KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/brcm63xx/image/Makefile

389 lines
15 KiB
Makefile
Raw Normal View History

brcm63xx: simplify HCS image creation $(KDIR)/vmlinux is already a binary image, there is no need to create another one. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36949
2013-06-17 19:32:56 +00:00
#
Generate images for RTA1320_16M-based routers SVN-Revision: 26681
2011-04-15 14:31:36 +00:00
# Copyright (C) 2006-2011 OpenWrt.org
credit where credit is due SVN-Revision: 4091
2006-06-27 00:35:46 +00:00
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) SVN-Revision: 4084
2006-06-26 11:45:23 +00:00
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
bcm963xx: fix load address / kernel entry Current kernels have the same kernel entry as load address, so just set them like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this too. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11169
2008-05-18 17:29:39 +00:00
LOADADDR = 0x80010000 # RAM start + 16M
KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) SVN-Revision: 4084
2006-06-26 11:45:23 +00:00
RAMSIZE = 0x01000000 # 64MB
LOADER_MAKEOPTS= \
KDIR=$(KDIR) \
LOADADDR=$(LOADADDR) \
KERNEL_ENTRY=$(KERNEL_ENTRY) \
RAMSIZE=$(RAMSIZE)
Major cleanup : - no more Broadcom kerSys* code - working runtime boot loader detection - updated flash map driver SVN-Revision: 6896
2007-04-08 17:20:01 +00:00
define trxalign/jffs2-128k
-a 0x20000
endef
define trxalign/jffs2-64k
-a 0x10000
endef
define trxalign/squashfs
-a 1024
endef
image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. SVN-Revision: 24118
2010-11-23 20:17:08 +00:00
define Image/LimitName16
image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. SVN-Revision: 24191
2010-11-28 22:13:00 +00:00
$(shell expr substr "$(1)" 1 16)
image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. SVN-Revision: 24118
2010-11-23 20:17:08 +00:00
endef
brcm63xx: add support for attaching dtbs to lzma kernels In preparation for switching to dtb based board identification, add support for building lzma-loader and lzma cfe kernels with dtb appended. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42121
2014-08-11 11:36:55 +00:00
TARGET_DTBS:=
brcm63xx: add helpers for building cfe images with dtb Add a helper for building images with dtb appended kernels. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42122
2014-08-11 11:36:59 +00:00
TARGET_IMAGES:=
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
TARGET_Default_DTBS:=
TARGET_Default_IMAGES:=
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11171
2008-05-18 17:30:04 +00:00
define Image/Build/CFE
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
--output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
--boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
--load-addr $(LOADADDR) --rsa-signature "$(5)" \
bcm63xx: Add board id override fixup. Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24189
2010-11-28 22:04:40 +00:00
--info1 "-$(call Image/LimitName16,$(4))" --info2 $(1) \
$(6) $(7) $(8) $(9)
endef
brcm63xx: add helpers for building cfe images with dtb Add a helper for building images with dtb appended kernels. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42122
2014-08-11 11:36:59 +00:00
define Image/Build/CFEDTB
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-$(2).lzma.cfe -f $(KDIR)/root.$(1) \
--output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
--boardid $(3) --chipid $(4) --entry $(KERNEL_ENTRY) \
--load-addr $(LOADADDR) --rsa-signature "$(6)" \
--info1 "-$(call Image/LimitName16,$(5))" --info2 $(1) \
$(7) $(8) $(9) $(10)
endef
add support for HW553 bcm6358-based boards (#8844) SVN-Revision: 25590
2011-02-19 15:44:06 +00:00
define Image/Build/CFEHW553
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
--output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
--boardid $(2) --chipid $(3) --entry $(LOADADDR) \
--load-addr $(LOADADDR) --tag-version 7 \
--block-size 0x20000 --image-offset $(4)
endef
add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366 SVN-Revision: 14850
2009-03-12 08:54:04 +00:00
define Image/Build/CFEAGPF
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
