openwrtv4/target/linux/brcm2708/patches-3.14/0029-dwc_otg-fiq_fsm-Base-commit-for-driver-rewrite.patch

From 07cbbba78cad9e0883daa2210a9b83ab803e28ab Mon Sep 17 00:00:00 2001
From: P33M <P33M@github.com>
Date: Wed, 19 Mar 2014 12:58:23 +0000
Subject: [PATCH 29/54] dwc_otg: fiq_fsm: Base commit for driver rewrite

This commit removes the previous FIQ fixes entirely and adds fiq_fsm.

This rewrite features much more complete support for split transactions
and takes into account several OTG hardware bugs. High-speed
isochronous transactions are also capable of being performed by fiq_fsm.

All driver options have been removed and replaced with:
  - dwc_otg.fiq_enable (bool)
  - dwc_otg.fiq_fsm_enable (bool)
  - dwc_otg.fiq_fsm_mask (bitmask)
  - dwc_otg.nak_holdoff (unsigned int)

Defaults are specified such that fiq_fsm behaves similarly to the
previously implemented FIQ fixes.

fiq_fsm: Push error recovery into the FIQ when fiq_fsm is used

If the transfer associated with a QTD failed due to a bus error, the HCD
would retry the transfer up to 3 times (implementing the USB2.0
three-strikes retry in software).

Due to the masking mechanism used by fiq_fsm, it is only possible to pass
a single interrupt through to the HCD per-transfer.

In this instance host channels would fall off the radar because the error
reset would function, but the subsequent channel halt would be lost.

Push the error count reset into the FIQ handler.

fiq_fsm: Implement timeout mechanism

For full-speed endpoints with a large packet size, interrupt latency
runs the risk of the FIQ starting a transaction too late in a full-speed
frame. If the device is still transmitting data when EOF2 for the
downstream frame occurs, the hub will disable the port. This change is
not reflected in the hub status endpoint and the device becomes
unresponsive.

Prevent high-bandwidth transactions from being started too late in a
frame. The mechanism is not guaranteed: a combination of bit stuffing
and hub latency may still result in a device overrunning.

fiq_fsm: fix bounce buffer utilisation for Isochronous OUT

Multi-packet isochronous OUT transactions were subject to a few bounday
bugs. Fix them.

Audio playback is now much more robust: however, an issue stands with
devices that have adaptive sinks - ALSA plays samples too fast.

dwc_otg: Return full-speed frame numbers in HS mode

The frame counter increments on every *microframe* in high-speed mode.
Most device drivers expect this number to be in full-speed frames - this
caused considerable confusion to e.g. snd_usb_audio which uses the
frame counter to estimate the number of samples played.

fiq_fsm: save PID on completion of interrupt OUT transfers

Also add edge case handling for interrupt transports.

Note that for periodic split IN, data toggles are unimplemented in the
OTG host hardware - it unconditionally accepts any PID.

fiq_fsm: add missing case for fiq_fsm_tt_in_use()

Certain combinations of bitrate and endpoint activity could
result in a periodic transaction erroneously getting started
while the previous Isochronous OUT was still active.

fiq_fsm: clear hcintmsk for aborted transactions

Prevents the FIQ from erroneously handling interrupts
on a timed out channel.

fiq_fsm: enable by default

fiq_fsm: fix dequeues for non-periodic split transactions

If a dequeue happened between the SSPLIT and CSPLIT phases of the
transaction, the HCD would never receive an interrupt.

fiq_fsm: Disable by default

fiq_fsm: Handle HC babble errors

The HCTSIZ transfer size field raises a babble interrupt if
the counter wraps. Handle the resulting interrupt in this case.

dwc_otg: fix interrupt registration for fiq_enable=0

Additionally make the module parameter conditional for wherever
hcd->fiq_state is touched.

fiq_fsm: Enable by default
---
 arch/arm/mach-bcm2708/bcm2708.c              |   24 +-
 drivers/usb/host/dwc_otg/Makefile            |    3 +-
 drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c  |   47 +-
 drivers/usb/host/dwc_otg/dwc_otg_driver.c    |   51 +-
 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c   | 1290 ++++++++++++++++++++++++++
 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h   |  353 +++++++
 drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S  |   81 ++
 drivers/usb/host/dwc_otg/dwc_otg_hcd.c       |  775 +++++++++++++---
 drivers/usb/host/dwc_otg/dwc_otg_hcd.h       |   11 +
 drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c  |  999 ++++++++++----------
 drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c |  113 ++-
 drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c |   41 +-
 drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c  |  113 ---
 drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h  |   48 -
 drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c |    8 +-
 15 files changed, 2992 insertions(+), 965 deletions(-)
 create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c
 create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h
 create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S
 delete mode 100755 drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c
 delete mode 100755 drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h

diff --git a/arch/arm/mach-bcm2708/bcm2708.c b/arch/arm/mach-bcm2708/bcm2708.c
index 47a66f8..89d0824 100644
--- a/arch/arm/mach-bcm2708/bcm2708.c
+++ b/arch/arm/mach-bcm2708/bcm2708.c
@@ -330,22 +330,13 @@ static struct resource bcm2708_usb_resources[] = {
 	       .end = IRQ_HOSTPORT,
 	       .flags = IORESOURCE_IRQ,
 	       },
+	[3] = {
+			.start = IRQ_USB,
+			.end = IRQ_USB,
+			.flags = IORESOURCE_IRQ,
+			},
 };
 
-bool fiq_fix_enable = true;
-
-static struct resource bcm2708_usb_resources_no_fiq_fix[] = {
-	[0] = {
-		.start = USB_BASE,
-		.end = USB_BASE + SZ_128K - 1,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = IRQ_USB,
-		.end = IRQ_USB,
-		.flags = IORESOURCE_IRQ,
-		},
-};
 
 static u64 usb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
 
@@ -729,11 +720,6 @@ void __init bcm2708_init(void)
 #endif
 	bcm_register_device(&bcm2708_systemtimer_device);
 	bcm_register_device(&bcm2708_fb_device);
-	if (!fiq_fix_enable)
-	{
-		bcm2708_usb_device.resource = bcm2708_usb_resources_no_fiq_fix;
-		bcm2708_usb_device.num_resources = ARRAY_SIZE(bcm2708_usb_resources_no_fiq_fix);
-	}
 	bcm_register_device(&bcm2708_usb_device);
 	bcm_register_device(&bcm2708_uart1_device);
 	bcm_register_device(&bcm2708_powerman_device);
diff --git a/drivers/usb/host/dwc_otg/Makefile b/drivers/usb/host/dwc_otg/Makefile
index a56f193..e7bdd12 100644
--- a/drivers/usb/host/dwc_otg/Makefile
+++ b/drivers/usb/host/dwc_otg/Makefile
@@ -36,7 +36,8 @@ dwc_otg-objs	+= dwc_otg_cil.o dwc_otg_cil_intr.o
 dwc_otg-objs	+= dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o
 dwc_otg-objs	+= dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o
 dwc_otg-objs	+= dwc_otg_adp.o
-dwc_otg-objs	+= dwc_otg_mphi_fix.o
+dwc_otg-objs	+= dwc_otg_fiq_fsm.o
+dwc_otg-objs	+= dwc_otg_fiq_stub.o
 ifneq ($(CFI),)
 dwc_otg-objs	+= dwc_otg_cfi.o
 endif
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
index 2f8b3bd..065807f 100644
--- a/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
@@ -45,7 +45,6 @@
 #include "dwc_otg_driver.h"
 #include "dwc_otg_pcd.h"
 #include "dwc_otg_hcd.h"
-#include "dwc_otg_mphi_fix.h"
 
 #ifdef DEBUG
 inline const char *op_state_str(dwc_otg_core_if_t * core_if)
@@ -1319,7 +1318,7 @@ static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if)
 /**
  * This function returns the Core Interrupt register.
  */
-static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if, gintmsk_data_t *reenable_gintmsk)
+static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if, gintmsk_data_t *reenable_gintmsk, dwc_otg_hcd_t *hcd)
 {
 	gahbcfg_data_t gahbcfg = {.d32 = 0 };
 	gintsts_data_t gintsts;
@@ -1345,16 +1344,15 @@ static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if, gin
 	}
 	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
 	gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
-	{
-		unsigned long flags;
-
-		// Re-enable the saved interrupts
-		local_irq_save(flags);
+	if(fiq_enable) {
 		local_fiq_disable();
-		gintmsk.d32 |= gintmsk_common.d32;
-		gintsts_saved.d32 &= ~gintmsk_common.d32;
-		reenable_gintmsk->d32 = gintmsk.d32;
-		local_irq_restore(flags);
+		/* Pull in the interrupts that the FIQ has masked */
+		gintmsk.d32 |= ~(hcd->fiq_state->gintmsk_saved.d32);
+		/* for the upstairs function to reenable - have to read it here in case FIQ triggers again */
+		reenable_gintmsk->d32 |= gintmsk.d32;
+		reenable_gintmsk->d32 |= ~(hcd->fiq_state->gintmsk_saved.d32);
+		reenable_gintmsk->d32 &= gintmsk_common.d32;
+		local_fiq_enable();
 	}
 
 	gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg);
@@ -1366,13 +1364,15 @@ static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if, gin
 			    gintsts.d32, gintmsk.d32);
 	}
 #endif
-	if (!fiq_fix_enable){
+	if (!fiq_enable){
 		if (gahbcfg.b.glblintrmsk)
 			return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
 		else
 			return 0;
-	}
-	else {
+	} else {
+		/* Our IRQ kicker is no longer the USB hardware, it's the MPHI interface.
+		 * Can't trust the global interrupt mask bit in this case.
+		 */
 		return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
 	}
 
@@ -1406,7 +1406,7 @@ int32_t dwc_otg_handle_common_intr(void *dev)
 {
 	int retval = 0;
 	gintsts_data_t gintsts;
-	gintmsk_data_t reenable_gintmsk;
+	gintmsk_data_t gintmsk_reenable = { .d32 = 0 };
 	gpwrdn_data_t gpwrdn = {.d32 = 0 };
 	dwc_otg_device_t *otg_dev = dev;
 	dwc_otg_core_if_t *core_if = otg_dev->core_if;
@@ -1428,7 +1428,10 @@ int32_t dwc_otg_handle_common_intr(void *dev)
 	}
 
 	if (core_if->hibernation_suspend <= 0) {
-		gintsts.d32 = dwc_otg_read_common_intr(core_if, &reenable_gintmsk);
+		/* read_common will have to poke the FIQ's saved mask. We must then clear this mask at the end
+		 * of this handler - god only knows why it's done like this
+		 */
+		gintsts.d32 = dwc_otg_read_common_intr(core_if, &gintmsk_reenable, otg_dev->hcd);
 
 		if (gintsts.b.modemismatch) {
 			retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
@@ -1525,11 +1528,16 @@ int32_t dwc_otg_handle_common_intr(void *dev)
 			gintsts.b.portintr = 1;
 			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32);
 			retval |= 1;
-			reenable_gintmsk.b.portintr = 1;
+			gintmsk_reenable.b.portintr = 1;
 
 		}
-
-		DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, reenable_gintmsk.d32);
+		/* Did we actually handle anything? if so, unmask the interrupt */
+//		fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "CILOUT %1d", retval);
+//		fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintsts.d32);
+//		fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintmsk_reenable.d32);
+		if (retval) {
+			DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_reenable.d32);
+		}
 
