openwrtv4/target/linux/ramips/dts/WHR-G300N.dts

/dts-v1/;

/include/ "rt3050.dtsi"

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "WHR-G300N", "ralink,rt3052-soc";
	model = "Buffalo WHR-G300N";

	memorydetect {
		ralink,memory = <0x0 0x200000 0x4000000>;
	};

	chosen {
		bootargs = "console=ttyS0,57600";
	};

	palmbus@10000000 {
		sysc@0 {
			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
			ralink,uartmux = "gpio";
			ralink,wdtmux = <1>;
		};

		gpio0: gpio@600 {
			status = "okay";
		};
	};

	cfi@1f000000 {
		compatible = "cfi-flash";
		reg = <0x1f000000 0x800000>;

		bank-width = <2>;
		device-width = <2>;
		#address-cells = <1>;
		#size-cells = <1>;
	};

	ethernet@10100000 {
		status = "okay";
	};

	esw@10110000 {
		status = "okay";
		ralink,portmap = <0x2f>;
	};

	gpio-leds {
		compatible = "gpio-leds";
		diag {
			label = "whr-g300n:red:diag";
			gpios = <&gpio0 7 1>;
		};
		router {
			label = "whr-g300n:green:router";
			gpios = <&gpio0 9 1>;
		};
		security {
			label = "whr-g300n:amber:security";
			gpios = <&gpio0 14 1>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;
		reset {
			label = "reset";
			gpios = <&gpio0 10 1>;
			linux,code = <0x198>;
		};
		aoss {
			label = "aoss";
			gpios = <&gpio0 0 1>;
			linux,code = <0x211>;
		};
		router-off {
			label = "router-off";
			gpios = <&gpio0 11 1>;
			linux,code = <0x102>;
		};
		router-on {
			label = "router-on";
			gpios = <&gpio0 8 1>;
			linux,code = <0x103>;
		};
	};

	wmac@10180000 {
		status = "okay";
	};
};