--output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
--boardid $(2) --chipid $(3) --entry $(LOADADDR) \
--load-addr $(LOADADDR) --tag-version 8 \
--signature2 IMAGE --block-size 0x20000 \
bcm63xx: Add board id override fixup. Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24189
2010-11-28 22:04:40 +00:00
--image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366 SVN-Revision: 14850
2009-03-12 08:54:04 +00:00
endef
build images for RG100A (bcm6358-based boards) (#6755) SVN-Revision: 19894
2010-02-28 11:09:39 +00:00
define Image/Build/RG100A
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
--output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
--boardid $(2) --chipid $(3) --entry $(LOADADDR) \
--load-addr $(LOADADDR) --block-size 0x20000 \
bcm63xx: Add board id override fixup. Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24189
2010-11-28 22:04:40 +00:00
--image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
build images for RG100A (bcm6358-based boards) (#6755) SVN-Revision: 19894
2010-02-28 11:09:39 +00:00
endef
Build images for Inventel Livebox SVN-Revision: 13616
2008-12-12 15:16:57 +00:00
define Image/Build/RedBoot
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
$(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
endef
bcm63xx: Add support for the T-Home Speedport W 303V Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
define Image/Build/SPW303V
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
--output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
--boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
--load-addr $(LOADADDR) --rsa-signature "$(5)" \
bcm63xx: pad Speedport W303 V images to 4 MiB Prevents CFE from flashing to the second image offset. Fix up the rootfs length on first boot else CFE will complain. SVN-Revision: 31876
2012-05-27 13:22:22 +00:00
--pad 4 $(6) $(7) $(8) $(9)
bcm63xx: Add support for the T-Home Speedport W 303V Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
# Fix up header
$(STAGING_DIR_HOST)/bin/spw303v -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
-o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin
$(STAGING_DIR_HOST)/bin/xorimage -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin \
-o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-factory.bin
rm -f $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp
endef
brcm63xx: Add support for ZyXEL P870HW-51a v2 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41850
2014-07-27 17:44:53 +00:00
define Image/Build/ZyXEL
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
--output $(BIN_DIR)/openwrt-$(5)-$(1).tmp \
--boardid $(2) --chipid $(4) --entry $(KERNEL_ENTRY) \
--load-addr $(LOADADDR) --rsa-signature "$(6)" \
--info1 "+$(call Image/LimitName16,$(3))" --info2 $(1) \
$(7) $(8) $(9) $(10)
# Fix up header
$(STAGING_DIR_HOST)/bin/zyxbcm -i $(BIN_DIR)/openwrt-$(5)-$(1).tmp \
-o $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin
rm -f $(BIN_DIR)/openwrt-$(5)-$(1).tmp
endef
generate images for old CFE based boards like the Davolink DV201 SVN-Revision: 14264
2009-01-29 14:56:45 +00:00
define Image/Build/CFEOLD
$(TOPDIR)/scripts/brcmImage.pl -t -p \
-b $(2) -c $(3) \
-k $(KDIR)/vmlinux.lzma.cfe \
-r $(KDIR)/root.$(1) \
-o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
endef
brcm63xx: add kernel space and image support for the Netgear CVG834G Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36876
2013-06-06 22:22:14 +00:00
define Image/Build/HCS
$(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_byte=$(3) \
--rev_maj=$(4) --rev_min=$(5) --input_file=$(6) \
--output_file=$(BIN_DIR)/openwrt-$(2)-$(1).bin
endef
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) SVN-Revision: 4084
2006-06-26 11:45:23 +00:00
define Build/Clean
Major cleanup : - no more Broadcom kerSys* code - working runtime boot loader detection - updated flash map driver SVN-Revision: 6896
2007-04-08 17:20:01 +00:00
$(MAKE) -C lzma-loader clean
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) SVN-Revision: 4084
2006-06-26 11:45:23 +00:00
endef