 	} else {
 		DWC_DEBUGPL(DBG_ANY, "gpwrdn=%08x\n", gpwrdn.d32);
@@ -1583,6 +1591,5 @@ int32_t dwc_otg_handle_common_intr(void *dev)
 	}
 	if (core_if->lock)
 		DWC_SPINUNLOCK(core_if->lock);
-
 	return retval;
 }
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_driver.c b/drivers/usb/host/dwc_otg/dwc_otg_driver.c
index f06c3d22..dc7cd32 100644
--- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c
@@ -56,6 +56,7 @@
 #include "dwc_otg_core_if.h"
 #include "dwc_otg_pcd_if.h"
 #include "dwc_otg_hcd_if.h"
+#include "dwc_otg_fiq_fsm.h"
 
 #define DWC_DRIVER_VERSION	"3.00a 10-AUG-2012"
 #define DWC_DRIVER_DESC		"HS OTG USB Controller driver"
@@ -64,7 +65,6 @@ bool microframe_schedule=true;
 
 static const char dwc_driver_name[] = "dwc_otg";
 
-extern void* dummy_send;
 
 extern int pcd_init(
 #ifdef LM_INTERFACE
@@ -240,13 +240,14 @@ static struct dwc_otg_driver_module_params dwc_otg_module_params = {
 	.adp_enable = -1,
 };
 
-//Global variable to switch the fiq fix on or off (declared in bcm2708.c)
-extern bool fiq_fix_enable;
+//Global variable to switch the fiq fix on or off
+bool fiq_enable = 1;
 // Global variable to enable the split transaction fix
-bool fiq_split_enable = true;
-//Global variable to switch the nak holdoff on or off
-bool nak_holdoff_enable = true;
+bool fiq_fsm_enable = true;
+//Bulk split-transaction NAK holdoff in microframes
+uint16_t nak_holdoff = 8;
 
+unsigned short fiq_fsm_mask = 0x07;
 
 /**
  * This function shows the Driver Version.
@@ -800,7 +801,7 @@ static int dwc_otg_driver_probe(
 	dwc_otg_device->os_dep.base = ioremap_nocache(_dev->resource[0].start,
                                                       _dev->resource[0].end -
                                                       _dev->resource[0].start+1);
-	if (fiq_fix_enable)
+	if (fiq_enable)
 	{
 		if (!request_mem_region(_dev->resource[1].start,
 	                                _dev->resource[1].end - _dev->resource[1].start + 1,
@@ -813,7 +814,6 @@ static int dwc_otg_driver_probe(
 		dwc_otg_device->os_dep.mphi_base = ioremap_nocache(_dev->resource[1].start,
 							    _dev->resource[1].end -
 							    _dev->resource[1].start + 1);
-		dummy_send = (void *) kmalloc(16, GFP_ATOMIC);
 	}
 
 #else
@@ -902,9 +902,9 @@ static int dwc_otg_driver_probe(
 	 */
 
 #if defined(PLATFORM_INTERFACE)
-        devirq = platform_get_irq(_dev, 0);
+	devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1);
 #else
-        devirq = _dev->irq;
+	devirq = _dev->irq;
 #endif
 	DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n",
 		    devirq);
@@ -1071,9 +1071,9 @@ static int __init dwc_otg_driver_init(void)
 	int error;
         struct device_driver *drv;
 
-	if(fiq_split_enable && !fiq_fix_enable) {
-		printk(KERN_WARNING "dwc_otg: fiq_split_enable was set without fiq_fix_enable! Correcting.\n");
-		fiq_fix_enable = 1;
+	if(fiq_fsm_enable && !fiq_enable) {
+		printk(KERN_WARNING "dwc_otg: fiq_fsm_enable was set without fiq_enable! Correcting.\n");
+		fiq_enable = 1;
 	}
 
 	printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name,
@@ -1095,9 +1095,9 @@ static int __init dwc_otg_driver_init(void)
 		printk(KERN_ERR "%s retval=%d\n", __func__, retval);
 		return retval;
 	}
-	printk(KERN_DEBUG "dwc_otg: FIQ %s\n", fiq_fix_enable ? "enabled":"disabled");
-	printk(KERN_DEBUG "dwc_otg: NAK holdoff %s\n", nak_holdoff_enable ? "enabled":"disabled");
-	printk(KERN_DEBUG "dwc_otg: FIQ split fix %s\n", fiq_split_enable ? "enabled":"disabled");
+	printk(KERN_DEBUG "dwc_otg: FIQ %s\n", fiq_enable ? "enabled":"disabled");
+	printk(KERN_DEBUG "dwc_otg: NAK holdoff %s\n", nak_holdoff ? "enabled":"disabled");
+	printk(KERN_DEBUG "dwc_otg: FIQ split-transaction FSM %s\n", fiq_fsm_enable ? "enabled":"disabled");
 
 	error = driver_create_file(drv, &driver_attr_version);
 #ifdef DEBUG
@@ -1378,12 +1378,19 @@ MODULE_PARM_DESC(otg_ver, "OTG revision supported 0=OTG 1.3 1=OTG 2.0");
 module_param(microframe_schedule, bool, 0444);
 MODULE_PARM_DESC(microframe_schedule, "Enable the microframe scheduler");
 
-module_param(fiq_fix_enable, bool, 0444);
-MODULE_PARM_DESC(fiq_fix_enable, "Enable the fiq fix");
-module_param(nak_holdoff_enable, bool, 0444);
-MODULE_PARM_DESC(nak_holdoff_enable, "Enable the NAK holdoff");
-module_param(fiq_split_enable, bool, 0444);
-MODULE_PARM_DESC(fiq_split_enable, "Enable the FIQ fix on split transactions");
+module_param(fiq_enable, bool, 0444);
+MODULE_PARM_DESC(fiq_enable, "Enable the FIQ");
+module_param(nak_holdoff, ushort, 0644);
+MODULE_PARM_DESC(nak_holdoff, "Throttle duration for bulk split-transaction endpoints on a NAK. Default 8");
+module_param(fiq_fsm_enable, bool, 0444);
+MODULE_PARM_DESC(fiq_fsm_enable, "Enable the FIQ to perform split transactions as defined by fiq_fsm_mask");
+module_param(fiq_fsm_mask, ushort, 0444);
+MODULE_PARM_DESC(fiq_fsm_mask, "Bitmask of transactions to perform in the FIQ.\n"
+					"Bit 0 : Non-periodic split transactions\n"
+					"Bit 1 : Periodic split transactions\n"
+					"Bit 2 : High-speed multi-transfer isochronous\n"
+					"All other bits should be set 0.");
+
 
