KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ar71xx/mikrotik/config-default

78 lines
2 KiB
Text
Raw Normal View History

ar71xx: reorganize kernel configuration Rather than including all machines for the generic subtarget in the base configuration, leave the base configuration without specific machines and create a proper subtarget config for ar71xx/generic. The configuration diffs of the mikrotik and nand subtargets get significantly shorter, as will the configurations of future subtargets. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-12 05:19:29 +00:00
CONFIG_ATH79_DEV_AP9X_PCI=y
CONFIG_ATH79_DEV_ETH=y
CONFIG_ATH79_DEV_GPIO_BUTTONS=y
CONFIG_ATH79_DEV_LEDS_GPIO=y
CONFIG_ATH79_DEV_M25P80=y
CONFIG_ATH79_DEV_NFC=y
CONFIG_ATH79_DEV_SPI=y
CONFIG_ATH79_DEV_USB=y
CONFIG_ATH79_DEV_WMAC=y
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
CONFIG_ATH79_MACH_RB2011=y
CONFIG_ATH79_MACH_RB4XX=y
CONFIG_ATH79_MACH_RB750=y
ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boards It is only on RB911G-5HPnD and RB912UAG-5HPnD boards. The LEDs and the USB port is not working yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39102
2013-12-16 18:08:51 +00:00
CONFIG_ATH79_MACH_RB91X=y
ar71xx: add initial support for RB911G-5HPacD Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45299
2015-04-07 20:04:03 +00:00
CONFIG_ATH79_MACH_RB922=y
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
CONFIG_ATH79_MACH_RB95X=y
ar71xx: add support for RB mAP L-2nD This patch adds support for the MikroTik RouterBOARD mAP lite https://routerboard.com/RBmAPL-2nD Specifications: - SoC: Qualcomm QCA9533 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin QCA9533, 2x2:2 - Ethernet: 1x100M This is another 16M SPI NOR mikrotik device. The machine file is named mach-rbspi.c because I plan to add support for several of the other spi-based RouterBOARD devices in subsequent patches: they share most of the hardware and thus the same codebase. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-02-07 11:06:33 +00:00
CONFIG_ATH79_MACH_RBSPI=y
ar71xx: Add support for MikroTik RouterBOARD SXT Lite This patch adds support for the MikroTik RouterBOARD SXT Lite. The new RB911L series is also supported as a result. v2 of this patch fixes the wmac offset to match what is on the sticker. v3 refreshes the patch against r41148 and defines the power led as the status led in diag.sh v4 refreshes the patch against r41353 and fixes the patch path issue to make git am work correctly v5 selects the kernel config option in the mikrotik profile rather than in the main ar71xx config Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41450
2014-07-01 13:38:30 +00:00
CONFIG_ATH79_MACH_RBSXTLITE=y
ar71xx: reorganize kernel configuration Rather than including all machines for the generic subtarget in the base configuration, leave the base configuration without specific machines and create a proper subtarget config for ar71xx/generic. The configuration diffs of the mikrotik and nand subtargets get significantly shorter, as will the configurations of future subtargets. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-12 05:19:29 +00:00
CONFIG_ATH79_PCI_ATH9K_FIXUP=y
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
CONFIG_ATH79_ROUTERBOOT=y
ar71xx: reorganize kernel configuration Rather than including all machines for the generic subtarget in the base configuration, leave the base configuration without specific machines and create a proper subtarget config for ar71xx/generic. The configuration diffs of the mikrotik and nand subtargets get significantly shorter, as will the configurations of future subtargets. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-12 05:19:29 +00:00
CONFIG_BLK_MQ_PCI=y
ar71xx: convert mikrotik routerboard support to UBI Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-08 13:27:38 +00:00
CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
ar71xx/mikrotik: enable the GPIO latch driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39698
2014-02-22 18:05:31 +00:00
CONFIG_GPIO_LATCH=y
ar71xx: reorganize kernel configuration Rather than including all machines for the generic subtarget in the base configuration, leave the base configuration without specific machines and create a proper subtarget config for ar71xx/generic. The configuration diffs of the mikrotik and nand subtargets get significantly shorter, as will the configurations of future subtargets. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-12 05:19:29 +00:00