brcm63xx: add working lzma-loader and use it for initramfs Add a working lzma loader and use it for generating initramfs kernels to allow easily netbooting elf kernels on devices with a 4 MiB CFE size limit. Based on ar71xx's lzma-loader. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41940
2014-08-01 21:56:31 +00:00
define Image/PrepareLoader
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11171
2008-05-18 17:30:04 +00:00
# Standard LZMA kernel
brcm63xx: add working lzma-loader and use it for initramfs Add a working lzma loader and use it for generating initramfs kernels to allow easily netbooting elf kernels on devices with a 4 MiB CFE size limit. Based on ar71xx's lzma-loader. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41940
2014-08-01 21:56:31 +00:00
$(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux$(1) $(KDIR)/vmlinux$(1).lzma
# Build the LZMA loader
rm -rf $(KDIR)/lzma-loader
$(MAKE) -C lzma-loader \
$(LOADER_MAKEOPTS) \
BUILD_DIR="$(KDIR)" \
TARGET_DIR="$(BIN_DIR)" \
LOADER_DATA="$(KDIR)/vmlinux$(1).lzma" \
LOADER=$(IMG_PREFIX)-loader$(1).elf \
LZMA_TEXT_START=0x80a00000 \
compile loader.elf
rm -f $(KDIR)/vmlinux$(1).lzma
endef
brcm63xx: add support for attaching dtbs to lzma kernels In preparation for switching to dtb based board identification, add support for building lzma-loader and lzma cfe kernels with dtb appended. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42121
2014-08-11 11:36:55 +00:00
define Image/PrepareLoaderDTB
# append dtb to vmlinux, then build a standard LZMA loader
cat $(KDIR)/vmlinux$(1) $(DTS_DIR)/$(2).dtb > $(KDIR)/vmlinux$(1)-$(2)
$(call Image/PrepareLoader,$(1)-$(2))
endef
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11171
2008-05-18 17:30:04 +00:00
brcm63xx: add support for attaching dtbs to lzma kernels In preparation for switching to dtb based board identification, add support for building lzma-loader and lzma cfe kernels with dtb appended. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42121
2014-08-11 11:36:55 +00:00
define Image/PrepareCFELzmaKernel
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11171
2008-05-18 17:30:04 +00:00
# CFE is a LZMA nazi! It took me hours to find out the parameters!
# Also I think lzma has a bug cause it generates different output depending on
# if you use stdin / stdout or not. Use files instead of stdio here, cause
# otherwise CFE will complain and not boot the image.
brcm63xx: add support for attaching dtbs to lzma kernels In preparation for switching to dtb based board identification, add support for building lzma-loader and lzma cfe kernels with dtb appended. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42121
2014-08-11 11:36:55 +00:00
$(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux$(1) $(KDIR)/vmlinux$(1).lzma.tmp
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11171
2008-05-18 17:30:04 +00:00
# Strip out the length, CFE doesn't like this
brcm63xx: add support for attaching dtbs to lzma kernels In preparation for switching to dtb based board identification, add support for building lzma-loader and lzma cfe kernels with dtb appended. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42121
2014-08-11 11:36:55 +00:00
dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe bs=5 count=1
dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
rm -f $(KDIR)/vmlinux$(1).lzma.tmp
endef
define Image/PrepareCFELzmaKernelDTB
# compile the dts (the dtb will be later reused for the lzma loader)
$(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(DTS_DIR)/$(1).dtb ../dts/$(1).dts
cat $(KDIR)/vmlinux $(DTS_DIR)/$(1).dtb > $(KDIR)/vmlinux-$(1)
$(call Image/PrepareCFELzmaKernel,-$(1))
endef
define Image/Prepare
$(call Image/PrepareCFELzmaKernel,)
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(foreach board,$(sort $(TARGET_$(PROFILE)_DTBS)), $(call Image/PrepareCFELzmaKernelDTB,$(board)))
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> SVN-Revision: 11171
2008-05-18 17:30:04 +00:00
brcm63xx: add working lzma-loader and use it for initramfs Add a working lzma loader and use it for generating initramfs kernels to allow easily netbooting elf kernels on devices with a 4 MiB CFE size limit. Based on ar71xx's lzma-loader. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41940
