openwrtv4/target/linux/ramips/dts/mt7628an.dtsi

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "ralink,mtk7628an-soc";

	cpus {
		cpu@0 {
			compatible = "mips,mips24KEc";
		};
	};

	cpuintc: cpuintc@0 {
		#address-cells = <0>;
		#interrupt-cells = <1>;
		interrupt-controller;
		compatible = "mti,cpu-interrupt-controller";
	};

	palmbus@10000000 {
		compatible = "palmbus";
		reg = <0x10000000 0x200000>;
                ranges = <0x0 0x10000000 0x1FFFFF>;

		#address-cells = <1>;
		#size-cells = <1>;

		sysc@0 {
			compatible = "ralink,mt7620a-sysc";
			reg = <0x0 0x100>;
		};

		watchdog@120 {
			compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt";
			reg = <0x120 0x10>;

			resets = <&rstctrl 8>;
			reset-names = "wdt";

			interrupt-parent = <&intc>;
			interrupts = <24>;
		};

		intc: intc@200 {
			compatible = "ralink,mt7628an-intc", "ralink,rt2880-intc";
			reg = <0x200 0x100>;

			resets = <&rstctrl 9>;
			reset-names = "intc";

			interrupt-controller;
			#interrupt-cells = <1>;

			interrupt-parent = <&cpuintc>;
			interrupts = <2>;

			ralink,intc-registers = <0x9c 0xa0
						 0x6c 0xa4
						 0x80 0x78>;
		};

		memc@300 {
			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
			reg = <0x300 0x100>;

			resets = <&rstctrl 20>;
			reset-names = "mc";

			interrupt-parent = <&intc>;
			interrupts = <3>;
		};

		gpio@600 {
			#address-cells = <1>;
			#size-cells = <0>;

			compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio";
			reg = <0x600 0x100>;

			gpio0: bank@0 {
				reg = <0>;
				compatible = "mtk,mt7621-gpio-bank";
				gpio-controller;
				#gpio-cells = <2>;
			};

			gpio1: bank@1 {
				reg = <1>;
				compatible = "mtk,mt7621-gpio-bank";
				gpio-controller;
				#gpio-cells = <2>;
			};

			gpio2: bank@2 {
				reg = <2>;
				compatible = "mtk,mt7621-gpio-bank";
				gpio-controller;
				#gpio-cells = <2>;
			};
		};

		spi@b00 {
			compatible = "ralink,mt7621-spi";
			reg = <0xb00 0x100>;

			resets = <&rstctrl 18>;
			reset-names = "spi";

			#address-cells = <1>;
			#size-cells = <1>;

			pinctrl-names = "default";
			pinctrl-0 = <&spi_pins>;

			status = "disabled";
		};

		uartlite@c00 {
			compatible = "ns16550a";
			reg = <0xc00 0x100>;

			reg-shift = <2>;
			reg-io-width = <4>;
			no-loopback-test;

			resets = <&rstctrl 12>;
			reset-names = "uartl";

			interrupt-parent = <&intc>;
			interrupts = <20>;

			pinctrl-names = "default";
			pinctrl-0 = <&uart0_pins>;
		};
	};

	pinctrl {
		compatible = "ralink,rt2880-pinmux";
		pinctrl-names = "default";
		pinctrl-0 = <&state_default>;
		state_default: pinctrl0 {
		};
		spi_pins: spi {
			spi {
				ralink,group = "spi";
				ralink,function = "spi";
			};
		};
		uart0_pins: uartlite {
			uart {
				ralink,group = "uart0";
				ralink,function = "uart";
			};
		};
	};

	rstctrl: rstctrl {
		compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
		#reset-cells = <1>;
	};

	usbphy {
		compatible = "ralink,mt7628an-usbphy", "ralink,mt7620a-usbphy";

		resets = <&rstctrl 22>;
		reset-names = "host";
	};

	sdhci@10130000 {
		compatible = "ralink,mt7620-sdhci";
		reg = <0x10130000 4000>;

		interrupt-parent = <&intc>;
		interrupts = <14>;

		status = "disabled";
	};

	ehci@101c0000 {
		compatible = "ralink,rt3xxx-ehci";
		reg = <0x101c0000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <18>;
	};

	ohci@101c1000 {
		compatible = "ralink,rt3xxx-ohci";
		reg = <0x101c1000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <18>;
	};

	ethernet@10100000 {
		compatible = "ralink,rt5350-eth";
		reg = <0x10100000 10000>;

		interrupt-parent = <&cpuintc>;
		interrupts = <5>;

		resets = <&rstctrl 21 &rstctrl 23>;
		reset-names = "fe", "esw";
	};

	esw@10110000 {
		compatible = "ralink,rt3050-esw";
		reg = <0x10110000 8000>;

		resets = <&rstctrl 23>;
		reset-names = "esw";

		interrupt-parent = <&intc>;
		interrupts = <17>;
	};

	pcie@10140000 {
		compatible = "mediatek,mt7620-pci";
		reg = <0x10140000 0x100
			0x10142000 0x100>;

		#address-cells = <3>;
		#size-cells = <2>;

		resets = <&rstctrl 26>;
		reset-names = "pcie0";

		interrupt-parent = <&cpuintc>;
		interrupts = <4>;

		status = "disabled";

		device_type = "pci";

		bus-range = <0 255>;
		ranges = <
			0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
			0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
		>;

		pcie-bridge {
			reg = <0x0000 0 0 0 0>;

			#address-cells = <3>;
			#size-cells = <2>;

			device_type = "pci";
		};
	};

};