 /** @page "Module Parameters"
  *
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c
new file mode 100644
index 0000000..7aad7f7
--- /dev/null
+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c
@@ -0,0 +1,1290 @@
+/*
+ * dwc_otg_fiq_fsm.c - The finite state machine FIQ
+ *
+ * Copyright (c) 2013 Raspberry Pi Foundation
+ *
+ * Author: Jonathan Bell <jonathan@raspberrypi.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *	* Redistributions of source code must retain the above copyright
+ *	  notice, this list of conditions and the following disclaimer.
+ *	* Redistributions in binary form must reproduce the above copyright
+ *	  notice, this list of conditions and the following disclaimer in the
+ *	  documentation and/or other materials provided with the distribution.
+ *	* Neither the name of Raspberry Pi nor the
+ *	  names of its contributors may be used to endorse or promote products
+ *	  derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This FIQ implements functionality that performs split transactions on
+ * the dwc_otg hardware without any outside intervention. A split transaction
+ * is "queued" by nominating a specific host channel to perform the entirety
+ * of a split transaction. This FIQ will then perform the microframe-precise
+ * scheduling required in each phase of the transaction until completion.
+ *
+ * The FIQ functionality is glued into the Synopsys driver via the entry point
+ * in the FSM enqueue function, and at the exit point in handling a HC interrupt
+ * for a FSM-enabled channel.
+ *
+ * NB: Large parts of this implementation have architecture-specific code.
+ * For porting this functionality to other ARM machines, the minimum is required:
+ * - An interrupt controller allowing the top-level dwc USB interrupt to be routed
+ *   to the FIQ
+ * - A method of forcing a software generated interrupt from FIQ mode that then
+ *   triggers an IRQ entry (with the dwc USB handler called by this IRQ number)
+ * - Guaranteed interrupt routing such that both the FIQ and SGI occur on the same
+ *   processor core - there is no locking between the FIQ and IRQ (aside from
+ *   local_fiq_disable)
+ *
+ */
+
+#include "dwc_otg_fiq_fsm.h"
+
+
+char buffer[1000*16];
+int wptr;
+void notrace _fiq_print(enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...)
+{
+	enum fiq_debug_level dbg_lvl_req = FIQDBG_ERR;
+	va_list args;
+	char text[17];
+	hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + 0x408) };
+
+	if((dbg_lvl & dbg_lvl_req) || dbg_lvl == FIQDBG_ERR)
+	{
+		snprintf(text, 9, " %4d:%1u  ", hfnum.b.frnum/8, hfnum.b.frnum & 7);
+		va_start(args, fmt);
+		vsnprintf(text+8, 9, fmt, args);
+		va_end(args);
+
+		memcpy(buffer + wptr, text, 16);
+		wptr = (wptr + 16) % sizeof(buffer);
+	}
+}
+
+/**
+ * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction
+ * @channel: channel to re-enable
+ */
+static void fiq_fsm_restart_channel(struct fiq_state *st, int n, int force)
+{
+	hcchar_data_t hcchar = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR) };
+	
+	hcchar.b.chen = 0;
+	if (st->channel[n].hcchar_copy.b.eptype & 0x1) {
+		hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) };
+		/* Hardware bug workaround: update the ssplit index */
+		if (st->channel[n].hcsplt_copy.b.spltena)
+			st->channel[n].expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF;
+		
+		hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0	: 1;
+	}
+	
+	FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32);
+	hcchar.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR);
+	hcchar.b.chen = 1;
+
+	FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32);
+	fiq_print(FIQDBG_INT, st, "HCGO %01d %01d", n, force);
+}
+
+/**
+ * fiq_fsm_setup_csplit() - Prepare a host channel for a CSplit transaction stage
+ * @st: Pointer to the channel's state
+ * @n : channel number
+ *
+ * Change host channel registers to perform a complete-split transaction. Being mindful of the
+ * endpoint direction, set control regs up correctly.
+ */
+static void notrace fiq_fsm_setup_csplit(struct fiq_state *st, int n)
+{
+	hcsplt_data_t hcsplt = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT) };
+	hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) };
+	
+	hcsplt.b.compsplt = 1;
+	if (st->channel[n].hcchar_copy.b.epdir == 1) {
+		// If IN, the CSPLIT result contains the data or a hub handshake. hctsiz = maxpacket.
+		hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize;
+	} else {
+		// If OUT, the CSPLIT result contains handshake only.
+		hctsiz.b.xfersize = 0;
+	}
+	FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32);
+	FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32);
+	mb();
+}
+
+static inline int notrace fiq_get_xfer_len(struct fiq_state *st, int n)
+{
+	/* The xfersize register is a bit wonky. For IN transfers, it decrements by the packet size. */
+	hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) };
+	
+	if (st->channel[n].hcchar_copy.b.epdir == 0) {
+		return st->channel[n].hctsiz_copy.b.xfersize;
+	} else {
+		return st->channel[n].hctsiz_copy.b.xfersize - hctsiz.b.xfersize;
+	}
+
+}
+
+
+/**
+ * fiq_increment_dma_buf() - update DMA address for bounce buffers after a CSPLIT
+ *
+ * Of use only for IN periodic transfers.
+ */
+static int notrace fiq_increment_dma_buf(struct fiq_state *st, int num_channels, int n)
+{
+	hcdma_data_t hcdma;
+	int i = st->channel[n].dma_info.index;
+	int len;
+	struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base;
+
+	len = fiq_get_xfer_len(st, n);
+	fiq_print(FIQDBG_INT, st, "LEN: %03d", len);
+	st->channel[n].dma_info.slot_len[i] = len;
+	i++;
+	if (i > 6)
+		BUG();
+
+	hcdma.d32 = (dma_addr_t) &blob->channel[n].index[i].buf[0];
+	FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32);
+	st->channel[n].dma_info.index = i;
+	return 0;
+}
+
+/**
+ * fiq_reload_hctsiz() - for IN transactions, reset HCTSIZ
+ */
+static void notrace fiq_fsm_reload_hctsiz(struct fiq_state *st, int n)
+{
+	hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) };
+	hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize;
+	hctsiz.b.pktcnt = 1;
+	FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32);
+}
+
+/**
+ * fiq_iso_out_advance() - update DMA address and split position bits
+ * for isochronous OUT transactions.
+ *
+ * Returns 1 if this is the last packet queued, 0 otherwise. Split-ALL and
+ * Split-BEGIN states are not handled - this is done when the transaction was queued.
+ *
+ * This function must only be called from the FIQ_ISO_OUT_ACTIVE state.
+ */
+static int notrace fiq_iso_out_advance(struct fiq_state *st, int num_channels, int n)
+{
+	hcsplt_data_t hcsplt;
+	hctsiz_data_t hctsiz;
+	hcdma_data_t hcdma;
+	struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base;
+	int last = 0;
+	int i = st->channel[n].dma_info.index;
+	
+	fiq_print(FIQDBG_INT, st, "ADV %01d %01d ", n, i);
+	i++;
+	if (i == 4)
+		last = 1;
+	if (st->channel[n].dma_info.slot_len[i+1] == 255)
+		last = 1;
+
+	/* New DMA address - address of bounce buffer referred to in index */
+	hcdma.d32 = (uint32_t) &blob->channel[n].index[i].buf[0];
+	//hcdma.d32 = FIQ_READ(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n));
+	//hcdma.d32 += st->channel[n].dma_info.slot_len[i];
+	fiq_print(FIQDBG_INT, st, "LAST: %01d ", last);
+	fiq_print(FIQDBG_INT, st, "LEN: %03d", st->channel[n].dma_info.slot_len[i]);
+	hcsplt.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT);
+	hctsiz.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ);
+	hcsplt.b.xactpos = (last) ? ISOC_XACTPOS_END : ISOC_XACTPOS_MID;
+	/* Set up new packet length */
+	hctsiz.b.pktcnt = 1;
+	hctsiz.b.xfersize = st->channel[n].dma_info.slot_len[i];
+	fiq_print(FIQDBG_INT, st, "%08x", hctsiz.d32);
+	
+	st->channel[n].dma_info.index++;
+	FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32);
+	FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32);
+	FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32);
+	return last;
+}
+
+/**
+ * fiq_fsm_tt_next_isoc() - queue next pending isochronous out start-split on a TT
+ * 
+ * Despite the limitations of the DWC core, we can force a microframe pipeline of
+ * isochronous OUT start-split transactions while waiting for a corresponding other-type
+ * of endpoint to finish its CSPLITs. TTs have big periodic buffers therefore it
+ * is very unlikely that filling the start-split FIFO will cause data loss.
+ * This allows much better interleaving of transactions in an order-independent way-
+ * there is no requirement to prioritise isochronous, just a state-space search has
+ * to be performed on each periodic start-split complete interrupt.
+ */
+static int notrace fiq_fsm_tt_next_isoc(struct fiq_state *st, int num_channels, int n)
+{
+	int hub_addr = st->channel[n].hub_addr;
+	int port_addr = st->channel[n].port_addr;
+	int i, poked = 0;
+	for (i = 0; i < num_channels; i++) {
+		if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH)
+			continue;
+		if (st->channel[i].hub_addr == hub_addr &&
+			st->channel[i].port_addr == port_addr) {
+			switch (st->channel[i].fsm) {
+			case FIQ_PER_ISO_OUT_PENDING:
+				if (st->channel[i].nrpackets == 1) {
+					st->channel[i].fsm = FIQ_PER_ISO_OUT_LAST;
+				} else {
+					st->channel[i].fsm = FIQ_PER_ISO_OUT_ACTIVE;
+				}
+				fiq_fsm_restart_channel(st, i, 0);
+				poked = 1;
+				break;
+
+			default:
+				break;
+			}
+		}
+		if (poked)
+			break;
+	}
+	return poked;
+}
+
+/**
+ * fiq_fsm_tt_in_use() - search for host channels using this TT
+ * @n: Channel to use as reference
+ *
+ */
+int notrace noinline fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n)
+{
+	int hub_addr = st->channel[n].hub_addr;
+	int port_addr = st->channel[n].port_addr;
+	int i, in_use = 0;
+	for (i = 0; i < num_channels; i++) {
+		if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH)
+			continue;
+		switch (st->channel[i].fsm) {
+		/* TT is reserved for channels that are in the middle of a periodic
+		 * split transaction.
+		 */
+		case FIQ_PER_SSPLIT_STARTED:
+		case FIQ_PER_CSPLIT_WAIT:
+		case FIQ_PER_CSPLIT_NYET1:
+		//case FIQ_PER_CSPLIT_POLL:
+		case FIQ_PER_ISO_OUT_ACTIVE:
+		case FIQ_PER_ISO_OUT_LAST:
+			if (st->channel[i].hub_addr == hub_addr &&
+				st->channel[i].port_addr == port_addr) {
+				in_use = 1;
+			}
+			break;
+		default:
+			break;
+		}
+		if (in_use)
+			break;
+	}
+	return in_use;
+}
+
+/**
+ * fiq_fsm_more_csplits() - determine whether additional CSPLITs need
+ * 			to be issued for this IN transaction.
+ *
+ * We cannot tell the inbound PID of a data packet due to hardware limitations.
+ * we need to make an educated guess as to whether we need to queue another CSPLIT
+ * or not. A no-brainer is when we have received enough data to fill the endpoint
+ * size, but for endpoints that give variable-length data then we have to resort
+ * to heuristics.
+ *
+ * We also return whether this is the last CSPLIT to be queued, again based on
+ * heuristics. This is to allow a 1-uframe overlap of periodic split transactions.
+ * Note: requires at least 1 CSPLIT to have been performed prior to being called.
+ */
+
+/*
+ * We need some way of guaranteeing if a returned periodic packet of size X
+ * has a DATA0 PID.
+ * The heuristic value of 144 bytes assumes that the received data has maximal
+ * bit-stuffing and the clock frequency of the transmitting device is at the lowest
+ * permissible limit. If the transfer length results in a final packet size
+ * 144 < p <= 188, then an erroneous CSPLIT will be issued.