2014-08-01 21:56:31 +00:00
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
$(call Image/PrepareLoader,-initramfs)
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(foreach board,$(sort $(TARGET_$(PROFILE)_DTBS)), $(call Image/PrepareLoaderDTB,-initramfs,$(board)))
brcm63xx: add working lzma-loader and use it for initramfs Add a working lzma loader and use it for generating initramfs kernels to allow easily netbooting elf kernels on devices with a 4 MiB CFE size limit. Based on ar71xx's lzma-loader. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41940
2014-08-01 21:56:31 +00:00
endif
brcm63xx image generation cleanups (#3169) SVN-Revision: 10703
2008-04-01 21:10:47 +00:00
rm -f $(KDIR)/fs_mark
touch $(KDIR)/fs_mark
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) SVN-Revision: 4084
2006-06-26 11:45:23 +00:00
endef
brcm63xx: create initramfs HCS images Cable Modem devices cannot load an ELF file directly so we need to provide them with a HCS image even when targetting initramfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36954
2013-06-17 22:57:04 +00:00
define Image/Build/Initramfs
# Netgear CVG834G
targets: prepare for supporting normal and initramfs images In order to support both normal images and initramfs, ensure that each target sets KERNELNAME properly so that the generic kernel building code can copy the corresponding files over $(KDIR) with the appropriate extension. Update the various paths to the kernel and wrapper images from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
$(call Image/Build/HCS,initramfs,cvg834g,a020,0001,0022,$(KDIR)/vmlinux-initramfs)
brcm63xx: create initramfs HCS images Cable Modem devices cannot load an ELF file directly so we need to provide them with a HCS image even when targetting initramfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36954
2013-06-17 22:57:04 +00:00
endef
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
# $(1) = Profile
# $(2) = dtb
# $(3) = boardname
# $(4) = chipid
# $(5) = imagename
# $(6) = rsa signature
# $(7) = additional options
brcm63xx: add helpers for building cfe images with dtb Add a helper for building images with dtb appended kernels. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42122
2014-08-11 11:36:59 +00:00
define CfeImageDTB
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
define Image/Build/$(5)
$$(call Image/Build/CFEDTB,$$(1),$(2),$(3),$(4),$(5),$(6),$(7))
brcm63xx: add helpers for building cfe images with dtb Add a helper for building images with dtb appended kernels. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42122
2014-08-11 11:36:59 +00:00
endef
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
TARGET_Default_DTBS += $(2)
TARGET_Default_IMAGES += $(5)
TARGET_$(1)_DTBS += $(2)
TARGET_$(1)_IMAGES += $(5)
brcm63xx: add helpers for building cfe images with dtb Add a helper for building images with dtb appended kernels. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42122
2014-08-11 11:36:59 +00:00
endef
brcm63xx: use dtb board detection for HW556 This requires individual images for each board version for now. Linux partition was shrunk to ensure writing thewrong image won't erase wifi calibration data. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42126
2014-08-11 11:37:14 +00:00
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) SVN-Revision: 4084
2006-06-26 11:45:23 +00:00
define Image/Build
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files SVN-Revision: 20834
2010-04-12 23:15:56 +00:00
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). SVN-Revision: 16393
2009-06-09 08:04:52 +00:00
# Various routers
bcm63xx: fix 963281TAN image names it's a 6328, not a 6348. SVN-Revision: 33665
2012-10-08 13:08:40 +00:00
$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-4M-flash-generic,,--pad 2)
$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-8M-flash-generic,,--pad 4)
$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-16M-flash-generic,,--pad 8)
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
$(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. SVN-Revision: 24118
2010-11-23 20:17:08 +00:00
