openwrtv4/target/linux/mvebu/patches-4.9/424-net-mvneta-add-flow-control-support-via-phylink.patch

From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 1 Oct 2015 17:41:44 +0100
Subject: [PATCH] net: mvneta: add flow control support via phylink

Add flow control support to mvneta, including the ethtool hooks.  This
uses the phylink code to calculate the result of autonegotiation where
a phy is attached, and to handle the ethtool settings.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3178,6 +3178,12 @@ static int mvneta_mac_link_state(struct
 	state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
 	state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
 
+	state->pause = 0;
+	if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE)
+		state->pause |= MLO_PAUSE_RX;
+	if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE)
+		state->pause |= MLO_PAUSE_TX;
+
 	return 1;
 }
 
@@ -3220,6 +3226,8 @@ static void mvneta_mac_config(struct net
 
 	if (phylink_test(state->advertising, Pause))
 		new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
+	if (state->pause & MLO_PAUSE_TXRX_MASK)
+		new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
 
 	switch (mode) {
 	case MLO_AN_SGMII:
@@ -3244,7 +3252,7 @@ static void mvneta_mac_config(struct net
 			 /* The MAC only supports FD mode */
 			 MVNETA_GMAC_CONFIG_FULL_DUPLEX;
 
-		if (state->an_enabled)
+		if (state->pause & MLO_PAUSE_AN && state->an_enabled)
 			new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
 		break;
 
@@ -3710,6 +3718,22 @@ static int mvneta_ethtool_set_ringparam(
 	return 0;
 }
 
+static void mvneta_ethtool_get_pauseparam(struct net_device *dev,
+					  struct ethtool_pauseparam *pause)
+{
+	struct mvneta_port *pp = netdev_priv(dev);
+
+	phylink_ethtool_get_pauseparam(pp->phylink, pause);
+}
+
+static int mvneta_ethtool_set_pauseparam(struct net_device *dev,
+					 struct ethtool_pauseparam *pause)
+{
+	struct mvneta_port *pp = netdev_priv(dev);
+
+	return phylink_ethtool_set_pauseparam(pp->phylink, pause);
+}
+
 static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset,
 				       u8 *data)
 {
@@ -3901,6 +3925,8 @@ const struct ethtool_ops mvneta_eth_tool
 	.get_drvinfo    = mvneta_ethtool_get_drvinfo,
 	.get_ringparam  = mvneta_ethtool_get_ringparam,
 	.set_ringparam	= mvneta_ethtool_set_ringparam,
+	.get_pauseparam	= mvneta_ethtool_get_pauseparam,
+	.set_pauseparam	= mvneta_ethtool_set_pauseparam,
 	.get_strings	= mvneta_ethtool_get_strings,
 	.get_ethtool_stats = mvneta_ethtool_get_stats,
 	.get_sset_count	= mvneta_ethtool_get_sset_count,