openwrtv4/target/linux/x86/image/Config.in

config X86_ETHERBOOT_IMAGES
	bool "Build Etherboot image"
	depends on TARGET_x86_thincan_DBE61
	default y
	help
	  Builds network bootable image for ThinCan DBE61 (Etherboot BIOS)

config X86_ETHERBOOT_BOOTOPTS
	string "Extra kernel boot options"
	depends on X86_ETHERBOOT_IMAGES
	default "ip=dhcp nbdport=2000 " if TARGET_ROOTFS_SQUASHFS
	default "ip=dhcp root=/dev/nfs nfsroot=192.168.0.1:/srv/dbe61"
	help
	  Kernel arguments to pass to the kernel eg. NFS root location etc.

config X86_GRUB_IMAGES
	bool "Build GRUB images (Linux x86 or x86_64 host only)"
	depends on TARGET_x86 && !(TARGET_x86_olpc || TARGET_x86_rdc)
	depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_ISO || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
	select PACKAGE_grub2
	default y

config X86_GRUB_CONSOLE
	bool "Use Console Terminal (in addition to Serial)"
	depends on X86_GRUB_IMAGES
	default n if (TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501 || TARGET_x86_geos || TARGET_x86_alix2)
	default y

config X86_GRUB_SERIAL
	string "Serial port device"
	depends on X86_GRUB_IMAGES
	default "hvc0" if TARGET_x86_xen_domu
	default "ttyS0" if ! TARGET_x86_xen_domu

config X86_GRUB_BAUDRATE
	int "Serial port baud rate"
	depends on X86_GRUB_IMAGES
	default 19200 if TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501
	default 38400 if TARGET_x86_alix2
	default 115200 if TARGET_x86_geos || TARGET_x86_kvm_guest
	default 38400

config X86_GRUB_BOOTOPTS
	string "Extra kernel boot options"
	depends on X86_GRUB_IMAGES
	default "xencons=hvc" if TARGET_x86_xen_domu
	help
	  If you don't know, just leave it blank.

config X86_GRUB_TIMEOUT
	string "Seconds to wait before booting the default entry"
	depends on X86_GRUB_IMAGES
	default "5"
	help
	  If you don't know, 5 seconds is a reasonable default.

config X86_VDI_IMAGES
	bool "Build VirtualBox image files (VDI)"
	select X86_GRUB_IMAGES
	select TARGET_ROOTFS_EXT4FS
	select PACKAGE_kmod-pcnet32

config X86_VMDK_IMAGES
	bool "Build VMware image files (VMDK)"
	select X86_GRUB_IMAGES
	select TARGET_ROOTFS_EXT4FS
	select PACKAGE_kmod-e1000


config OLPC_BOOTSCRIPT_IMAGES
	bool "Build images with bootscript"
	depends on TARGET_x86_olpc
	depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_ISO || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
	default TARGET_x86_olpc


config TARGET_IMAGES_PAD
	bool "Pad images to filesystem size (for JFFS2)"
	depends on OLPC_BOOTSCRIPT_IMAGES || X86_GRUB_IMAGES

config TARGET_IMAGES_GZIP
	bool "GZip images"
	depends on TARGET_IMAGES_PAD || TARGET_ROOTFS_EXT4FS
	default y

config TARGET_KERNEL_PARTSIZE
	int "Kernel partition size (in MB)"
	depends on OLPC_BOOTSCRIPT_IMAGES || X86_GRUB_IMAGES
	default 4

config TARGET_ROOTFS_PARTNAME
	string "Root partition on target device"
	depends on OLPC_BOOTSCRIPT_IMAGES || X86_GRUB_IMAGES
	default "/dev/vda2" if TARGET_x86_kvm_guest
	default "/dev/xvda2" if TARGET_x86_xen_domu
	default "/dev/sda2" if ! (TARGET_x86_kvm_guest || TARGET_x86_xen_domu)
	help
	  The root partition on the final device.  If you don't know,
	  you probably want the default (/dev/sda2).
* adds support for Artec Thincan Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com> SVN-Revision: 26919 2011-05-17 10:35:14 +00:00			`config X86_ETHERBOOT_IMAGES`
			`bool "Build Etherboot image"`
rationalize target image options Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38891 2013-11-22 09:44:14 +00:00			`depends on TARGET_x86_thincan_DBE61`
* adds support for Artec Thincan Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com> SVN-Revision: 26919 2011-05-17 10:35:14 +00:00			`default y`
			`help`
			`Builds network bootable image for ThinCan DBE61 (Etherboot BIOS)`

