KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/package/boot/uboot-layerscape/patches/0049-DNCPE-296-PFE-reset-woraround-fix.patch

328 lines
12 KiB
Diff
Raw Normal View History

layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
From 1b9cf577511123dd05e1d3b1fe7fd5db43b6097f Mon Sep 17 00:00:00 2001
From: Anji J <anji.jagarlmudi@freescale.com>
Date: Wed, 25 May 2016 13:40:13 +0530
Subject: [PATCH 49/93] DNCPE-296 PFE reset woraround fix
- Linux driver depends on U-boot TMU initialization,
but U-boot tmu initialization is not as expected by Linux driver.
- Align U-boot TMU initialization with Linux driver
- LLM base address in DDR changed to match with Linux driver expectation.
- Remove unwanted pfe_mod.h
- Start PFE/network at bootup time.
---
common/cmd_pfe_commands.c | 9 +-
drivers/net/pfe_eth/pfe.c | 16 ++--
drivers/net/pfe_eth/pfe/cbus/tmu_csr.h | 7 ++
drivers/net/pfe_eth/pfe_eth.h | 9 +-
drivers/net/pfe_eth/pfe_mod.h | 140 --------------------------------
include/configs/ls1012a_common.h | 1 -
6 files changed, 24 insertions(+), 158 deletions(-)
delete mode 100644 drivers/net/pfe_eth/pfe_mod.h
diff --git a/common/cmd_pfe_commands.c b/common/cmd_pfe_commands.c
index 0e22097..ca479d7 100644
--- a/common/cmd_pfe_commands.c
+++ b/common/cmd_pfe_commands.c
@@ -932,7 +932,7 @@ static void send_dummy_pkt_to_hif(void)
/*Allocate BMU2 buffer */
buf = readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL);
- printf("Sending a dummy pkt to HIF %x\n", buf);
+ debug("Sending a dummy pkt to HIF %x\n", buf);
buf += 0x80;
memcpy((void *)DDR_PFE_TO_VIRT(buf), dummy_pkt, sizeof(dummy_pkt));
/*Write length and pkt to TMU*/
@@ -945,14 +945,13 @@ static void pfe_command_stop(int argc, char * const argv[])
{
int id;
u32 rx_status;
- printf("Stopping PFE \n");
+ printf("Stopping PFE... \n");
/*Mark all descriptors as LAST_BD */
hif_rx_desc_disable();
/*If HIF Rx BDP is busy send a dummy packet */
rx_status = readl(HIF_RX_STATUS);
- printf("rx_status %x %x\n",rx_status, BDP_CSR_RX_DMA_ACTV);
if(rx_status & BDP_CSR_RX_DMA_ACTV)
send_dummy_pkt_to_hif();
udelay(10);
@@ -964,12 +963,10 @@ static void pfe_command_stop(int argc, char * const argv[])
for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++)
{
- printf("Stop %d\n", id);
/*Inform PE to stop */
pe_dmem_write(id, cpu_to_be32(1), PEMBOX_ADDR_CLASS, 4);
udelay(10);
- printf("Reading %d\n", id);
/*Read status */
if(!pe_dmem_read(id, PEMBOX_ADDR_CLASS+4, 4))
printf("Failed to stop PE%d\n", id);
@@ -979,12 +976,10 @@ static void pfe_command_stop(int argc, char * const argv[])
{
if(id == TMU2_ID) continue;
- printf("Stop %d\n", id);
/*Inform PE to stop */
pe_dmem_write(id, 1, PEMBOX_ADDR_TMU, 4);
udelay(10);
- printf("Reading %d\n", id);
/*Read status */
if(!pe_dmem_read(id, PEMBOX_ADDR_TMU+4, 4))