+ * Also used to ensure that an endpoint will nominally only return a single
+ * complete-split worth of data.
+ */
+#define DATA0_PID_HEURISTIC 144
+
+static int notrace noinline fiq_fsm_more_csplits(struct fiq_state *state, int n, int *probably_last)
+{
+
+	int i;
+	int total_len = 0;
+	int more_needed = 1;
+	struct fiq_channel_state *st = &state->channel[n];
+
+	for (i = 0; i < st->dma_info.index; i++) {
+			total_len += st->dma_info.slot_len[i];
+	}
+
+	*probably_last = 0;
+
+	if (st->hcchar_copy.b.eptype == 0x3) {
+		/*
+		 * An interrupt endpoint will take max 2 CSPLITs. if we are receiving data
+		 * then this is definitely the last CSPLIT.
+		 */
+		*probably_last = 1;
+	} else {
+		/* Isoc IN. This is a bit risky if we are the first transaction:
+		 * we may have been held off slightly. */
+		if (i > 1 && st->dma_info.slot_len[st->dma_info.index-1] <= DATA0_PID_HEURISTIC) {
+			more_needed = 0;
+		}
+		/* If in the next uframe we will receive enough data to fill the endpoint,
+		 * then only issue 1 more csplit.
+		 */
+		if (st->hctsiz_copy.b.xfersize - total_len <= DATA0_PID_HEURISTIC)
+			*probably_last = 1;
+	}
+
+	if (total_len >= st->hctsiz_copy.b.xfersize || 
+		i == 6 || total_len == 0)
+		/* Note: due to bit stuffing it is possible to have > 6 CSPLITs for
+		 * a single endpoint. Accepting more would completely break our scheduling mechanism though
+		 * - in these extreme cases we will pass through a truncated packet.
+		 */
+		more_needed = 0;	
+	
+	return more_needed;
+}
+
+/**
+ * fiq_fsm_too_late() - Test transaction for lateness
+ * 
+ * If a SSPLIT for a large IN transaction is issued too late in a frame,
+ * the hub will disable the port to the device and respond with ERR handshakes.
+ * The hub status endpoint will not reflect this change.
+ * Returns 1 if we will issue a SSPLIT that will result in a device babble.
+ */
+int notrace fiq_fsm_too_late(struct fiq_state *st, int n)
+{
+	int uframe;
+	hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) };
+	uframe = hfnum.b.frnum & 0x7;
+	if ((uframe < 6) && (st->channel[n].nrpackets + 1 + uframe > 7)) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+
+/**
+ * fiq_fsm_start_next_periodic() - A half-arsed attempt at a microframe pipeline
+ *
+ * Search pending transactions in the start-split pending state and queue them.
+ * Don't queue packets in uframe .5 (comes out in .6) (USB2.0 11.18.4).
+ * Note: we specifically don't do isochronous OUT transactions first because better
+ * use of the TT's start-split fifo can be achieved by pipelining an IN before an OUT.
+ */
+static void notrace noinline fiq_fsm_start_next_periodic(struct fiq_state *st, int num_channels)
+{
+	int n;
+	hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) };
+	if ((hfnum.b.frnum & 0x7) == 5)
+		return;
+	for (n = 0; n < num_channels; n++) {
+		if (st->channel[n].fsm == FIQ_PER_SSPLIT_QUEUED) {
+			/* Check to see if any other transactions are using this TT */
+			if(!fiq_fsm_tt_in_use(st, num_channels, n)) {
+				if (!fiq_fsm_too_late(st, n)) {
+					st->channel[n].fsm = FIQ_PER_SSPLIT_STARTED;
+					fiq_print(FIQDBG_INT, st, "NEXTPER ");
+					fiq_fsm_restart_channel(st, n, 0);
+				} else {
+					st->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT;
+				}
+				break;
+			}
+		}
+	}
+	for (n = 0; n < num_channels; n++) {
+		if (st->channel[n].fsm == FIQ_PER_ISO_OUT_PENDING) {
+			if (!fiq_fsm_tt_in_use(st, num_channels, n)) {
+				fiq_print(FIQDBG_INT, st, "NEXTISO ");	
+				st->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE;
+				fiq_fsm_restart_channel(st, n, 0);
+				break;
+			}
+		}
+	}
+}
+
+/**
+ * fiq_fsm_update_hs_isoc() - update isochronous frame and transfer data
+ * @state:	Pointer to fiq_state
+ * @n:		Channel transaction is active on
+ * @hcint:	Copy of host channel interrupt register
+ *
+ * Returns 0 if there are no more transactions for this HC to do, 1
+ * otherwise.
+ */
+static int notrace noinline fiq_fsm_update_hs_isoc(struct fiq_state *state, int n, hcint_data_t hcint)
+{
+	struct fiq_channel_state *st = &state->channel[n];
+	int xfer_len = 0, nrpackets = 0;
+	hcdma_data_t hcdma;
+	fiq_print(FIQDBG_INT, state, "HSISO %02d", n);
+
+	xfer_len = fiq_get_xfer_len(state, n);
+	st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].actual_length = xfer_len;
+
+	st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].status = hcint.d32;
+
+	st->hs_isoc_info.index++;
+	if (st->hs_isoc_info.index == st->hs_isoc_info.nrframes) {
+		return 0;
+	}
+
+	/* grab the next DMA address offset from the array */
+	hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].offset;
+	FIQ_WRITE(state->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32);
+
+	/* We need to set multi_count. This is a bit tricky - has to be set per-transaction as
+	 * the core needs to be told to send the correct number. Caution: for IN transfers,
+	 * this is always set to the maximum size of the endpoint. */
+	xfer_len = st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].length;
+	/* Integer divide in a FIQ: fun. FIXME: make this not suck */
+	nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps;
+	if (nrpackets == 0)
+		nrpackets = 1;
+	st->hcchar_copy.b.multicnt = nrpackets;
+	st->hctsiz_copy.b.pktcnt = nrpackets;
+
+	/* Initial PID also needs to be set */
+	if (st->hcchar_copy.b.epdir == 0) {
+		st->hctsiz_copy.b.xfersize = xfer_len;
+		switch (st->hcchar_copy.b.multicnt) {
+		case 1:
+			st->hctsiz_copy.b.pid = DWC_PID_DATA0;
+			break;
+		case 2:
+		case 3:
+			st->hctsiz_copy.b.pid = DWC_PID_MDATA;
+			break;
+		}
+
+	} else {
+		switch (st->hcchar_copy.b.multicnt) {
+		st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps;
+		case 1:
+			st->hctsiz_copy.b.pid = DWC_PID_DATA0;
+			break;
+		case 2:
+			st->hctsiz_copy.b.pid = DWC_PID_DATA1;
+			break;
+		case 3:
+			st->hctsiz_copy.b.pid = DWC_PID_DATA2;
+			break;
+		}
+	}
+	FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, st->hctsiz_copy.d32);
+	FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, st->hcchar_copy.d32);
+	/* Channel is enabled on hcint handler exit */
+	fiq_print(FIQDBG_INT, state, "HSISOOUT");
+	return 1;
+}
+
+
+/**
+ * fiq_fsm_do_sof() - FSM start-of-frame interrupt handler
+ * @state:	Pointer to the state struct passed from banked FIQ mode registers.
+ * @num_channels:	set according to the DWC hardware configuration
+ *
+ * The SOF handler in FSM mode has two functions
+ * 1. Hold off SOF from causing schedule advancement in IRQ context if there's
+ *    nothing to do
+ * 2. Advance certain FSM states that require either a microframe delay, or a microframe
+ *    of holdoff.
+ *
+ * The second part is architecture-specific to mach-bcm2835 -
+ * a sane interrupt controller would have a mask register for ARM interrupt sources
+ * to be promoted to the nFIQ line, but it doesn't. Instead a single interrupt
+ * number (USB) can be enabled. This means that certain parts of the USB specification
+ * that require "wait a little while, then issue another packet" cannot be fulfilled with
+ * the timing granularity required to achieve optimal throughout. The workaround is to use
+ * the SOF "timer" (125uS) to perform this task.
+ */
+static int notrace noinline fiq_fsm_do_sof(struct fiq_state *state, int num_channels)
+{
+	hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + HFNUM) };
+	int n;
+	int kick_irq = 0;
+
+	if ((hfnum.b.frnum & 0x7) == 1) {
+		/* We cannot issue csplits for transactions in the last frame past (n+1).1
+		 * Check to see if there are any transactions that are stale.
+		 * Boot them out.
+		 */
+		for (n = 0; n < num_channels; n++) {
+			switch (state->channel[n].fsm) {
+			case FIQ_PER_CSPLIT_WAIT:
+			case FIQ_PER_CSPLIT_NYET1:
+			case FIQ_PER_CSPLIT_POLL:
+			case FIQ_PER_CSPLIT_LAST:
+				/* Check if we are no longer in the same full-speed frame. */				
+				if (((state->channel[n].expected_uframe & 0x3FFF) & ~0x7) <
+						(hfnum.b.frnum & ~0x7))
+					state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT;
+				break;
+			default:
+				break;
+			}
+		}
+	}
+
+	for (n = 0; n < num_channels; n++) {
+		switch (state->channel[n].fsm) {
+		
+		case FIQ_NP_SSPLIT_RETRY:
+		case FIQ_NP_IN_CSPLIT_RETRY:
+		case FIQ_NP_OUT_CSPLIT_RETRY:
+			fiq_fsm_restart_channel(state, n, 0);
+			break;
+			
+		case FIQ_HS_ISOC_SLEEPING:
+			state->channel[n].fsm = FIQ_HS_ISOC_TURBO;
+			fiq_fsm_restart_channel(state, n, 0);
+			break;
+			
+		case FIQ_PER_SSPLIT_QUEUED:
+			if ((hfnum.b.frnum & 0x7) == 5)
+				break;
+			if(!fiq_fsm_tt_in_use(state, num_channels, n)) {
+				if (!fiq_fsm_too_late(state, n)) {
+					fiq_print(FIQDBG_INT, st, "SOF GO %01d", n);
+					fiq_fsm_restart_channel(state, n, 0);
+					state->channel[n].fsm = FIQ_PER_SSPLIT_STARTED;
+				} else {
+					/* Transaction cannot be started without risking a device babble error */
+					state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT;
+					state->haintmsk_saved.b2.chint &= ~(1 << n);
+					FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0);
+					kick_irq |= 1;
+				}
+			}
+			break;
+			
+		case FIQ_PER_ISO_OUT_PENDING:
+			/* Ordinarily, this should be poked after the SSPLIT
+			 * complete interrupt for a competing transfer on the same
+			 * TT. Doesn't happen for aborted transactions though.
+			 */
+			if ((hfnum.b.frnum & 0x7) >= 5)
+				break;
+			if (!fiq_fsm_tt_in_use(state, num_channels, n)) {
+				/* Hardware bug. SOF can sometimes occur after the channel halt interrupt
+				 * that caused this.
+				 */
+					fiq_fsm_restart_channel(state, n, 0);
+					fiq_print(FIQDBG_INT, state, "SOF ISOC");
+					if (state->channel[n].nrpackets == 1) {
+						state->channel[n].fsm = FIQ_PER_ISO_OUT_LAST;
+					} else {
+						state->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE;
+					}
+			}
+			break;
+
+		case FIQ_PER_CSPLIT_WAIT:
+			/* we are guaranteed to be in this state if and only if the SSPLIT interrupt
+			 * occurred when the bus transaction occurred. The SOF interrupt reversal bug
+			 * will utterly bugger this up though.
+			 */
+			if (hfnum.b.frnum != state->channel[n].expected_uframe) {
+				fiq_print(FIQDBG_INT, state, "SOFCS %d ", n);
+				state->channel[n].fsm = FIQ_PER_CSPLIT_POLL;
+				fiq_fsm_restart_channel(state, n, 0);
+				fiq_fsm_start_next_periodic(state, num_channels);
+				
+			}
+			break;
+		
+		case FIQ_PER_SPLIT_TIMEOUT:
+		case FIQ_DEQUEUE_ISSUED:
+			/* Ugly: we have to force a HCD interrupt.
+			 * Poke the mask for the channel in question.
+			 * We will take a fake SOF because of this, but
+			 * that's OK.
+			 */
+			state->haintmsk_saved.b2.chint &= ~(1 << n);
+			FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0);
+			kick_irq |= 1;
+			break;
+		
+		default:
+			break;
+		}
+	}
+
+	if (state->kick_np_queues ||
+			dwc_frame_num_le(state->next_sched_frame, hfnum.b.frnum))
+		kick_irq |= 1;
+
+	return !kick_irq;
+}
+
+
+/**
+ * fiq_fsm_do_hcintr() - FSM host channel interrupt handler
+ * @state: Pointer to the FIQ state struct
+ * @num_channels: Number of channels as per hardware config
+ * @n: channel for which HAINT(i) was raised
+ * 
+ * An important property is that only the CHHLT interrupt is unmasked. Unfortunately, AHBerr is as well.
+ */
+static int notrace noinline fiq_fsm_do_hcintr(struct fiq_state *state, int num_channels, int n)
+{
+	hcint_data_t hcint;
+	hcintmsk_data_t hcintmsk;
+	hcint_data_t hcint_probe;
+	hcchar_data_t hcchar;
+	int handled = 0;
+	int restart = 0;
+	int last_csplit = 0;