			`config X86_ETHERBOOT_BOOTOPTS`
			`string "Extra kernel boot options"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on X86_ETHERBOOT_IMAGES`
* adds support for Artec Thincan Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com> SVN-Revision: 26919 2011-05-17 10:35:14 +00:00			`default "ip=dhcp nbdport=2000 " if TARGET_ROOTFS_SQUASHFS`
			`default "ip=dhcp root=/dev/nfs nfsroot=192.168.0.1:/srv/dbe61"`
			`help`
			`Kernel arguments to pass to the kernel eg. NFS root location etc.`

add grub based images for x86-2.6 - still a bit hackish, but works with ext2 and jffs2 SVN-Revision: 4962 2006-10-08 15:48:56 +00:00			`config X86_GRUB_IMAGES`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`bool "Build GRUB images (Linux x86 or x86_64 host only)"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on TARGET_x86 && !(TARGET_x86_olpc \|\| TARGET_x86_rdc)`
			`depends on TARGET_ROOTFS_EXT4FS \|\| TARGET_ROOTFS_ISO \|\| TARGET_ROOTFS_JFFS2 \|\| TARGET_ROOTFS_SQUASHFS`
x86: add support for building grub2 images SVN-Revision: 33513 2012-09-22 20:10:42 +00:00			`select PACKAGE_grub2`
x86: remove grub-legacy SVN-Revision: 33640 2012-10-07 23:01:56 +00:00			`default y`
x86: add support for building grub2 images SVN-Revision: 33513 2012-09-22 20:10:42 +00:00
make console port editable through menuconfig, gzip ext2 images, add suitable defaults for Xen SVN-Revision: 19612 2010-02-12 19:04:12 +00:00			`config X86_GRUB_CONSOLE`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`bool "Use Console Terminal (in addition to Serial)"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on X86_GRUB_IMAGES`
PATCH: Disable console terminal in Grub for alix2 target The alix2 target has the VGA console for grub enabled by default. This prevents the grub menu from appearing on bootup. It is disabled by default for the other embedded x86 platforms. This patch corrects that behavior for the alix2 target. Signed-off-by: Adam Gensler <openwrt@kristenandadam.net> SVN-Revision: 31270 2012-04-12 23:30:27 +00:00			`default n if (TARGET_x86_generic_Soekris45xx \|\| TARGET_x86_generic_Soekris48xx \|\| TARGET_x86_net5501 \|\| TARGET_x86_geos \|\| TARGET_x86_alix2)`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`default y`
- clean up menu.lst template - make grub usage of vt0 selectable in menuconfig - choose appropriate default baudrate for soekris devices - fix generation of grub menu for iso images SVN-Revision: 19681 2010-02-17 00:59:41 +00:00
			`config X86_GRUB_SERIAL`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`string "Serial port device"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on X86_GRUB_IMAGES`
use ttyS0 @ 115200 baud as default for KVM guests SVN-Revision: 32384 2012-06-15 12:59:49 +00:00			`default "hvc0" if TARGET_x86_xen_domu`
			`default "ttyS0" if ! TARGET_x86_xen_domu`
make console port editable through menuconfig, gzip ext2 images, add suitable defaults for Xen SVN-Revision: 19612 2010-02-12 19:04:12 +00:00
add grub based images for x86-2.6 - still a bit hackish, but works with ext2 and jffs2 SVN-Revision: 4962 2006-10-08 15:48:56 +00:00			`config X86_GRUB_BAUDRATE`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`int "Serial port baud rate"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on X86_GRUB_IMAGES`
target/linux: fix Geos baudrate. (thank you Philip Prindeville) SVN-Revision: 23414 2010-10-12 15:27:34 +00:00			`default 19200 if TARGET_x86_generic_Soekris45xx \|\| TARGET_x86_generic_Soekris48xx \|\| TARGET_x86_net5501`
This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker. GPIO 1 : SIM select (Alix6) GPIO 6 : LED1 GPIO 25 : LED2 GPIO 27 : LED3 or RFKILL (Alix6) GPIO 24 : Soft switch 1 No kernel version bump. Added i2c-scx200-acb for lm-sensors support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 26879 2011-05-13 06:06:42 +00:00			`default 38400 if TARGET_x86_alix2`
use ttyS0 @ 115200 baud as default for KVM guests SVN-Revision: 32384 2012-06-15 12:59:49 +00:00			`default 115200 if TARGET_x86_geos \|\| TARGET_x86_kvm_guest`
* Make sure that Geos baud-rate defaults correctly Changeset 23414 somehow got reordered. The unconditional default trumps later settings. contributed by Philip Prindeville SVN-Revision: 25068 2011-01-22 23:10:51 +00:00			`default 38400`
add grub based images for x86-2.6 - still a bit hackish, but works with ext2 and jffs2 SVN-Revision: 4962 2006-10-08 15:48:56 +00:00
code to bring in the following for x86: X86_GRUB_ROOTPART: configureable root partition for kernel options X86_GRUB_BOOTOPTS: configureable parameters to be added to the boot line SVN-Revision: 5289 2006-10-24 22:33:23 +00:00			`config X86_GRUB_BOOTOPTS`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`string "Extra kernel boot options"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on X86_GRUB_IMAGES`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`default "xencons=hvc" if TARGET_x86_xen_domu`
			`help`
			`If you don't know, just leave it blank.`
Add virtualbox images to x86 (#3475) SVN-Revision: 11298 2008-05-30 16:50:37 +00:00
Make the grub timeout configurable on x86 targets Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de> SVN-Revision: 29786 2012-01-19 01:14:45 +00:00			`config X86_GRUB_TIMEOUT`
			`string "Seconds to wait before booting the default entry"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on X86_GRUB_IMAGES`
Make the grub timeout configurable on x86 targets Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de> SVN-Revision: 29786 2012-01-19 01:14:45 +00:00			`default "5"`
			`help`
			`If you don't know, 5 seconds is a reasonable default.`