$(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION))
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,)
build 96348R images SVN-Revision: 29960
2012-01-30 21:12:32 +00:00
$(call Image/Build/CFE,$(1),96348R,6348,96348R-generic,,)
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
$(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,--layoutver 5)
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
$(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-generic SVN-Revision: 30822
2012-03-05 14:49:34 +00:00
$(call Image/Build/CFE,$(1),96348GW-11,6348,96348GW-11-generic)
$(call Image/Build/CFE,$(1),96348GW-10,6348,96348GW-10-generic)
generate generic images for BCM96358VW and BCM96358VW2 (#10666) SVN-Revision: 30821
2012-03-05 14:49:31 +00:00
$(call Image/Build/CFE,$(1),96358VW,6358,96358VW-generic)
$(call Image/Build/CFE,$(1),96358VW2,6358,96358VW2-generic)
bcm63xx: drop linux 3.2 support SVN-Revision: 31464
2012-04-24 11:49:27 +00:00
$(call Image/Build/CFE,$(1),96368MVNgr,6368,96368MVNgr-generic)
$(call Image/Build/CFE,$(1),96368MVWG,6368,96368MVWG-generic)
bcm63xx: enable bcm6368 for linux 3.3 and build images Only build bcm6368 images when building for linux 3.3. SVN-Revision: 31133
2012-03-28 20:42:37 +00:00
brcm63xx: Add support for ADB P.DG A4001N Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41852
2014-07-27 17:44:59 +00:00
# ADB P.DG A4001N
$(call Image/Build/CFE,$(1),96328dg2x2,6328,A4001N,,--pad 4)
brcm63xx: Use model name for ADB P.DG A4001N1 This patch also makes use of the new leds script. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41585
2014-07-12 12:31:30 +00:00
# ADB P.DG A4001N1
$(call Image/Build/CFE,$(1),963281T_TEF,6328,A4001N1,,--pad 8)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
# BT Voyager V210_BTR
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
$(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
# BT Voyager V210_ROI, V210_WB
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
$(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
# BT Voyager V2091_BTR
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
$(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
# BT Voyager V2091_ROI, V2091_WB
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
$(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
# BT Voyager V220V, V220V_MGCP_BTR
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
$(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
# BT Voyager V2110, V2110_AA, V2110_ROI
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
$(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
# BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
$(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,--layoutver 5)
generate images for RTA1025W_16-based routers (#5594) SVN-Revision: 17058
2009-07-31 10:47:00 +00:00
# RTA1025W_16 (numerous routers)
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
$(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,--layoutver 5)
Generate images for RTA1320_16M-based routers SVN-Revision: 26681
2011-04-15 14:31:36 +00:00
# RTA1320_16M (numerous routers)
$(call Image/Build/CFE,$(1),RTA1320_16M,6338,RTA1320_16M,,--layoutver 5)
brcm63xx: Add support for ZyXEL P870HW-51a v2 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41850
2014-07-27 17:44:53 +00:00
# Zyxel P870HW-51a v2
$(call Image/Build/ZyXEL,$(1),96368VVW,P870HW-51a_v2,6368,P870HW-51a_v2,ZyXEL,--signature "ZyXEL_0001")
bcm63xx: split into two subtargets, generic and SMP Make SMP a subtarget, since it only supports BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36527
2013-05-02 15:28:31 +00:00
brcm63xx: F@ST2504n board support (image, base-files) Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4730/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39676
2014-02-22 11:16:42 +00:00
# Sagem F@ST2504n
$(call Image/Build/CFE,$(1),F@ST2504n,6362,F@ST2504n,OpenWRT-$(REVISION))
brcm63xx: Add support for Comtrend VR-3025u Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41847
2014-07-27 17:44:45 +00:00
# Comtrend VR-3025u
$(call Image/Build/CFE,$(1),96368M-1541N,6368,VR-3025u,,--pad 16)
brcm63xx: Add support for Comtrend VR-3025un Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41848