+	int start_next_periodic = 0;
+	struct fiq_channel_state *st = &state->channel[n];
+	hfnum_data_t hfnum;
+
+	hcint.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT);
+	hcintmsk.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK);
+	hcint_probe.d32 = hcint.d32 & hcintmsk.d32;
+
+	if (st->fsm != FIQ_PASSTHROUGH) {
+		fiq_print(FIQDBG_INT, state, "HC%01d ST%02d", n, st->fsm);
+		fiq_print(FIQDBG_INT, state, "%08x", hcint.d32);
+	}
+
+	switch (st->fsm) {
+	
+	case FIQ_PASSTHROUGH:
+	case FIQ_DEQUEUE_ISSUED:
+		/* doesn't belong to us, kick it upstairs */
+		break;
+
+	case FIQ_PASSTHROUGH_ERRORSTATE:
+		/* We are here to emulate the error recovery mechanism of the dwc HCD.
+		 * Several interrupts are unmasked if a previous transaction failed - it's
+		 * death for the FIQ to attempt to handle them as the channel isn't halted.
+		 * Emulate what the HCD does in this situation: mask and continue.
+		 * The FSM has no other state setup so this has to be handled out-of-band.
+		 */
+		fiq_print(FIQDBG_ERR, state, "ERRST %02d", n);
+		if (hcint_probe.b.nak || hcint_probe.b.ack || hcint_probe.b.datatglerr) {
+			fiq_print(FIQDBG_ERR, state, "RESET %02d", n);
+			st->nr_errors = 0;
+			hcintmsk.b.nak = 0;
+			hcintmsk.b.ack = 0;
+			hcintmsk.b.datatglerr = 0;
+			FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, hcintmsk.d32);
+			return 1;
+		}
+		if (hcint_probe.b.chhltd) {
+			fiq_print(FIQDBG_ERR, state, "CHHLT %02d", n);
+			fiq_print(FIQDBG_ERR, state, "%08x", hcint.d32);
+			return 0;
+		}
+		break;
+
+	/* Non-periodic state groups */
+	case FIQ_NP_SSPLIT_STARTED:
+	case FIQ_NP_SSPLIT_RETRY:
+		/* Got a HCINT for a NP SSPLIT. Expected ACK / NAK / fail */
+		if (hcint.b.ack) {
+			/* SSPLIT complete. For OUT, the data has been sent. For IN, the LS transaction
+			 * will start shortly. SOF needs to kick the transaction to prevent a NYET flood. 
+			 */
+			if(st->hcchar_copy.b.epdir == 1)
+				st->fsm = FIQ_NP_IN_CSPLIT_RETRY;
+			else
+				st->fsm = FIQ_NP_OUT_CSPLIT_RETRY;
+			st->nr_errors = 0;
+			handled = 1;
+			fiq_fsm_setup_csplit(state, n);
+		} else if (hcint.b.nak) {
+			// No buffer space in TT. Retry on a uframe boundary.
+			st->fsm = FIQ_NP_SSPLIT_RETRY;
+			handled = 1;
+		} else if (hcint.b.xacterr) {
+			// The only other one we care about is xacterr. This implies HS bus error - retry.
+			st->nr_errors++;
+			st->fsm = FIQ_NP_SSPLIT_RETRY;
+			if (st->nr_errors >= 3) {
+				st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
+			} else {
+				handled = 1;
+				restart = 1;
+			}
+		} else {
+			st->fsm = FIQ_NP_SPLIT_LS_ABORTED;
+			handled = 0;
+			restart = 0;
+		}
+		break;
+		
+	case FIQ_NP_IN_CSPLIT_RETRY:
+		/* Received a CSPLIT done interrupt.
+		 * Expected Data/NAK/STALL/NYET for IN. 
+		 */
+		if (hcint.b.xfercomp) {
+			/* For IN, data is present. */
+			st->fsm = FIQ_NP_SPLIT_DONE;
+		} else if (hcint.b.nak) {
+			/* no endpoint data. Punt it upstairs */
+			st->fsm = FIQ_NP_SPLIT_DONE;
+		} else if (hcint.b.nyet) {
+			/* CSPLIT NYET - retry on a uframe boundary. */
+			handled = 1;
+			st->nr_errors = 0;
+		} else if (hcint.b.datatglerr) {
+			/* data toggle errors do not set the xfercomp bit. */
+			st->fsm = FIQ_NP_SPLIT_LS_ABORTED;
+		} else if (hcint.b.xacterr) {
+			/* HS error. Retry immediate */
+			st->fsm = FIQ_NP_IN_CSPLIT_RETRY;
+			st->nr_errors++;
+			if (st->nr_errors >= 3) {
+				st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
+			} else {
+				handled = 1;
+				restart = 1;
+			}
+		} else if (hcint.b.stall || hcint.b.bblerr) {
+			/* A STALL implies either a LS bus error or a genuine STALL. */
+			st->fsm = FIQ_NP_SPLIT_LS_ABORTED;
+		} else {
+			/*  Hardware bug. It's possible in some cases to
+			 *  get a channel halt with nothing else set when
+			 *  the response was a NYET. Treat as local 3-strikes retry. 
+			 */
+			hcint_data_t hcint_test = hcint;
+			hcint_test.b.chhltd = 0;
+			if (!hcint_test.d32) {
+				st->nr_errors++;
+				if (st->nr_errors >= 3) {
+					st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
+				} else {
+					handled = 1;
+				}
+			} else {
+				/* Bail out if something unexpected happened */
+				st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
+			}
+		}
+		break;
+	
+	case FIQ_NP_OUT_CSPLIT_RETRY:
+		/* Received a CSPLIT done interrupt.
+		 * Expected ACK/NAK/STALL/NYET/XFERCOMP for OUT.*/
+		if (hcint.b.xfercomp) {
+			st->fsm = FIQ_NP_SPLIT_DONE;
+		} else if (hcint.b.nak) {
+			// The HCD will implement the holdoff on frame boundaries.
+			st->fsm = FIQ_NP_SPLIT_DONE;
+		} else if (hcint.b.nyet) {
+			// Hub still processing.
+			st->fsm = FIQ_NP_OUT_CSPLIT_RETRY;
+			handled = 1;
+			st->nr_errors = 0;
+			//restart = 1;
+		} else if (hcint.b.xacterr) { 
+			/* HS error. retry immediate */
+			st->fsm = FIQ_NP_OUT_CSPLIT_RETRY;
+			st->nr_errors++;
+			if (st->nr_errors >= 3) {
+				st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
+			} else {
+				handled = 1;
+				restart = 1;
+			}
+		} else if (hcint.b.stall) { 
+			/* LS bus error or genuine stall */
+			st->fsm = FIQ_NP_SPLIT_LS_ABORTED;
+		} else {
+			/* 
+			 * Hardware bug. It's possible in some cases to get a
+			 * channel halt with nothing else set when the response was a NYET.
+			 * Treat as local 3-strikes retry.
+			 */
+			hcint_data_t hcint_test = hcint;
+			hcint_test.b.chhltd = 0;
+			if (!hcint_test.d32) {
+				st->nr_errors++;
+				if (st->nr_errors >= 3) {
+					st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
+				} else {
+					handled = 1;
+				}
+			} else {
+				// Something unexpected happened. AHBerror or babble perhaps. Let the IRQ deal with it.
+				st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
+			}
+		}
+		break;
+	
+	/* Periodic split states (except isoc out) */
+	case FIQ_PER_SSPLIT_STARTED:
+		/* Expect an ACK or failure for SSPLIT */
+		if (hcint.b.ack) {
+			/*
+			 * SSPLIT transfer complete interrupt - the generation of this interrupt is fraught with bugs.
+			 * For a packet queued in microframe n-3 to appear in n-2, if the channel is enabled near the EOF1
+			 * point for microframe n-3, the packet will not appear on the bus until microframe n.
+			 * Additionally, the generation of the actual interrupt is dodgy. For a packet appearing on the bus
+			 * in microframe n, sometimes the interrupt is generated immediately. Sometimes, it appears in n+1
+			 * coincident with SOF for n+1.
+			 * SOF is also buggy. It can sometimes be raised AFTER the first bus transaction has taken place.
+			 * These appear to be caused by timing/clock crossing bugs within the core itself.
+			 * State machine workaround.
+			 */
+			hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM);
+			hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR);
+			fiq_fsm_setup_csplit(state, n);
+			/* Poke the oddfrm bit. If we are equivalent, we received the interrupt at the correct
+			 * time. If not, then we're in the next SOF.
+			 */
+			if ((hfnum.b.frnum & 0x1) == hcchar.b.oddfrm) {
+				fiq_print(FIQDBG_INT, state, "CSWAIT %01d", n);
+				st->expected_uframe = hfnum.b.frnum;
+				st->fsm = FIQ_PER_CSPLIT_WAIT;
+			} else {
+				fiq_print(FIQDBG_INT, state, "CSPOL  %01d", n);
+				/* For isochronous IN endpoints,
+				 * we need to hold off if we are expecting a lot of data */
+				if (st->hcchar_copy.b.mps < DATA0_PID_HEURISTIC) {
+					start_next_periodic = 1;
+				}
+				/* Danger will robinson: we are in a broken state. If our first interrupt after
+				 * this is a NYET, it will be delayed by 1 uframe and result in an unrecoverable
+				 * lag. Unmask the NYET interrupt. 
+				 */
+				st->expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF;
+				st->fsm = FIQ_PER_CSPLIT_BROKEN_NYET1;
+				restart = 1;
+			}
+			handled = 1;
+		} else if (hcint.b.xacterr) {
+			/* 3-strikes retry is enabled, we have hit our max nr_errors */
+			st->fsm = FIQ_PER_SPLIT_HS_ABORTED;
+			start_next_periodic = 1;
+		} else {
+			st->fsm = FIQ_PER_SPLIT_HS_ABORTED;
+			start_next_periodic = 1;
+		}
+		/* We can now queue the next isochronous OUT transaction, if one is pending. */
+		if(fiq_fsm_tt_next_isoc(state, num_channels, n)) {
+			fiq_print(FIQDBG_INT, state, "NEXTISO ");
+		}
+		break;
+		
+	case FIQ_PER_CSPLIT_NYET1:
+		/* First CSPLIT attempt was a NYET. If we get a subsequent NYET,
+		 * we are too late and the TT has dropped its CSPLIT fifo.
+		 */
+		hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM);
+		hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR);
+		start_next_periodic = 1;
+		if (hcint.b.nak) {
+			st->fsm = FIQ_PER_SPLIT_DONE;
+		} else if (hcint.b.xfercomp) {
+			fiq_increment_dma_buf(state, num_channels, n);
+			st->fsm = FIQ_PER_CSPLIT_POLL;
+			st->nr_errors = 0;
+			if (fiq_fsm_more_csplits(state, n, &last_csplit)) {
+				handled = 1;
+				restart = 1;
+				if (!last_csplit)
+					start_next_periodic = 0;
+			} else {
+				st->fsm = FIQ_PER_SPLIT_DONE;
+			}
+		} else if (hcint.b.nyet) {
+			/* Doh. Data lost. */
+			st->fsm = FIQ_PER_SPLIT_NYET_ABORTED;
+		} else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) {
+			st->fsm = FIQ_PER_SPLIT_LS_ABORTED;
+		} else {
+			st->fsm = FIQ_PER_SPLIT_HS_ABORTED;
+		}
+		break;
+		
+	case FIQ_PER_CSPLIT_BROKEN_NYET1:
+		/* 
+		 * we got here because our host channel is in the delayed-interrupt
+		 * state and we cannot take a NYET interrupt any later than when it
+		 * occurred. Disable then re-enable the channel if this happens to force
+		 * CSPLITs to occur at the right time. 
+		 */
+		hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM);
+		hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR);
+		fiq_print(FIQDBG_INT, state, "BROK: %01d ", n);
+		if (hcint.b.nak) {
+			st->fsm = FIQ_PER_SPLIT_DONE;
+			start_next_periodic = 1;
+		} else if (hcint.b.xfercomp) {
+			fiq_increment_dma_buf(state, num_channels, n);
+			if (fiq_fsm_more_csplits(state, n, &last_csplit)) {
+				st->fsm = FIQ_PER_CSPLIT_POLL;
+				handled = 1;
+				restart = 1;
+				start_next_periodic = 1;
+				/* Reload HCTSIZ for the next transfer */
+				fiq_fsm_reload_hctsiz(state, n);
+				if (!last_csplit)
+					start_next_periodic = 0;
+			} else {
+				st->fsm = FIQ_PER_SPLIT_DONE;
+			}
+		} else if (hcint.b.nyet) {
+			st->fsm = FIQ_PER_SPLIT_NYET_ABORTED;
+			start_next_periodic = 1;
+		} else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) {
+			/* Local 3-strikes retry is handled by the core. This is a ERR response.*/
+			st->fsm = FIQ_PER_SPLIT_LS_ABORTED;
+		} else {
+			st->fsm = FIQ_PER_SPLIT_HS_ABORTED;
+		}
+		break;
+	
+	case FIQ_PER_CSPLIT_POLL:
+		hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM);
+		hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR);
+		start_next_periodic = 1;
+		if (hcint.b.nak) {
+			st->fsm = FIQ_PER_SPLIT_DONE;
+		} else if (hcint.b.xfercomp) {
+			fiq_increment_dma_buf(state, num_channels, n);
+			if (fiq_fsm_more_csplits(state, n, &last_csplit)) {
+				handled = 1;
+				restart = 1;
+				/* Reload HCTSIZ for the next transfer */
+				fiq_fsm_reload_hctsiz(state, n);
+				if (!last_csplit)
+					start_next_periodic = 0;
+			} else {
+				st->fsm = FIQ_PER_SPLIT_DONE;
+			}
+		} else if (hcint.b.nyet) {
+			/* Are we a NYET after the first data packet? */
+			if (st->nrpackets == 0) {
+				st->fsm = FIQ_PER_CSPLIT_NYET1;
+				handled = 1;
+				restart = 1;
+			} else {
+				/* We got a NYET when polling CSPLITs. Can happen
+				 * if our heuristic fails, or if someone disables us