CONFIG_HW_HAS_PCI=y
ar71xx: Add kernel 4.9 support This add support for kernel 4.9 to the ar71xx target. It was compile tested with the generic, NAND and mikrotik subtarget. Multiple members of the community tested it on their boards and did not report any major problem so far. Especially the NAND part received some changes to adapt to the new kernel APIs. The serial driver hack used for the Arduino Yun was not ported because the kernel changed there a lot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-03 16:02:59 +00:00
# CONFIG_INTEL_XWAY_PHY is not set
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
CONFIG_LEDS_RB750=y
ar71xx: routerboot: add support for extended radio data On newer Mikrotik boards, the radio calibration data is stored differently and uses LZO compression instead of RLE. Update the RouterBOOT helper code to support the new format. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45297
2015-04-07 20:03:35 +00:00
CONFIG_LZO_DECOMPRESS=y
ar71xx/mikrotik: disable unused ethernet switch and phy drivers Disable the drivers for the following ethernet switches: Realtek RTL8306 Realtek RTL8366/8367 Marvell 88E6060 (DSA) Marvell 88E6063 (DSA) Also disable the phy driver for Marvell PHYs. None of the supported RouterBOARDs are using any device which needs these drivers. Disable the DSA framework too, because it is not required by the remaining switch drivers. This reduces the compressed kernel size by ~20KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
2018-01-09 07:18:14 +00:00
# CONFIG_MARVELL_PHY is not set
ar71xx/mikrotik: disable unused MTD options Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39080
2013-12-16 07:39:22 +00:00
# CONFIG_MTD_CFI is not set
CONFIG_MTD_CFI_I2=y
ar71xx/mikrotik: disable unused MTD partitioning and split drivers Reduces the compressed kernel size by ~2.5KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
2018-01-09 07:18:15 +00:00
# CONFIG_MTD_CMDLINE_PARTS is not set
ar71xx: convert mikrotik routerboard support to UBI Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-08 13:27:38 +00:00
# CONFIG_MTD_CYBERTAN_PARTS is not set
ar71xx/mikrotik: disable unused MTD options Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39080
2013-12-16 07:39:22 +00:00
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MYLOADER_PARTS is not set
ar71xx: add a new subtarget for nand based devices - saves around 44k on the lzma compressed generic kernel image SVN-Revision: 21396
2010-05-07 16:20:32 +00:00
CONFIG_MTD_NAND=y
ar71xx: register the NAND controller device on the RB2011 SVN-Revision: 33388
2012-09-13 07:26:26 +00:00
CONFIG_MTD_NAND_AR934X=y
ar71xx: sync kernel configs SVN-Revision: 31026
2012-03-19 15:57:06 +00:00
CONFIG_MTD_NAND_ECC=y
ar71xx: add a new subtarget for nand based devices - saves around 44k on the lzma compressed generic kernel image SVN-Revision: 21396
2010-05-07 16:20:32 +00:00
CONFIG_MTD_NAND_RB4XX=y
CONFIG_MTD_NAND_RB750=y
ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boards It is only on RB911G-5HPnD and RB912UAG-5HPnD boards. The LEDs and the USB port is not working yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39102
2013-12-16 18:08:51 +00:00
CONFIG_MTD_NAND_RB91X=y
ar71xx/mikrotik: disable unused MTD options Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39080
2013-12-16 07:39:22 +00:00
# CONFIG_MTD_REDBOOT_PARTS is not set
ar71xx: re-enable 4k sectors for the mikrotik subtargets On RB91x (and possibly others), there is a small SPI flash to store boot loader and configuration. It needs 4K sectors to be able to write the configuration using rbcfg Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-10-24 10:33:46 +00:00
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
ar71xx: add AVM FRITZ!WLAN Repeater 300E support Specifications: * SoC: AR7242 (Virian 400MHz) * RAM: 64 MB DDR (W9751G6JB-25) * Flash: 16MB SPI flash (S25FL129PIF) * WiFi: AR9382 (2.4/5GHz) + 2x SE2595L * LAN: 1x1000M (PEF7071V) To install LEDE via EVA bootloader, a FTP connection need to be established to 192.168.178.1 within the first seconds after power on: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1 Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-30 10:53:21 +00:00
