openwrtv4/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch

From 2034addc7e193dc81d7ca60d8884832751b76758 Mon Sep 17 00:00:00 2001
From: Ajay Kishore <akisho@codeaurora.org>
Date: Tue, 24 Jan 2017 14:14:16 +0530
Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps

For IPQ806x targets, TZ protects the registers that are used to
configure the routing of interrupts to a target processor.
To resolve this, this patch uses scm call to route GPIO interrupts
to application processor. Also the scm call interface is changed.

Change-Id: Ib6c06829d04bc8c20483c36e63da92e26cdef9ce
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
---
 drivers/firmware/qcom_scm-32.c     | 17 +++++++++++++++++
 drivers/firmware/qcom_scm-64.c     |  9 +++++++++
 drivers/firmware/qcom_scm.c        | 13 +++++++++++++
 drivers/firmware/qcom_scm.h        |  8 ++++++++
 drivers/pinctrl/qcom/pinctrl-msm.c | 34 ++++++++++++++++++++++++++++------
 include/linux/qcom_scm.h           |  3 ++-
 6 files changed, 77 insertions(+), 7 deletions(-)

--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -560,3 +560,21 @@ int __qcom_scm_pas_mss_reset(struct devi
 
 	return ret ? : le32_to_cpu(out);
 }
+
+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
+{
+	s32 ret;
+
+	ret = qcom_scm_call_atomic1(svc_id, cmd_id, arg1);
+
+	return ret;
+}
+
+int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2)
+{
+	s32 ret;
+
+	ret = qcom_scm_call_atomic2(svc_id, cmd_id, arg1, arg2);
+ 
+ return ret;
+ }
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -365,3 +365,12 @@ int __qcom_scm_pas_mss_reset(struct devi
 
 	return ret ? : res.a1;
 }
+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
+{
+	return -ENOTSUPP;
+}
+
+int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2)
+{
+	return -ENOTSUPP;
+}
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -443,3 +443,16 @@ static int __init qcom_scm_init(void)
 	return platform_driver_register(&qcom_scm_driver);
 }
 subsys_initcall(qcom_scm_init);
+
+int qcom_scm_pinmux_read(u32 arg1)
+{
+	return __qcom_scm_pinmux_read(SCM_SVC_IO_ACCESS, SCM_IO_READ, arg1);
+}
+EXPORT_SYMBOL(qcom_scm_pinmux_read);
+
+int qcom_scm_pinmux_write(u32 arg1, u32 arg2)
+{
+	return __qcom_scm_pinmux_write(SCM_SVC_IO_ACCESS, SCM_IO_WRITE,
+					arg1, arg2);
+}
+EXPORT_SYMBOL(qcom_scm_pinmux_write);
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -56,6 +56,13 @@ extern int  __qcom_scm_pas_auth_and_rese
 extern int  __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
 extern int  __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
 
+#define SCM_IO_READ	1
+#define SCM_IO_WRITE	2
+#define SCM_SVC_IO_ACCESS	0x5
+
+s32 __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1);
+s32 __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2);
+
 /* common error codes */
 #define QCOM_SCM_V2_EBUSY	-12
 #define QCOM_SCM_ENOMEM		-5
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -30,7 +30,8 @@
 #include <linux/reboot.h>
 #include <linux/pm.h>
 #include <linux/log2.h>
-
+#include <linux/qcom_scm.h>
+#include <linux/io.h>
 #include "../core.h"
 #include "../pinconf.h"
 #include "pinctrl-msm.h"
@@ -635,6 +636,9 @@ static int msm_gpio_irq_set_type(struct
 	const struct msm_pingroup *g;
 	unsigned long flags;
 	u32 val;
+	u32 addr;
+	int ret;
+	const __be32 *reg;
 
 	g = &pctrl->soc->groups[d->hwirq];
 
@@ -648,11 +652,30 @@ static int msm_gpio_irq_set_type(struct
 	else
 		clear_bit(d->hwirq, pctrl->dual_edge_irqs);
 
+	ret = of_device_is_compatible(pctrl->dev->of_node,
+					"qcom,ipq8064-pinctrl");
 	/* Route interrupts to application cpu */
-	val = readl(pctrl->regs + g->intr_target_reg);
-	val &= ~(7 << g->intr_target_bit);
-	val |= g->intr_target_kpss_val << g->intr_target_bit;
-	writel(val, pctrl->regs + g->intr_target_reg);
+	if (!ret) {
+		val = readl(pctrl->regs + g->intr_target_reg);
+		val &= ~(7 << g->intr_target_bit);
+		val |= g->intr_target_kpss_val << g->intr_target_bit;
+		writel(val, pctrl->regs + g->intr_target_reg);
+	} else {
+		reg = of_get_property(pctrl->dev->of_node, "reg", NULL);
+		if (reg) {
+			addr = be32_to_cpup(reg) + g->intr_target_reg;
+			val = qcom_scm_pinmux_read(addr);
+			__iormb();
+
+			val &= ~(7 << g->intr_target_bit);
+			val |= g->intr_target_kpss_val << g->intr_target_bit;
+
+			__iowmb();
+			ret = qcom_scm_pinmux_write(addr, val);
+			if (ret)
+				pr_err("\n Routing interrupts to Apps proc failed");
+		}
+	}
 
 	/* Update configuration for gpio.
 	 * RAW_STATUS_EN is left on for all gpio irqs. Due to the
@@ -926,4 +949,3 @@ int msm_pinctrl_remove(struct platform_d
 	return 0;
 }
 EXPORT_SYMBOL(msm_pinctrl_remove);
-
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -46,4 +46,6 @@ extern void qcom_scm_cpu_power_down(u32
 
 extern u32 qcom_scm_get_version(void);
 
+extern s32 qcom_scm_pinmux_read(u32 arg1);
+extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2);
 #endif