openwrtv4/target/linux/brcm2708/patches-4.1/0098-BCM270X_DT-Add-overlay-to-enable-uart1.patch

From 00a68898d386e94e95cadca325b152b2094909d7 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Fri, 26 Jun 2015 08:50:11 +0100
Subject: [PATCH 098/148] BCM270X_DT: Add overlay to enable uart1

N.B. The UART1 clock is derived from the core clock. The firmware
will update clock-frequency if core_freq is set, but be aware
that unless force_turbo=1 while overclocking then the baud rate
will vary with ARM activity.
---
 arch/arm/boot/dts/bcm2708-rpi-b-plus.dts     |  1 +
 arch/arm/boot/dts/bcm2708-rpi-b.dts          |  1 +
 arch/arm/boot/dts/bcm2708-rpi-cm.dts         |  1 +
 arch/arm/boot/dts/bcm2709-rpi-2-b.dts        |  1 +
 arch/arm/boot/dts/overlays/Makefile          |  1 +
 arch/arm/boot/dts/overlays/README            |  8 ++++++
 arch/arm/boot/dts/overlays/uart1-overlay.dts | 38 ++++++++++++++++++++++++++++
 arch/arm/configs/bcm2709_defconfig           |  2 +-
 arch/arm/configs/bcmrpi_defconfig            |  2 +-
 9 files changed, 53 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/overlays/uart1-overlay.dts

--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
@@ -103,6 +103,7 @@
 	__overrides__ {
 		uart0 = <&uart0>,"status";
 		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
+		uart1_clkrate = <&uart1>,"clock-frequency:0";
 		i2s = <&i2s>,"status";
 		spi = <&spi0>,"status";
 		i2c0 = <&i2c0>,"status";
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -97,6 +97,7 @@
 	__overrides__ {
 		uart0 = <&uart0>,"status";
 		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
+		uart1_clkrate = <&uart1>,"clock-frequency:0";
 		i2s = <&i2s>,"status";
 		spi = <&spi0>,"status";
 		i2c0 = <&i2c0>,"status";
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
@@ -79,6 +79,7 @@
 	__overrides__ {
 		uart0 = <&uart0>,"status";
 		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
+		uart1_clkrate = <&uart1>,"clock-frequency:0";
 		i2s = <&i2s>,"status";
 		spi = <&spi0>,"status";
 		i2c0 = <&i2c0>,"status";
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
@@ -103,6 +103,7 @@
 	__overrides__ {
 		uart0 = <&uart0>,"status";
 		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
+		uart1_clkrate = <&uart1>,"clock-frequency:0";
 		i2s = <&i2s>,"status";
 		spi = <&spi0>,"status";
 		i2c0 = <&i2c0>,"status";
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -42,6 +42,7 @@ dtb-$(RPI_DT_OVERLAYS) += sdhost-overlay
 dtb-$(RPI_DT_OVERLAYS) += spi-bcm2708-overlay.dtb
 dtb-$(RPI_DT_OVERLAYS) += spi-bcm2835-overlay.dtb
 dtb-$(RPI_DT_OVERLAYS) += tinylcd35-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += uart1-overlay.dtb
 dtb-$(RPI_DT_OVERLAYS) += w1-gpio-overlay.dtb
 dtb-$(RPI_DT_OVERLAYS) += w1-gpio-pullup-overlay.dtb
 
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -489,6 +489,14 @@ Params: speed                    Display
                 dtoverlay=tinylcd35,touch,touchgpio=3
 
 
+Name:   uart1
+Info:   Enable uart1 in place of uart0
+Load:   dtoverlay=uart1,<param>=<val>
+Params: txd1_pin                 GPIO pin for TXD1 (14, 32 or 40 - default 14)
+
+        rxd1_pin                 GPIO pin for RXD1 (15, 33 or 41 - default 15)
+
+
 Name:   w1-gpio
 Info:   Configures the w1-gpio Onewire interface module.
         Use this overlay if you *don't* need a GPIO to drive an external pullup.
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/uart1-overlay.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+/plugin/;
+
+/{
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target = <&uart1>;
+		__overlay__ {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&gpio>;
+		__overlay__ {
+			uart1_pins: uart1_pins {
+				brcm,pins = <14 15>;
+				brcm,function = <2>; /* alt5 */
+				brcm,pull = <0 2>;
+			};
+		};
+	};
+
+	fragment@2 {
+		target-path = "/chosen";
+		__overlay__ {
+			bootargs = "8250.nr_uarts=1";
+		};
+	};
+
+	__overrides__ {
+		txd1_pin = <&uart1_pins>,"brcm,pins:0";
+		rxd1_pin = <&uart1_pins>,"brcm,pins:4";
+	};
+};
--- a/arch/arm/configs/bcm2709_defconfig
+++ b/arch/arm/configs/bcm2709_defconfig
@@ -562,7 +562,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=0
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
--- a/arch/arm/configs/bcmrpi_defconfig
+++ b/arch/arm/configs/bcmrpi_defconfig
@@ -555,7 +555,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=0
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y