openwrtv4/target/linux/ramips/dts/MT7620a_MT7530.dts

116 lines
1.8 KiB
Text
Raw Normal View History

/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620a + MT7530 evaluation board";
palmbus@10000000 {
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "s25fl064k";
reg = <0 0>;
linux,modalias = "m25p80", "s25fl064k";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
ralink,port-map = "llllw";
port@5 {
status = "okay";
ralink,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
phy1: ethernet-phy@1 {
reg = <1>;
phy-mode = "rgmii";
};
phy2: ethernet-phy@2 {
reg = <2>;
phy-mode = "rgmii";
};
phy3: ethernet-phy@3 {
reg = <3>;
phy-mode = "rgmii";
};
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
phy1f: ethernet-phy@1f {
reg = <0x1f>;
phy-mode = "rgmii";
};
};
};
gsw@10110000 {
ralink,port4 = "gmac";
};
pcie@10140000 {
status = "okay";
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
};