Add virtualbox images to x86 (#3475) SVN-Revision: 11298 2008-05-30 16:50:37 +00:00			`config X86_VDI_IMAGES`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`bool "Build VirtualBox image files (VDI)"`
VMWare and VirtualBox images should select what they need, not depend on it.. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38892 2013-11-22 09:54:36 +00:00			`select X86_GRUB_IMAGES`
			`select TARGET_ROOTFS_EXT4FS`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`select PACKAGE_kmod-pcnet32`
Add virtualbox images to x86 (#3475) SVN-Revision: 11298 2008-05-30 16:50:37 +00:00
Add support for creating VMware vmdk images #1317 SVN-Revision: 13158 2008-11-09 17:39:09 +00:00			`config X86_VMDK_IMAGES`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`bool "Build VMware image files (VMDK)"`
VMWare and VirtualBox images should select what they need, not depend on it.. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38892 2013-11-22 09:54:36 +00:00			`select X86_GRUB_IMAGES`
			`select TARGET_ROOTFS_EXT4FS`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`select PACKAGE_kmod-e1000`

merge the olpc target with the x86 target, both tested and running SVN-Revision: 18279 2009-11-03 01:02:39 +00:00
			`config OLPC_BOOTSCRIPT_IMAGES`
target/x86: cleanup image config options SVN-Revision: 21365 2010-05-05 02:11:15 +00:00			`bool "Build images with bootscript"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on TARGET_x86_olpc`
			`depends on TARGET_ROOTFS_EXT4FS \|\| TARGET_ROOTFS_ISO \|\| TARGET_ROOTFS_JFFS2 \|\| TARGET_ROOTFS_SQUASHFS`
x86: image: select bootscript images by default for OLPC SVN-Revision: 31783 2012-05-18 09:57:29 +00:00			`default TARGET_x86_olpc`
merge the olpc target with the x86 target, both tested and running SVN-Revision: 18279 2009-11-03 01:02:39 +00:00

target/x86: use common config items for options shared between generic and olpc targets SVN-Revision: 21364 2010-05-05 02:07:38 +00:00			`config TARGET_IMAGES_PAD`
			`bool "Pad images to filesystem size (for JFFS2)"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on OLPC_BOOTSCRIPT_IMAGES \|\| X86_GRUB_IMAGES`
merge the olpc target with the x86 target, both tested and running SVN-Revision: 18279 2009-11-03 01:02:39 +00:00
Make gzipping of images configurable via menuconfig SVN-Revision: 30587 2012-02-16 17:53:57 +00:00			`config TARGET_IMAGES_GZIP`
			`bool "GZip images"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on TARGET_IMAGES_PAD \|\| TARGET_ROOTFS_EXT4FS`
Make gzipping of images configurable via menuconfig SVN-Revision: 30587 2012-02-16 17:53:57 +00:00			`default y`

target/x86: use common config items for options shared between generic and olpc targets SVN-Revision: 21364 2010-05-05 02:07:38 +00:00			`config TARGET_KERNEL_PARTSIZE`
			`int "Kernel partition size (in MB)"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on OLPC_BOOTSCRIPT_IMAGES \|\| X86_GRUB_IMAGES`
target/x86: use common config items for options shared between generic and olpc targets SVN-Revision: 21364 2010-05-05 02:07:38 +00:00			`default 4`
merge the olpc target with the x86 target, both tested and running SVN-Revision: 18279 2009-11-03 01:02:39 +00:00
target/x86: use common config items for options shared between generic and olpc targets SVN-Revision: 21364 2010-05-05 02:07:38 +00:00			`config TARGET_ROOTFS_PARTNAME`
			`string "Root partition on target device"`
build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351 2013-04-17 15:36:41 +00:00			`depends on OLPC_BOOTSCRIPT_IMAGES \|\| X86_GRUB_IMAGES`
adjust image defaults for KVM SVN-Revision: 22950 2010-09-06 02:31:37 +00:00			`default "/dev/vda2" if TARGET_x86_kvm_guest`
target/x86: use common config items for options shared between generic and olpc targets SVN-Revision: 21364 2010-05-05 02:07:38 +00:00			`default "/dev/xvda2" if TARGET_x86_xen_domu`
adjust image defaults for KVM SVN-Revision: 22950 2010-09-06 02:31:37 +00:00			`default "/dev/sda2" if ! (TARGET_x86_kvm_guest \|\| TARGET_x86_xen_domu)`
target/x86: use common config items for options shared between generic and olpc targets SVN-Revision: 21364 2010-05-05 02:07:38 +00:00			`help`
			`The root partition on the final device. If you don't know,`
			`you probably want the default (/dev/sda2).`