`#define CONFIG_SCSI_AHCI_PLAT`
			`#define CONFIG_CMD_SCSI`
			`-#define CONFIG_CMD_FAT`
			`-#define CONFIG_CMD_EXT2`
			`-#define CONFIG_DOS_PARTITION`
			`#define CONFIG_BOARD_LATE_INIT`

			`#define CONFIG_SYS_SATA AHCI_BASE_ADDR`
			`@@ -204,7 +199,6 @@`
			`#if defined(CONFIG_HAS_FSL_DR_USB) \|\| defined(CONFIG_HAS_FSL_XHCI_USB)`
			`#define CONFIG_CMD_USB`
			`#define CONFIG_USB_STORAGE`
			`-#define CONFIG_CMD_EXT2`

			`#define CONFIG_USB_DWC3`
			`#define CONFIG_USB_DWC3_GADGET`
			`diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h`
			`index e94df74..f6b3f28 100644`
			`--- a/include/configs/ls1012ardb.h`
			`+++ b/include/configs/ls1012ardb.h`
			`@@ -39,7 +39,6 @@`
			`#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2`
			`#define CONFIG_CMD_USB`
			`#define CONFIG_USB_STORAGE`
			`-#define CONFIG_CMD_EXT2`

			`#define CONFIG_USB_DWC3`
			`#define CONFIG_USB_DWC3_GADGET`
			`@@ -67,8 +66,6 @@`
			`#define CONFIG_FSL_ESDHC_1_NON_REMOVABLE_CARD`
			`#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33`
			`#define CONFIG_GENERIC_MMC`
			`-#define CONFIG_CMD_FAT`
			`-#define CONFIG_DOS_PARTITION`
			`#endif`
			`#endif /* CONFIG_EMU */`

			`@@ -78,9 +75,6 @@`
			`#define CONFIG_SCSI_AHCI`
			`#define CONFIG_SCSI_AHCI_PLAT`
			`#define CONFIG_CMD_SCSI`
			`-#define CONFIG_CMD_FAT`
			`-#define CONFIG_CMD_EXT2`
			`-#define CONFIG_DOS_PARTITION`
			`#define CONFIG_BOARD_LATE_INIT`

			`#define CONFIG_SYS_SATA AHCI_BASE_ADDR`
			`--`
			`1.7.9.5`