2014-07-27 17:44:48 +00:00
# Comtrend VR-3025un
$(call Image/Build/CFE,$(1),96368M-1341N,6368,VR-3025un,,--pad 4)
brcm63xx: Add support for Comtrend WAP-5813n This adds support for Comtrend WAP-5813n. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: refresh patches] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41421
2014-06-30 13:34:34 +00:00
# Comtrend WAP-5813n
$(call Image/Build/CFE,$(1),96369R-1231N,6368,WAP-5813n,,--pad 4)
generate images for old CFE based boards like the Davolink DV201 SVN-Revision: 14264
2009-01-29 14:56:45 +00:00
# Davolink DV201AMR
$(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
add support for user9102 boards (#4537) SVN-Revision: 14305
2009-01-31 16:01:20 +00:00
# USR 9108
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
# NetGear DG834GT, DG834PN
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
# Belkin f5d7633
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
add support for DSL-2640B rev B2 Signed-off-by: Adrian Feliks <mexit@o2.pl> SVN-Revision: 26958
2011-05-20 10:06:22 +00:00
# D-Link DSL-2640B, rev B2
$(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B-B2)
build images for D-Link DSL-2650U (#9003) SVN-Revision: 29238
2011-11-18 10:37:03 +00:00
# D-Link DSL-2650U
fix D-Link DSL-2650U image generation SVN-Revision: 29266
2011-11-19 21:34:51 +00:00
$(call Image/Build/CFE,$(1),96358VW2,6358,DSL2650U)
bcm63xx: build images for DSL-274XB revision F1 Build images for D-Link DSL-274XB revision F1. Flashing through original web UI as well as CFE works. Known issues: * wifi led inverted (on when wifi is off and vice cersa) * same issues as generic bcm6328 support SVN-Revision: 31885
2012-05-27 13:22:51 +00:00
# D-Link DSL-2740B/DSL-2741B, rev F1
$(call Image/Build/CFE,$(1),AW4339U,6328,DSL274XB-F1-EU,,--signature2="4.06.01.EUF1" --pad 4)
$(call Image/Build/CFE,$(1),AW4339U,6328,DSL274XB-F1-AU,,--signature2="4.06.01.AUF1" --pad 4)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
# TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
# TP-Link 8900GB
$(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02'))
generate experimental images for bcm6338 boards, thanks to Daniel Dickinson SVN-Revision: 16490
2009-06-17 13:16:59 +00:00
Add support for Sagem F@ST2404 (#4332) SVN-Revision: 13583
2008-12-10 16:13:41 +00:00
# Sagem F@ST2404
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
$(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
Add F@ST2604 board support. Add Sagem F@ST2604 board support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 33886
2012-10-21 14:35:06 +00:00
# Sagem F@ST2604
$(call Image/Build/CFE,$(1),F@ST2604,6348,F@ST2604-cfe)
$(call Image/Build/CFE,$(1),F@ST2604,6348,F@ST2604,OpenWRT-$(REVISION))
brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL router This adds profile and build image for Sagemcom F@st2704, using b43 driver. For WiFi to work properly BCMA fallback SPROM support patch must be applied (http://git.io/z1Ki8A). Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4212/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39673
2014-02-22 11:16:35 +00:00
# Sagem F@ST2704V2
$(call Image/Build/CFE,$(1),F@ST2704V2,6328,F@ST2704V2-cfe)
$(call Image/Build/CFE,$(1),F@ST2704V2,6328,F@ST2704V2,OpenWRT-$(REVISION))
Build images for Inventel Livebox SVN-Revision: 13616
2008-12-12 15:16:57 +00:00
# Inventel Livebox
$(call Image/Build/RedBoot,livebox)
add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366 SVN-Revision: 14850
2009-03-12 08:54:04 +00:00
# Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe)
$(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W)
add support for the Pirelli AG226G board (#5337) SVN-Revision: 17190
2009-08-09 10:19:47 +00:00
# Pirelli A226G
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe)
$(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G)
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
build images for Pirelli A226M (#10409) SVN-Revision: 29045
2011-11-13 19:19:22 +00:00
# Pirelli A226M
$(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M-cfe)
$(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M)