printf("Failed to stop PE%d\n", id);
diff --git a/drivers/net/pfe_eth/pfe.c b/drivers/net/pfe_eth/pfe.c
index 3b5570a..2c31cad 100644
--- a/drivers/net/pfe_eth/pfe.c
+++ b/drivers/net/pfe_eth/pfe.c
@@ -1489,17 +1489,16 @@ void tmu_init(TMU_CFG *cfg)
writel(0x3FF, TMU_TDQ2_SCH_CTRL);
#endif
writel(0x3FF, TMU_TDQ3_SCH_CTRL);
-
-
+
if (PLL_CLK_EN == 0)
writel(0x0, TMU_PE_SYS_CLK_RATIO); // Clock ratio: for 1:1 the value is 0
else
writel(0x1, TMU_PE_SYS_CLK_RATIO); // Clock ratio: for 1:2 the value is 1
- //printf("TMU_LLM_BASE_ADDR %x\n", cfg->llm_base_addr);
+ debug("TMU_LLM_BASE_ADDR %x\n", cfg->llm_base_addr);
writel(cfg->llm_base_addr, TMU_LLM_BASE_ADDR); // Extra packet pointers will be stored from this address onwards
-
- //printf("TMU_LLM_QUE_LEN %x\n", cfg->llm_queue_len);
+
+ debug("TMU_LLM_QUE_LEN %x\n", cfg->llm_queue_len);
writel(cfg->llm_queue_len, TMU_LLM_QUE_LEN);
writel(5, TMU_TDQ_IIFG_CFG);
writel(DDR_BUF_SIZE, TMU_BMU_BUF_SIZE);
@@ -1531,7 +1530,12 @@ void tmu_init(TMU_CFG *cfg)
u32 qmax;
writel((phyno << 8) | q, TMU_TEQ_CTRL);
writel(1 << 22, TMU_TEQ_QCFG);
- qmax = ((phyno == 3) || (q < 8)) ? 255 : 127;
+
+ if (phyno == 3)
+ qmax = DEFAULT_TMU3_QDEPTH;
+ else
+ qmax = (q == 0) ? DEFAULT_Q0_QDEPTH : DEFAULT_MAX_QDEPTH;
+
writel(qmax << 18, TMU_TEQ_HW_PROB_CFG2);
writel(qmax >> 14, TMU_TEQ_HW_PROB_CFG3);
}
diff --git a/drivers/net/pfe_eth/pfe/cbus/tmu_csr.h b/drivers/net/pfe_eth/pfe/cbus/tmu_csr.h
index cbcbb1f..64fad04 100644
--- a/drivers/net/pfe_eth/pfe/cbus/tmu_csr.h
+++ b/drivers/net/pfe_eth/pfe/cbus/tmu_csr.h
@@ -93,10 +93,17 @@
#define MEM_INIT_DONE (1 << 7)
#define LLM_INIT (1 << 8)
#define LLM_INIT_DONE (1 << 9)
+#define ECC_MEM_INIT_DONE (1<<10)
typedef struct {
u32 llm_base_addr;
u32 llm_queue_len;
} TMU_CFG;
+/* Not HW related for pfe_ctrl / pfe common defines */
+#define DEFAULT_MAX_QDEPTH 80
+#define DEFAULT_Q0_QDEPTH 511 //We keep one large queue for host tx qos
+#define DEFAULT_TMU3_QDEPTH 127
+
+
#endif /* _TMU_CSR_H_ */
diff --git a/drivers/net/pfe_eth/pfe_eth.h b/drivers/net/pfe_eth/pfe_eth.h
index dfcc00e..c16b8c0 100644
--- a/drivers/net/pfe_eth/pfe_eth.h
+++ b/drivers/net/pfe_eth/pfe_eth.h
@@ -39,11 +39,8 @@
#define BMU2_BUF_COUNT (3 * SZ_1K)
#define BMU2_DDR_SIZE (DDR_BUF_SIZE * BMU2_BUF_COUNT)
-#define TMU_LLM_BASEADDR (BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
-#define TMU_LLM_QUEUE_LEN (16 * 256) /**< Must be power of two and at least 16 * 8 = 128 bytes */
-#define TMU_LLM_SIZE (4 * 16 * TMU_LLM_QUEUE_LEN) /**< (4 TMU's x 16 queues x queue_len) */
-#define HIF_RX_PKT_DDR_BASEADDR (TMU_LLM_BASEADDR + TMU_LLM_SIZE)
+#define HIF_RX_PKT_DDR_BASEADDR (BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
#define HIF_RX_PKT_DDR_SIZE (HIF_RX_DESC_NT * DDR_BUF_SIZE)
