openwrtv4/target/linux/generic/patches-4.1/735-net-phy-at803x-fix-at8033-sgmii-mode.patch

97 lines
3 KiB
Diff
Raw Normal View History

--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -36,6 +36,9 @@
#define AT803X_INER 0x0012
#define AT803X_INER_INIT 0xec00
#define AT803X_INSR 0x0013
+#define AT803X_REG_CHIP_CONFIG 0x1f
+#define AT803X_BT_BX_REG_SEL 0x8000
+#define AT803X_SGMII_ANEG_EN 0x1000
#define AT803X_PCS_SMART_EEE_CTRL3 0x805D
#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3
@@ -49,9 +52,10 @@
#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
-#define ATH8030_PHY_ID 0x004dd076
-#define ATH8031_PHY_ID 0x004dd074
-#define ATH8035_PHY_ID 0x004dd072
+#define AT803X_PHY_ID_MASK 0xffffffef
+#define ATH8030_PHY_ID 0x004dd076
+#define ATH8031_PHY_ID 0x004dd074
+#define ATH8035_PHY_ID 0x004dd072
MODULE_DESCRIPTION("Atheros 803x PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
@@ -268,6 +272,27 @@ static int at803x_config_init(struct phy
{
struct at803x_platform_data *pdata;
int ret;
+ u32 v;
+
+ if (phydev->drv->phy_id == ATH8031_PHY_ID &&
+ phydev->interface == PHY_INTERFACE_MODE_SGMII)
+ {
+ v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
+ /* select SGMII/fiber page */
+ ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
+ v & ~AT803X_BT_BX_REG_SEL);
+ if (ret)
+ return ret;
+ /* enable SGMII autonegotiation */
+ ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
+ if (ret)
+ return ret;
+ /* select copper page */
+ ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
+ v | AT803X_BT_BX_REG_SEL);
+ if (ret)
+ return ret;
+ }
ret = genphy_config_init(phydev);
if (ret < 0)
@@ -394,7 +419,7 @@ static struct phy_driver at803x_driver[]
/* ATHEROS 8035 */
.phy_id = ATH8035_PHY_ID,
.name = "Atheros 8035 ethernet",
- .phy_id_mask = 0xffffffef,
+ .phy_id_mask = AT803X_PHY_ID_MASK,
.probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
@@ -413,7 +438,7 @@ static struct phy_driver at803x_driver[]
/* ATHEROS 8030 */
.phy_id = ATH8030_PHY_ID,
.name = "Atheros 8030 ethernet",
- .phy_id_mask = 0xffffffef,
+ .phy_id_mask = AT803X_PHY_ID_MASK,
.probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
@@ -431,8 +456,8 @@ static struct phy_driver at803x_driver[]
}, {
/* ATHEROS 8031 */
.phy_id = ATH8031_PHY_ID,
- .name = "Atheros 8031 ethernet",
- .phy_id_mask = 0xffffffef,
+ .name = "Atheros 8031/8033 ethernet",
+ .phy_id_mask = AT803X_PHY_ID_MASK,
.probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
@@ -454,9 +479,9 @@ static struct phy_driver at803x_driver[]
module_phy_driver(at803x_driver);
static struct mdio_device_id __maybe_unused atheros_tbl[] = {
- { ATH8030_PHY_ID, 0xffffffef },
- { ATH8031_PHY_ID, 0xffffffef },
- { ATH8035_PHY_ID, 0xffffffef },
+ { ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
+ { ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
+ { ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
{ }
};