build images for RG100A (bcm6358-based boards) (#6755) SVN-Revision: 19894
2010-02-28 11:09:39 +00:00
# RG100A,DB120 etc.
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
$(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
build images for RG100A (bcm6358-based boards) (#6755) SVN-Revision: 19894
2010-02-28 11:09:39 +00:00
Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known). SVN-Revision: 24040
2010-11-19 13:41:54 +00:00
# Telsey CPVA642-type (e.g. CPA-ZNTE60T)
$(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0")
brcm63xx: Add support for Huawei HG520v Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41851
2014-07-27 17:44:56 +00:00
# Huawei HW520
$(call Image/Build/CFE,$(1),HW6358GW_B,6358,HW520,EchoLife_HG520v)
add support for HW553 bcm6358-based boards (#8844) SVN-Revision: 25590
2011-02-19 15:44:06 +00:00
#HW553
$(call Image/Build/CFEHW553,$(1),HW553,6358,0x20000,HW553)
bcm63xx: Add support for the T-Home Speedport W 303V Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
# T-Com Speedport W 303V Typ B
$(call Image/Build/SPW303V,$(1),96358-502V,6358,SPW303V)
brcm63xx: add kernel space and image support for the Netgear CVG834G Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36876
2013-06-06 22:22:14 +00:00
# Netgear CVG834G
brcm63xx: simplify HCS image creation $(KDIR)/vmlinux is already a binary image, there is no need to create another one. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36949
2013-06-17 19:32:56 +00:00
$(call Image/Build/HCS,$(1),cvg834g,a020,0001,0022,$(KDIR)/vmlinux)
bcm63xx: enable all SoCs for both subtargets Now that SMP kernels also work on older SoCs, also enable them for SMP. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37100
2013-06-30 13:10:03 +00:00
brcm63xx: add helpers for building cfe images with dtb Add a helper for building images with dtb appended kernels. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42122
2014-08-11 11:36:59 +00:00
# build dtb image list
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(foreach image,$(TARGET_$(PROFILE)_IMAGES),$(call Image/Build/$(image),$(1)))
brcm63xx: add helpers for building cfe images with dtb Add a helper for building images with dtb appended kernels. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42122
2014-08-11 11:36:59 +00:00
brcm63xx: create initramfs HCS images Cable Modem devices cannot load an ELF file directly so we need to provide them with a HCS image even when targetting initramfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36954
2013-06-17 22:57:04 +00:00
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
$(call Image/Build/Initramfs)
endif
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) SVN-Revision: 4084
2006-06-26 11:45:23 +00:00
endef
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
# Generic 96328avng
$(eval $(call CfeImageDTB,96328avng,bcm96328avng,96328avng,6328,96328avng-4M-flash-generic,,--pad 2))
$(eval $(call CfeImageDTB,96328avng,bcm96328avng,96328avng,6328,96328avng-8M-flash-generic,,--pad 4))
$(eval $(call CfeImageDTB,96328avng,bcm96328avng,96328avng,6328,96328avng-16M-flash-generic,,--pad 8))
brcm63xx: move bcm96328avng to dtb detection Use appended dtb for board detection for bcm96328avng. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42124
2014-08-11 11:37:04 +00:00
brcm63xx: replace CFEFIXUP usage with dtb based detection Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42125
2014-08-11 11:37:09 +00:00
# Asmax AR 1004g
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(eval $(call CfeImageDTB,AR1004G,ar1004g,96348GW-10,6348,AR1004G))
brcm63xx: Add DT support for AR-5381u Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42239
2014-08-21 11:28:18 +00:00
# Comtrend AR-5381u
$(eval $(call CfeImageDTB,AR5381u,ar-5381u,96328A-1241N,6328,AR-5381u,,--pad 8))
brcm63xx: Add DT support for AR-5387un Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42240
2014-08-21 11:28:28 +00:00