+				 * for any significant length of time.
+				 */
+				if (st->nr_errors >= 3) {
+					st->fsm = FIQ_PER_SPLIT_NYET_ABORTED;
+				} else {
+					st->fsm = FIQ_PER_SPLIT_DONE;
+				}
+			}
+		} else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) {
+			/* For xacterr, Local 3-strikes retry is handled by the core. This is a ERR response.*/
+			st->fsm = FIQ_PER_SPLIT_LS_ABORTED;
+		} else {
+			st->fsm = FIQ_PER_SPLIT_HS_ABORTED;
+		}
+		break;
+	
+	case FIQ_HS_ISOC_TURBO:
+		if (fiq_fsm_update_hs_isoc(state, n, hcint)) {
+			/* more transactions to come */
+			handled = 1;
+			restart = 1;
+			fiq_print(FIQDBG_INT, state, "HSISO M ");
+		} else {
+			st->fsm = FIQ_HS_ISOC_DONE;
+			fiq_print(FIQDBG_INT, state, "HSISO F ");
+		}
+		break;
+
+	case FIQ_HS_ISOC_ABORTED:
+		/* This abort is called by the driver rewriting the state mid-transaction
+		 * which allows the dequeue mechanism to work more effectively.
+		 */
+		break;
+
+	case FIQ_PER_ISO_OUT_ACTIVE:
+		if (hcint.b.ack) {
+			if(fiq_iso_out_advance(state, num_channels, n)) {
+				/* last OUT transfer */
+				st->fsm = FIQ_PER_ISO_OUT_LAST;
+				/*
+				 * Assuming the periodic FIFO in the dwc core
+				 * actually does its job properly, we can queue
+				 * the next ssplit now and in theory, the wire
+				 * transactions will be in-order.
+				 */
+				// No it doesn't. It appears to process requests in host channel order.
+				//start_next_periodic = 1;
+			}
+			handled = 1;
+			restart = 1;
+		} else {
+			/*
+			 * Isochronous transactions carry on regardless. Log the error
+			 * and continue.
+			 */
+			//explode += 1;
+			st->nr_errors++;
+			if(fiq_iso_out_advance(state, num_channels, n)) {
+				st->fsm = FIQ_PER_ISO_OUT_LAST;
+				//start_next_periodic = 1;
+			}
+			handled = 1;
+			restart = 1;
+		}
+		break;
+	
+	case FIQ_PER_ISO_OUT_LAST:
+		if (hcint.b.ack) {
+			/* All done here */
+			st->fsm = FIQ_PER_ISO_OUT_DONE;
+		} else {
+			st->fsm = FIQ_PER_ISO_OUT_DONE;
+			st->nr_errors++;
+		}
+		start_next_periodic = 1;
+		break;
+
+	case FIQ_PER_SPLIT_TIMEOUT:
+		/* SOF kicked us because we overran. */
+		start_next_periodic = 1;
+		break;
+
+	default:
+		break;
+	}
+
+	if (handled) {
+		FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT, hcint.d32);
+	} else {
+		/* Copy the regs into the state so the IRQ knows what to do */
+		st->hcint_copy.d32 = hcint.d32;
+	}
+
+	if (restart) {
+		/* Restart always implies handled. */
+		if (restart == 2) {
+			/* For complete-split INs, the show must go on.
+			 * Force a channel restart */
+			fiq_fsm_restart_channel(state, n, 1);
+		} else {
+			fiq_fsm_restart_channel(state, n, 0);
+		}
+	}
+	if (start_next_periodic) {
+		fiq_fsm_start_next_periodic(state, num_channels);
+	}
+	if (st->fsm != FIQ_PASSTHROUGH)
+		fiq_print(FIQDBG_INT, state, "FSMOUT%02d", st->fsm);
+
+	return handled;
+}
+
+
+/**
+ * dwc_otg_fiq_fsm() - Flying State Machine (monster) FIQ
+ * @state:		pointer to state struct passed from the banked FIQ mode registers.
+ * @num_channels:	set according to the DWC hardware configuration
+ * @dma:		pointer to DMA bounce buffers for split transaction slots
+ *
+ * The FSM FIQ performs the low-level tasks that normally would be performed by the microcode
+ * inside an EHCI or similar host controller regarding split transactions. The DWC core
+ * interrupts each and every time a split transaction packet is received or sent successfully.
+ * This results in either an interrupt storm when everything is working "properly", or
+ * the interrupt latency of the system in general breaks time-sensitive periodic split
+ * transactions. Pushing the low-level, but relatively easy state machine work into the FIQ
+ * solves these problems.
+ *
+ * Return: void
+ */
+void notrace dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels)
+{
+	gintsts_data_t gintsts, gintsts_handled;
+	gintmsk_data_t gintmsk;
+	//hfnum_data_t hfnum;
+	haint_data_t haint, haint_handled;
+	haintmsk_data_t haintmsk;
+	int kick_irq = 0;
+
+	gintsts_handled.d32 = 0;
+	haint_handled.d32 = 0;
+
+	gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS);
+	gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK);
+	gintsts.d32 &= gintmsk.d32;
+
+	if (gintsts.b.sofintr) {
+		/* For FSM mode, SOF is required to keep the state machine advance for
+		 * certain stages of the periodic pipeline. It's death to mask this
+		 * interrupt in that case.
+		 */
+
+		if (!fiq_fsm_do_sof(state, num_channels)) {
+			/* Kick IRQ once. Queue advancement means that all pending transactions
+			 * will get serviced when the IRQ finally executes.
+			 */
+			if (state->gintmsk_saved.b.sofintr == 1)
+				kick_irq |= 1;
+			state->gintmsk_saved.b.sofintr = 0;	
+		}
+		gintsts_handled.b.sofintr = 1;
+	}
+
+	if (gintsts.b.hcintr) {
+		int i;
+		haint.d32 = FIQ_READ(state->dwc_regs_base + HAINT);
+		haintmsk.d32 = FIQ_READ(state->dwc_regs_base + HAINTMSK);
+		haint.d32 &= haintmsk.d32;
+		haint_handled.d32 = 0;
+		for (i=0; i<num_channels; i++) {
+			if (haint.b2.chint & (1 << i)) {
+				if(!fiq_fsm_do_hcintr(state, num_channels, i)) {
+					/* HCINT was not handled in FIQ
+					 * HAINT is level-sensitive, leading to level-sensitive ginststs.b.hcint bit.
+					 * Mask HAINT(i) but keep top-level hcint unmasked.
+					 */
+					state->haintmsk_saved.b2.chint &= ~(1 << i);
+				} else {
+					/* do_hcintr cleaned up after itself, but clear haint */
+					haint_handled.b2.chint |= (1 << i);
+				}
+			}
+		}
+		
+		if (haint_handled.b2.chint) {
+			FIQ_WRITE(state->dwc_regs_base + HAINT, haint_handled.d32);
+		}
+
+		if (haintmsk.d32 != (haintmsk.d32 & state->haintmsk_saved.d32)) {
+			/*
+			 * This is necessary to avoid multiple retriggers of the MPHI in the case
+			 * where interrupts are held off and HCINTs start to pile up.
+			 * Only wake up the IRQ if a new interrupt came in, was not handled and was
+			 * masked.
+			 */
+			haintmsk.d32 &= state->haintmsk_saved.d32;
+			FIQ_WRITE(state->dwc_regs_base + HAINTMSK, haintmsk.d32);
+			kick_irq |= 1;
+		}
+		/* Top-Level interrupt - always handled because it's level-sensitive */
+		gintsts_handled.b.hcintr = 1;
+	}
+
+
+	/* Clear the bits in the saved register that were not handled but were triggered. */
+	state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32);
+
+	/* FIQ didn't handle something - mask has changed - write new mask */
+	if (gintmsk.d32 != (gintmsk.d32 & state->gintmsk_saved.d32)) {
+		gintmsk.d32 &= state->gintmsk_saved.d32;
+		gintmsk.b.sofintr = 1;
+		FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32);
+//		fiq_print(FIQDBG_INT, state, "KICKGINT");
+//		fiq_print(FIQDBG_INT, state, "%08x", gintmsk.d32);
+//		fiq_print(FIQDBG_INT, state, "%08x", state->gintmsk_saved.d32);
+		kick_irq |= 1;
+	}
+
+	if (gintsts_handled.d32) {
+		/* Only applies to edge-sensitive bits in GINTSTS */
+		FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32);
+	}
+
+	/* We got an interrupt, didn't handle it. */
+	if (kick_irq) {
+		state->mphi_int_count++;
+		FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send);
+		FIQ_WRITE(state->mphi_regs.outddb, (1<<29));
+
+	}
+	state->fiq_done++;
+	mb();
+}
+
+
+/**
+ * dwc_otg_fiq_nop() - FIQ "lite"
+ * @state:	pointer to state struct passed from the banked FIQ mode registers.
+ *
+ * The "nop" handler does not intervene on any interrupts other than SOF.
+ * It is limited in scope to deciding at each SOF if the IRQ SOF handler (which deals
+ * with non-periodic/periodic queues) needs to be kicked.
+ *
+ * This is done to hold off the SOF interrupt, which occurs at a rate of 8000 per second.
+ *
+ * Return: void
+ */
+void notrace dwc_otg_fiq_nop(struct fiq_state *state)
+{
+	gintsts_data_t gintsts, gintsts_handled;
+	gintmsk_data_t gintmsk;
+	hfnum_data_t hfnum;
+
+	hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM);
+	gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS);
+	gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK);
+	gintsts.d32 &= gintmsk.d32;
+	gintsts_handled.d32 = 0;
+
+	if (gintsts.b.sofintr) {
+		if (!state->kick_np_queues &&
+				dwc_frame_num_gt(state->next_sched_frame, hfnum.b.frnum)) {
+			/* SOF handled, no work to do, just ACK interrupt */
+			gintsts_handled.b.sofintr = 1;
+		} else {
+			/* Kick IRQ */
+			state->gintmsk_saved.b.sofintr = 0;
+		}
+	}
+
+	/* Reset handled interrupts */
+	if(gintsts_handled.d32) {
+		FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32);
+	}
+
+	/* Clear the bits in the saved register that were not handled but were triggered. */
+	state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32);
+
+	/* We got an interrupt, didn't handle it and want to mask it */
+	if (~(state->gintmsk_saved.d32)) {
+		state->mphi_int_count++;
+		gintmsk.d32 &= state->gintmsk_saved.d32;
+		FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32);
+		/* Force a clear before another dummy send */
+		FIQ_WRITE(state->mphi_regs.intstat, (1<<29));
+		FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send);
+		FIQ_WRITE(state->mphi_regs.outddb, (1<<29));
+
+	}
+	state->fiq_done++;
+	mb();
+}
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h
new file mode 100644
index 0000000..7572958
--- /dev/null
+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h
@@ -0,0 +1,353 @@
+/*
+ * dwc_otg_fiq_fsm.h - Finite state machine FIQ header definitions
+ *
+ * Copyright (c) 2013 Raspberry Pi Foundation
+ *
+ * Author: Jonathan Bell <jonathan@raspberrypi.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *	* Redistributions of source code must retain the above copyright
+ *	  notice, this list of conditions and the following disclaimer.
+ *	* Redistributions in binary form must reproduce the above copyright
+ *	  notice, this list of conditions and the following disclaimer in the
+ *	  documentation and/or other materials provided with the distribution.
+ *	* Neither the name of Raspberry Pi nor the
+ *	  names of its contributors may be used to endorse or promote products
+ *	  derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This FIQ implements functionality that performs split transactions on
+ * the dwc_otg hardware without any outside intervention. A split transaction
+ * is "queued" by nominating a specific host channel to perform the entirety
+ * of a split transaction. This FIQ will then perform the microframe-precise
+ * scheduling required in each phase of the transaction until completion.
+ *
+ * The FIQ functionality has been surgically implanted into the Synopsys
+ * vendor-provided driver.
+ *
+ */
+
+#ifndef DWC_OTG_FIQ_FSM_H_
+#define DWC_OTG_FIQ_FSM_H_
+
+#include "dwc_otg_regs.h"
+#include "dwc_otg_cil.h"
+#include "dwc_otg_hcd.h"
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+#include <linux/string.h>
+#include <asm/barrier.h>
+
+#if 0
+#define FLAME_ON(x)					\
+do {							\
+	int gpioreg;                                    \
+							\
+	gpioreg = readl(__io_address(0x20200000+0x8));	\
+	gpioreg &= ~(7 << (x-20)*3);			\
+	gpioreg |= 0x1 << (x-20)*3;			\
+	writel(gpioreg, __io_address(0x20200000+0x8));	\
+							\
+	writel(1<<x, __io_address(0x20200000+(0x1C)));	\
+} while (0)
+
+#define FLAME_OFF(x)					\
+do {							\
+	writel(1<<x, __io_address(0x20200000+(0x28)));	\
+} while (0)
+#else 
+#define FLAME_ON(x) do { } while (0)
+#define FLAME_OFF(X) do { } while (0)
+#endif 
+
+/* This is a quick-and-dirty arch-specific register read/write. We know that
+ * writes to a peripheral on BCM2835 will always arrive in-order, also that