#define HIF_TX_PKT_DDR_BASEADDR (HIF_RX_PKT_DDR_BASEADDR + HIF_RX_PKT_DDR_SIZE)
#define HIF_TX_PKT_DDR_SIZE (HIF_TX_DESC_NT * DDR_BUF_SIZE)
@@ -72,6 +69,10 @@
#define TMU_DDR_DATA_BASEADDR (CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE)
#define TMU_DDR_DATA_SIZE (32 * SZ_1K)
+#define TMU_LLM_BASEADDR (TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
+#define TMU_LLM_QUEUE_LEN (16 * 256) /**< Must be power of two and at least 16 * 8 = 128 bytes */
+#define TMU_LLM_SIZE (4 * 16 * TMU_LLM_QUEUE_LEN) /**< (4 TMU's x 16 queues x queue_len) */
+
//#define ROUTE_TABLE_BASEADDR (TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
#define ROUTE_TABLE_BASEADDR 0x800000
#define ROUTE_TABLE_HASH_BITS_MAX 15 /**< 32K entries */
diff --git a/drivers/net/pfe_eth/pfe_mod.h b/drivers/net/pfe_eth/pfe_mod.h
deleted file mode 100644
index 9436b72..0000000
--- a/drivers/net/pfe_eth/pfe_mod.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * (C) Copyright 2011
- * Author : Mindspeed Technologes
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- * */
-
-
-#ifndef _PFE_MOD_H_
-#define _PFE_MOD_H_
-
-#include <linux/device.h>
-
-#include "pfe/pfe.h"
-#include "pfe/cbus.h"
-#include "pfe/cbus/bmu.h"
-
-#include "pfe_driver.h"
-
-struct pfe;
-
-
-struct pfe {
- unsigned long ddr_phys_baseaddr;
- void *ddr_baseaddr;
- void *cbus_baseaddr;
- void *apb_baseaddr;
- void *iram_baseaddr;
- int hif_irq;
- struct device *dev;
- struct pci_dev *pdev;
-
-#if 0
- struct pfe_ctrl ctrl;
- struct pfe_hif hif;
- struct pfe_eth eth;
-#endif
-};
-
-extern struct pfe *pfe;
-
-int pfe_probe(struct pfe *pfe);
-int pfe_remove(struct pfe *pfe);
-
-#ifndef SZ_1K
-#define SZ_1K 1024
-#endif
-
-#ifndef SZ_1M
-#define SZ_1M (1024 * 1024)
-#endif
-
-/* DDR Mapping */
-#if !defined(CONFIG_PLATFORM_PCI)
-#define UTIL_CODE_BASEADDR 0
-#define UTIL_CODE_SIZE (128 * SZ_1K)
-#define UTIL_DDR_DATA_BASEADDR (UTIL_CODE_BASEADDR + UTIL_CODE_SIZE)
-#define UTIL_DDR_DATA_SIZE (64 * SZ_1K)
-#define CLASS_DDR_DATA_BASEADDR (UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE)
-#define CLASS_DDR_DATA_SIZE (32 * SZ_1K)
-#define TMU_DDR_DATA_BASEADDR (CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE)
-#define TMU_DDR_DATA_SIZE (32 * SZ_1K)
-#define ROUTE_TABLE_BASEADDR (TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
-#define ROUTE_TABLE_HASH_BITS 15 /**< 32K entries */
-#define ROUTE_TABLE_SIZE ((1 << ROUTE_TABLE_HASH_BITS) * CLASS_ROUTE_SIZE)
-#define BMU2_DDR_BASEADDR (ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE)
-#define BMU2_BUF_COUNT (4096 - 256) /**< This is to get a total DDR size of 12MiB */
-#define BMU2_DDR_SIZE (DDR_BUF_SIZE * BMU2_BUF_COUNT)
-#define TMU_LLM_BASEADDR (BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