# Comtrend AR-5387un
$(eval $(call CfeImageDTB,AR5387un,ar-5387un,96328A-1441N1,6328,AR-5387un,,--pad 8))
brcm63xx: replace CFEFIXUP usage with dtb based detection Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42125
2014-08-11 11:37:09 +00:00
# Comtrend 536, 5621
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(eval $(call CfeImageDTB,CT536_CT5621,ct536plus,96348GW-11,6348,CT536_CT5621))
brcm63xx: Add DT support for CT-5365 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: make linux partition writable] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42237
2014-08-21 11:28:10 +00:00
# Comtrend CT-5365
$(eval $(call CfeImageDTB,CT5365,ct-5365,96348A-122,6348,CT-5365))
brcm63xx: Add DT support for CT-6373 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: make linux partition writable] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42238
2014-08-21 11:28:14 +00:00
# Comtrend CT-6373
$(eval $(call CfeImageDTB,CT6373,ct-6373,CT6373-1,6358,CT-6373))
brcm63xx: replace CFEFIXUP usage with dtb based detection Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42125
2014-08-11 11:37:09 +00:00
# D-Link DSL-2740B/DSL-2741B, rev C2
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(eval $(call CfeImageDTB,DSL274XB_C,dsl-274xb-c,96358GW,6358,DSL274XB-C2))
brcm63xx: replace CFEFIXUP usage with dtb based detection Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42125
2014-08-11 11:37:09 +00:00
# D-Link DSL-2740B/DSL-2741B, rev C3
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(eval $(call CfeImageDTB,DSL274XB_C,dsl-274xb-c,AW4139,6358,DSL274XB-C3))
brcm63xx: replace CFEFIXUP usage with dtb based detection Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42125
2014-08-11 11:37:09 +00:00
# D-Link DVA-G3810BN/TL
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(eval $(call CfeImageDTB,DVAG3810BN,dva-g3810bn_tl,96358VW,6358,DVAG3810BN))
brcm63xx: simplify HG556a image generation Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42207
2014-08-18 21:50:34 +00:00
# Huawei HG556a
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(eval $(call CfeImageDTB,HG556a_AB,hg556a-a,HW556,6358,HG556a_A,EchoLife_HG556a,--image-offset 0x20000 --block-size 0x10000 --tag-version 8))
$(eval $(call CfeImageDTB,HG556a_AB,hg556a-b,HW556,6358,HG556a_B,EchoLife_HG556a,--image-offset 0x20000 --block-size 0x20000 --tag-version 8))
$(eval $(call CfeImageDTB,HG556a_C,hg556a-c,HW556,6358,HG556a_C,EchoLife_HG556a,--image-offset 0x20000 --block-size 0x20000 --tag-version 8))
# T-Com Speedport W 500V
$(eval $(call CfeImageDTB,SPW500V,spw500v,96348GW,6348,SPW500V))
# Tecom GW6000
$(eval $(call CfeImageDTB,GW6000,gw6000,96348GW,6348,GW6000))
# Tecom GW6200
$(eval $(call CfeImageDTB,GW6200,gw6200,96348GW,6348,GW6200,$(shell printf '\x99')))
brcm63xx: use dtb board detection for neufbox 4 This splits up neufbox 4 for now into two images, one for each OEM. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42128
2014-08-11 11:37:21 +00:00
# SFR Neufbox 4
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(eval $(call CfeImageDTB,Neufbox4,nb4-ser-r0,96358VW,6358,NEUFBOX4-SER,OpenWRT-$(REVISION)))
$(eval $(call CfeImageDTB,Neufbox4,nb4-fxc-r1,96358VW,6358,NEUFBOX4-FXC,OpenWRT-$(REVISION)))
brcm63xx: use dtb board detection for NB6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42127
2014-08-11 11:37:17 +00:00
# SFR neufbox 6
brcm63xx: tag images/dtbs with profiles This prevents generating every supported image, except for de "Default" profile. Also fixes Neufbox 6 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
$(eval $(call CfeImageDTB,Neufbox6,nb6-ser-r0,NB6-SER-r0,6362,NEUFBOX6,OpenWRT-$(REVISION)))
brcm63xx: use dtb board detection for NB6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42127
2014-08-11 11:37:17 +00:00
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) SVN-Revision: 4084
2006-06-26 11:45:23 +00:00
$(eval $(call BuildImage))
Reference in a new issue Copy permalink