+ * reads and writes are executed in-order therefore the need for memory barriers 
+ * is obviated if we're only talking to USB.
+ */
+#define FIQ_WRITE(_addr_,_data_) (*(volatile unsigned int *) (_addr_) = (_data_))
+#define FIQ_READ(_addr_) (*(volatile unsigned int *) (_addr_))
+
+/* FIQ-ified register definitions. Offsets are from dwc_regs_base. */
+#define GINTSTS		0x014
+#define GINTMSK		0x018
+/* Debug register. Poll the top of the received packets FIFO. */
+#define GRXSTSR		0x01C
+#define HFNUM		0x408
+#define HAINT		0x414
+#define HAINTMSK	0x418
+#define HPRT0		0x440
+
+/* HC_regs start from an offset of 0x500 */
+#define HC_START	0x500
+#define HC_OFFSET	0x020
+
+#define HC_DMA		0x514
+
+#define HCCHAR		0x00
+#define HCSPLT		0x04
+#define HCINT		0x08
+#define HCINTMSK	0x0C
+#define HCTSIZ		0x10
+
+#define ISOC_XACTPOS_ALL 	0b11
+#define ISOC_XACTPOS_BEGIN	0b10
+#define ISOC_XACTPOS_MID	0b00
+#define ISOC_XACTPOS_END	0b01
+
+#define DWC_PID_DATA2	0b01
+#define DWC_PID_MDATA	0b11
+#define DWC_PID_DATA1	0b10
+#define DWC_PID_DATA0	0b00
+
+typedef struct {
+	volatile void* base;
+	volatile void* ctrl;
+	volatile void* outdda;
+	volatile void* outddb;
+	volatile void* intstat;
+} mphi_regs_t;
+
+
+enum fiq_debug_level {
+	FIQDBG_SCHED = (1 << 0),
+	FIQDBG_INT   = (1 << 1),
+	FIQDBG_ERR   = (1 << 2),
+	FIQDBG_PORTHUB = (1 << 3),
+};
+
+struct fiq_state;
+
+extern void _fiq_print (enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...);
+#if 0
+#define fiq_print _fiq_print
+#else
+#define fiq_print(x, y, ...)
+#endif
+
+extern bool fiq_enable, fiq_fsm_enable;
+extern ushort nak_holdoff;
+
+/**
+ * enum fiq_fsm_state - The FIQ FSM states.
+ *
+ * This is the "core" of the FIQ FSM. Broadly, the FSM states follow the
+ * USB2.0 specification for host responses to various transaction states.
+ * There are modifications to this host state machine because of a variety of
+ * quirks and limitations in the dwc_otg hardware.
+ *
+ * The fsm state is also used to communicate back to the driver on completion of
+ * a split transaction. The end states are used in conjunction with the interrupts
+ * raised by the final transaction.
+ */
+enum fiq_fsm_state {
+	/* FIQ isn't enabled for this host channel */
+	FIQ_PASSTHROUGH = 0,
+	/* For the first interrupt received for this channel,
+	 * the FIQ has to ack any interrupts indicating success. */
+	FIQ_PASSTHROUGH_ERRORSTATE = 31,
+	/* Nonperiodic state groups */
+	FIQ_NP_SSPLIT_STARTED = 1,
+	FIQ_NP_SSPLIT_RETRY = 2,
+	FIQ_NP_OUT_CSPLIT_RETRY = 3,
+	FIQ_NP_IN_CSPLIT_RETRY = 4,
+	FIQ_NP_SPLIT_DONE = 5,
+	FIQ_NP_SPLIT_LS_ABORTED = 6,
+	/* This differentiates a HS transaction error from a LS one
+	 * (handling the hub state is different) */
+	FIQ_NP_SPLIT_HS_ABORTED = 7,
+
+	/* Periodic state groups */
+	/* Periodic transactions are either started directly by the IRQ handler
+	 * or deferred if the TT is already in use.
+	 */
+	FIQ_PER_SSPLIT_QUEUED = 8,
+	FIQ_PER_SSPLIT_STARTED = 9,
+	FIQ_PER_SSPLIT_LAST = 10,
+	
+	
+	FIQ_PER_ISO_OUT_PENDING = 11,
+	FIQ_PER_ISO_OUT_ACTIVE = 12,
+	FIQ_PER_ISO_OUT_LAST = 13,
+	FIQ_PER_ISO_OUT_DONE = 27,
+
+	FIQ_PER_CSPLIT_WAIT = 14,
+	FIQ_PER_CSPLIT_NYET1 = 15,
+	FIQ_PER_CSPLIT_BROKEN_NYET1 = 28,
+	FIQ_PER_CSPLIT_NYET_FAFF = 29,
+	/* For multiple CSPLITs (large isoc IN, or delayed interrupt) */
+	FIQ_PER_CSPLIT_POLL = 16,
+	/* The last CSPLIT for a transaction has been issued, differentiates
+	 * for the state machine to queue the next packet.
+	 */
+	FIQ_PER_CSPLIT_LAST = 17,
+
+	FIQ_PER_SPLIT_DONE = 18,
+	FIQ_PER_SPLIT_LS_ABORTED = 19,
+	FIQ_PER_SPLIT_HS_ABORTED = 20,
+	FIQ_PER_SPLIT_NYET_ABORTED = 21,
+	/* Frame rollover has occurred without the transaction finishing. */
+	FIQ_PER_SPLIT_TIMEOUT = 22,
+	
+	/* FIQ-accelerated HS Isochronous state groups */
+	FIQ_HS_ISOC_TURBO = 23,
+	/* For interval > 1, SOF wakes up the isochronous FSM */
+	FIQ_HS_ISOC_SLEEPING = 24,
+	FIQ_HS_ISOC_DONE = 25,
+	FIQ_HS_ISOC_ABORTED = 26,
+	FIQ_DEQUEUE_ISSUED = 30,
+	FIQ_TEST = 32,
+};
+
+struct fiq_stack {
+	int magic1;
+	uint8_t stack[2048];
+	int magic2;
+};
+
+
+/**
+ * struct fiq_dma_info - DMA bounce buffer utilisation information (per-channel)
+ * @index:	Number of slots reported used for IN transactions / number of slots
+ *			transmitted for an OUT transaction
+ * @slot_len[6]: Number of actual transfer bytes in each slot (255 if unused)
+ *
+ * Split transaction transfers can have variable length depending on other bus
+ * traffic. The OTG core DMA engine requires 4-byte aligned addresses therefore
+ * each transaction needs a guaranteed aligned address. A maximum of 6 split transfers
+ * can happen per-frame.
+ */
+struct fiq_dma_info {
+	u8 index;
+	u8 slot_len[6];
+};
+
+struct __attribute__((packed)) fiq_split_dma_slot {
+	u8 buf[188];
+};
+
+struct fiq_dma_channel {
+	struct __attribute__((packed)) fiq_split_dma_slot index[6];
+};
+
+struct fiq_dma_blob {
+	struct __attribute__((packed)) fiq_dma_channel channel[0];
+};
+
+/**
+ * struct fiq_hs_isoc_info - USB2.0 isochronous data
+ * @iso_frame:	Pointer to the array of OTG URB iso_frame_descs.
+ * @nrframes:	Total length of iso_frame_desc array
+ * @index:	Current index (FIQ-maintained)
+ *
+ */
+struct fiq_hs_isoc_info {
+	struct dwc_otg_hcd_iso_packet_desc *iso_desc;
+	unsigned int nrframes;
+	unsigned int index;
+};
+
+/**
+ * struct fiq_channel_state - FIQ state machine storage
+ * @fsm:	Current state of the channel as understood by the FIQ
+ * @nr_errors:	Number of transaction errors on this split-transaction
+ * @hub_addr:   SSPLIT/CSPLIT destination hub
+ * @port_addr:  SSPLIT/CSPLIT destination port - always 1 if single TT hub
+ * @nrpackets:  For isoc OUT, the number of split-OUT packets to transmit. For
+ * 		split-IN, number of CSPLIT data packets that were received.
+ * @hcchar_copy:
+ * @hcsplt_copy:
+ * @hcintmsk_copy:
+ * @hctsiz_copy:	Copies of the host channel registers.
+ * 			For use as scratch, or for returning state.
+ *
+ * The fiq_channel_state is state storage between interrupts for a host channel. The
+ * FSM state is stored here. Members of this structure must only be set up by the
+ * driver prior to enabling the FIQ for this host channel, and not touched until the FIQ
+ * has updated the state to either a COMPLETE state group or ABORT state group.
+ */
+
+struct fiq_channel_state {
+	enum fiq_fsm_state fsm;
+	unsigned int nr_errors;
+	unsigned int hub_addr;
+	unsigned int port_addr;
+	/* Hardware bug workaround: sometimes channel halt interrupts are
+	 * delayed until the next SOF. Keep track of when we expected to get interrupted. */
+	unsigned int expected_uframe; 
+	/* in/out for communicating number of dma buffers used, or number of ISOC to do */
+	unsigned int nrpackets;
+	struct fiq_dma_info dma_info;
+	struct fiq_hs_isoc_info hs_isoc_info;
+	/* Copies of HC registers - in/out communication from/to IRQ handler
+	 * and for ease of channel setup. A bit of mungeing is performed - for
+	 * example the hctsiz.b.maxp is _always_ the max packet size of the endpoint. 
+	 */
+	hcchar_data_t hcchar_copy;
+	hcsplt_data_t hcsplt_copy;
+	hcint_data_t hcint_copy;
+	hcintmsk_data_t hcintmsk_copy;
+	hctsiz_data_t hctsiz_copy;
+	hcdma_data_t hcdma_copy;
+};
+
+/**
+ * struct fiq_state - top-level FIQ state machine storage
+ * @mphi_regs:		virtual address of the MPHI peripheral register file
+ * @dwc_regs_base:	virtual address of the base of the DWC core register file
+ * @dma_base:		physical address for the base of the DMA bounce buffers
+ * @dummy_send:		Scratch area for sending a fake message to the MPHI peripheral
+ * @gintmsk_saved:	Top-level mask of interrupts that the FIQ has not handled.
+ * 			Used for determining which interrupts fired to set off the IRQ handler.
+ * @haintmsk_saved:	Mask of interrupts from host channels that the FIQ did not handle internally.
+ * @np_count:		Non-periodic transactions in the active queue
+ * @np_sent:		Count of non-periodic transactions that have completed
+ * @next_sched_frame:	For periodic transactions handled by the driver's SOF-driven queuing mechanism,
+ * 			this is the next frame on which a SOF interrupt is required. Used to hold off
+ * 			passing SOF through to the driver until necessary.
+ * @channel[n]:		Per-channel FIQ state. Allocated during init depending on the number of host
+ * 			channels configured into the core logic.
+ *
+ * This is passed as the first argument to the dwc_otg_fiq_fsm top-level FIQ handler from the asm stub.
+ * It contains top-level state information.
+ */
+struct fiq_state {
+	mphi_regs_t mphi_regs;
+	void *dwc_regs_base;
+	dma_addr_t dma_base;
+	struct fiq_dma_blob *fiq_dmab;
+	void *dummy_send;
+	gintmsk_data_t gintmsk_saved;
+	haintmsk_data_t haintmsk_saved;
+	int mphi_int_count;
+	unsigned int fiq_done;
+	unsigned int kick_np_queues;
+	unsigned int next_sched_frame;
+#ifdef FIQ_DEBUG
+	char * buffer;
+	unsigned int bufsiz;
+#endif
+	struct fiq_channel_state channel[0];
+};
+
+extern int fiq_fsm_too_late(struct fiq_state *st, int n);
+
+extern int fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n);
+
+extern void dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels);
+
+extern void dwc_otg_fiq_nop(struct fiq_state *state);
+
+#endif /* DWC_OTG_FIQ_FSM_H_ */
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S b/drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S
new file mode 100644
index 0000000..8cfe364
--- /dev/null
+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S
@@ -0,0 +1,81 @@
+/*
+ * dwc_otg_fiq_fsm.S - assembly stub for the FSM FIQ
+ *
+ * Copyright (c) 2013 Raspberry Pi Foundation
+ *
+ * Author: Jonathan Bell <jonathan@raspberrypi.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *	* Redistributions of source code must retain the above copyright
+ *	  notice, this list of conditions and the following disclaimer.
+ *	* Redistributions in binary form must reproduce the above copyright
+ *	  notice, this list of conditions and the following disclaimer in the
+ *	  documentation and/or other materials provided with the distribution.
+ *	* Neither the name of Raspberry Pi nor the
+ *	  names of its contributors may be used to endorse or promote products
+ *	  derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+#include <asm/assembler.h>
+#include <linux/linkage.h>
+
+
+.text
+
+.global _dwc_otg_fiq_stub_end;
+
+/**
+  * _dwc_otg_fiq_stub() - entry copied to the FIQ vector page to allow
+  * a C-style function call with arguments from the FIQ banked registers.
+  * r0 = &hcd->fiq_state
+  * r1 = &hcd->num_channels
+  * r2 = &hcd->dma_buffers
+  * Tramples: r0, r1, r2, r4, fp, ip
+  */
+
+ENTRY(_dwc_otg_fiq_stub)
+	/* Stash unbanked regs - SP will have been set up for us */
+	mov ip, sp;
+	stmdb sp!, {r0-r12, lr};
+#ifdef FIQ_DEBUG
+	// Cycle profiling - read cycle counter at start
+	mrc p15, 0, r5, c15, c12, 1;
+#endif
+	/* r11 = fp, don't trample it */
+	mov r4, fp;
+	/* set EABI frame size */
+	sub fp, ip, #512;
+
+	/* for fiq NOP mode - just need state */
+	mov r0, r8;
+	/* r9 = num_channels */
+	mov r1, r9;
+	/* r10 = struct *dma_bufs */
+//	mov r2, r10;
+
+	/* r4 = &fiq_c_function */
+	blx r4;
+#ifdef FIQ_DEBUG
+	mrc p15, 0, r4, c15, c12, 1;
+	subs r5, r5, r4;
+	// r5 is now the cycle count time for executing the FIQ. Store it somewhere?
+#endif
+	ldmia sp!, {r0-r12, lr};
+	subs pc, lr, #4;
+_dwc_otg_fiq_stub_end:
+END(_dwc_otg_fiq_stub)
+
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
index 22300f0..daea770 100644
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
@@ -45,9 +45,10 @@
 