-#define TMU_LLM_QUEUE_LEN (16 * 256) /**< Must be power of two and at least 16 * 8 = 128 bytes */
-#define TMU_LLM_SIZE (4 * 16 * TMU_LLM_QUEUE_LEN) /**< (4 TMU's x 16 queues x queue_len) */
-
-#if (TMU_LLM_BASEADDR + TMU_LLM_SIZE) > 0xC00000
-#error DDR mapping above 12MiB
-#endif
-
-#else
-
-#define UTIL_CODE_BASEADDR 0
-#if defined(CONFIG_UTIL_PE_DISABLED)
-#define UTIL_CODE_SIZE (0 * SZ_1K)
-#else
-#define UTIL_CODE_SIZE (8 * SZ_1K)
-#endif
-#define UTIL_DDR_DATA_BASEADDR (UTIL_CODE_BASEADDR + UTIL_CODE_SIZE)
-#define UTIL_DDR_DATA_SIZE (0 * SZ_1K)
-#define CLASS_DDR_DATA_BASEADDR (UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE)
-#define CLASS_DDR_DATA_SIZE (0 * SZ_1K)
-#define TMU_DDR_DATA_BASEADDR (CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE)
-#define TMU_DDR_DATA_SIZE (0 * SZ_1K)
-#define ROUTE_TABLE_BASEADDR (TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
-#define ROUTE_TABLE_HASH_BITS 5 /**< 32 entries */
-#define ROUTE_TABLE_SIZE ((1 << ROUTE_TABLE_HASH_BITS) * CLASS_ROUTE_SIZE)
-#define BMU2_DDR_BASEADDR (ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE)
-#define BMU2_BUF_COUNT 8
-#define BMU2_DDR_SIZE (DDR_BUF_SIZE * BMU2_BUF_COUNT)
-#define TMU_LLM_BASEADDR (BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
-#define TMU_LLM_QUEUE_LEN (16 * 8) /**< Must be power of two and at least 16 * 8 = 128 bytes */
-#define TMU_LLM_SIZE (4 * 16 * TMU_LLM_QUEUE_LEN) /**< (4 TMU's x 16 queues x queue_len) */
-#define HIF_DESC_BASEADDR (TMU_LLM_BASEADDR + TMU_LLM_SIZE)
-#define HIF_RX_DESC_SIZE (16*HIF_RX_DESC_NT)
-#define HIF_TX_DESC_SIZE (16*HIF_TX_DESC_NT)
-#define HIF_DESC_SIZE (HIF_RX_DESC_SIZE + HIF_TX_DESC_SIZE)
-#define HIF_RX_PKT_DDR_BASEADDR (HIF_DESC_BASEADDR + HIF_DESC_SIZE)
-#define HIF_RX_PKT_DDR_SIZE (HIF_RX_DESC_NT * DDR_BUF_SIZE)
-#define HIF_TX_PKT_DDR_BASEADDR (HIF_RX_PKT_DDR_BASEADDR + HIF_RX_PKT_DDR_SIZE)
-#define HIF_TX_PKT_DDR_SIZE (HIF_TX_DESC_NT * DDR_BUF_SIZE)
-#define ROUTE_BASEADDR (HIF_TX_PKT_DDR_BASEADDR + HIF_TX_PKT_DDR_SIZE)
-#define ROUTE_SIZE (2 * CLASS_ROUTE_SIZE)
-
-#if (ROUTE_BASEADDR + ROUTE_SIZE) > 0x10000
-#error DDR mapping above 64KiB
-#endif
-
-#define PFE_HOST_TO_PCI(addr) (((u32)addr)- ((u32)DDR_BASE_ADDR))
-#define PFE_PCI_TO_HOST(addr) (((u32)addr)+ ((u32)DDR_BASE_ADDR))
-#endif
-
-/* LMEM Mapping */
-#define BMU1_LMEM_BASEADDR 0
-#define BMU1_BUF_COUNT 256
-#define BMU1_LMEM_SIZE (LMEM_BUF_SIZE * BMU1_BUF_COUNT)
-
-#endif /* _PFE_MOD_H */
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 3c4ab6c..57fc057 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -113,7 +113,6 @@
#define CONFIG_FSL_PPFE
#ifdef CONFIG_FSL_PPFE
-#define CONFIG_CMD_PFE_START
#define CONFIG_CMD_PFE_COMMANDS
#define CONFIG_UTIL_PE_DISABLED
--
1.7.9.5
Reference in a new issue Copy permalink