# CONFIG_MTD_SPLIT_EVA_FW is not set
ar71xx/mikrotik: disable unused MTD partitioning and split drivers Reduces the compressed kernel size by ~2.5KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
2018-01-09 07:18:15 +00:00
# CONFIG_MTD_SPLIT_LZMA_FW is not set
# CONFIG_MTD_SPLIT_SEAMA_FW is not set
ar71xx: generic: enable CONFIG_MTD_SPLIT_TPLINK_FW We can use "tplink-fw" mtd splitter for TP-Link devices which use kernel with TP-Link header embedded inside "safeloader" image type and thus get rid of statically defined "kernel" and "rootfs" partitions in cmdline. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-07-03 16:57:36 +00:00
# CONFIG_MTD_SPLIT_TPLINK_FW is not set
ar71xx/mikrotik: disable unused MTD partitioning and split drivers Reduces the compressed kernel size by ~2.5KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
2018-01-09 07:18:15 +00:00
# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
# CONFIG_MTD_SPLIT_WRGG_FW is not set
ar71xx/mikrotik: disable unused MTD options Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39080
2013-12-16 07:39:22 +00:00
# CONFIG_MTD_TPLINK_PARTS is not set
ar71xx: convert mikrotik routerboard support to UBI Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-08 13:27:38 +00:00
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
ar71xx/mikrotik: disable unused ethernet switch and phy drivers Disable the drivers for the following ethernet switches: Realtek RTL8306 Realtek RTL8366/8367 Marvell 88E6060 (DSA) Marvell 88E6063 (DSA) Also disable the phy driver for Marvell PHYs. None of the supported RouterBOARDs are using any device which needs these drivers. Disable the DSA framework too, because it is not required by the remaining switch drivers. This reduces the compressed kernel size by ~20KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
2018-01-09 07:18:14 +00:00
# CONFIG_NET_DSA is not set
ar71xx: reorganize kernel configuration Rather than including all machines for the generic subtarget in the base configuration, leave the base configuration without specific machines and create a proper subtarget config for ar71xx/generic. The configuration diffs of the mikrotik and nand subtargets get significantly shorter, as will the configurations of future subtargets. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-12 05:19:29 +00:00
CONFIG_PCI=y
CONFIG_PCI_AR724X=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
CONFIG_RLE_DECOMPRESS=y
ar71xx/mikrotik: disable unused ethernet switch and phy drivers Disable the drivers for the following ethernet switches: Realtek RTL8306 Realtek RTL8366/8367 Marvell 88E6060 (DSA) Marvell 88E6063 (DSA) Also disable the phy driver for Marvell PHYs. None of the supported RouterBOARDs are using any device which needs these drivers. Disable the DSA framework too, because it is not required by the remaining switch drivers. This reduces the compressed kernel size by ~20KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
2018-01-09 07:18:14 +00:00
# CONFIG_RTL8306_PHY is not set
# CONFIG_RTL8366_SMI is not set
ar71xx: reorganize kernel configuration Rather than including all machines for the generic subtarget in the base configuration, leave the base configuration without specific machines and create a proper subtarget config for ar71xx/generic. The configuration diffs of the mikrotik and nand subtargets get significantly shorter, as will the configurations of future subtargets. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-12 05:19:29 +00:00
CONFIG_SOC_AR71XX=y
CONFIG_SOC_AR724X=y
CONFIG_SOC_AR934X=y
CONFIG_SOC_QCA953X=y
CONFIG_SOC_QCA955X=y
ar71xx: rewrite SPI drivers for the RB4xx boards * add a new SPI controller driver * add SPI driver for the CPLD chip * convert the NAND driver * enable the mikroSD slot * enable more LEDs SVN-Revision: 22863
2010-08-31 20:13:47 +00:00
CONFIG_SPI_RB4XX=y
CONFIG_SPI_RB4XX_CPLD=y
ar71xx: convert mikrotik routerboard support to UBI Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-08 13:27:38 +00:00
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
# CONFIG_UBIFS_FS_LZO is not set
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
Reference in a new issue Copy permalink