 #include "dwc_otg_hcd.h"
 #include "dwc_otg_regs.h"
-#include "dwc_otg_mphi_fix.h"
+#include "dwc_otg_fiq_fsm.h"
 
-extern bool microframe_schedule, nak_holdoff_enable;
+extern bool microframe_schedule;
+extern uint16_t fiq_fsm_mask, nak_holdoff;
 
 //#define DEBUG_HOST_CHANNELS
 #ifdef DEBUG_HOST_CHANNELS
@@ -57,12 +58,6 @@ static int last_sel_trans_num_avail_hc_at_start = 0;
 static int last_sel_trans_num_avail_hc_at_end = 0;
 #endif /* DEBUG_HOST_CHANNELS */
 
-extern int g_next_sched_frame, g_np_count, g_np_sent;
-
-extern haint_data_t haint_saved;
-extern hcintmsk_data_t hcintmsk_saved[MAX_EPS_CHANNELS];
-extern hcint_data_t hcint_saved[MAX_EPS_CHANNELS];
-extern gintsts_data_t ginsts_saved;
 
 dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void)
 {
@@ -295,7 +290,7 @@ static int32_t dwc_otg_hcd_disconnect_cb(void *p)
 	 */
 	dwc_otg_hcd->flags.b.port_connect_status_change = 1;
 	dwc_otg_hcd->flags.b.port_connect_status = 0;
-	if(fiq_fix_enable)
+	if(fiq_enable)
 		local_fiq_disable();
 	/*
 	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
@@ -392,20 +387,15 @@ static int32_t dwc_otg_hcd_disconnect_cb(void *p)
 				channel->qh = NULL;
 			}
 		}
-		if(fiq_split_enable) {
+		if(fiq_fsm_enable) {
 			for(i=0; i < 128; i++) {
 				dwc_otg_hcd->hub_port[i] = 0;
 			}
-			haint_saved.d32 = 0;
-			for(i=0; i < MAX_EPS_CHANNELS; i++) {
-				hcint_saved[i].d32 = 0;
-				hcintmsk_saved[i].d32 = 0;
-			}
 		}
 
 	}
 
-	if(fiq_fix_enable)
+	if(fiq_enable)
 		local_fiq_enable();
 
 	if (dwc_otg_hcd->fops->disconnect) {
@@ -542,7 +532,7 @@ int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd,
 	}
 #endif
 	intr_mask.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->gintmsk);
-	if(!intr_mask.b.sofintr) needs_scheduling = 1;
+	if(!intr_mask.b.sofintr || fiq_enable) needs_scheduling = 1;
 	if((((dwc_otg_qh_t *)ep_handle)->ep_type == UE_BULK) && !(qtd->urb->flags & URB_GIVEBACK_ASAP))
 		/* Do not schedule SG transactions until qtd has URB_GIVEBACK_ASAP set */
 		needs_scheduling = 0;
@@ -613,6 +603,7 @@ int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd,
 	if (urb_qtd->in_process && qh->channel) {
 		/* The QTD is in process (it has been assigned to a channel). */
 		if (hcd->flags.b.port_connect_status) {
+			int n = qh->channel->hc_num;
 			/*
 			 * If still connected (i.e. in host mode), halt the
 			 * channel so it can be used for other transfers. If
@@ -620,10 +611,16 @@ int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd,
 			 * written to halt the channel since the core is in
 			 * device mode.
 			 */
-			dwc_otg_hc_halt(hcd->core_if, qh->channel,
-					DWC_OTG_HC_XFER_URB_DEQUEUE);
-
-			dwc_otg_hcd_release_port(hcd, qh);
+			/* In FIQ FSM mode, we need to shut down carefully.
+			 * The FIQ may attempt to restart a disabled channel */
+			if (fiq_fsm_enable && (hcd->fiq_state->channel[n].fsm != FIQ_PASSTHROUGH)) {
+				qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE;
+				qh->channel->halt_pending = 1;
+				hcd->fiq_state->channel[n].fsm = FIQ_DEQUEUE_ISSUED;
+			} else {
+				dwc_otg_hc_halt(hcd->core_if, qh->channel,
+						DWC_OTG_HC_XFER_URB_DEQUEUE);
+			}
 		}
 	}
 
@@ -759,7 +756,6 @@ static void completion_tasklet_func(void *ptr)
 
 		usb_hcd_giveback_urb(hcd->priv, urb, urb->status);
 
-		fiq_print(FIQDBG_PORTHUB, "COMPLETE");
 
 		DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
 	}
@@ -854,6 +850,34 @@ void dwc_otg_hcd_power_up(void *ptr)
 	cil_hcd_start(core_if);
 }
 
+void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num)
+{
+	struct fiq_channel_state *st = &hcd->fiq_state->channel[num];
+	struct fiq_dma_blob *blob = hcd->fiq_dmab;
+	int i;
+
+	st->fsm = FIQ_PASSTHROUGH;
+	st->hcchar_copy.d32 = 0;
+	st->hcsplt_copy.d32 = 0;
+	st->hcint_copy.d32 = 0;
+	st->hcintmsk_copy.d32 = 0;
+	st->hctsiz_copy.d32 = 0;
+	st->hcdma_copy.d32 = 0;
+	st->nr_errors = 0;
+	st->hub_addr = 0;
+	st->port_addr = 0;
+	st->expected_uframe = 0;
+	st->nrpackets = 0;
+	st->dma_info.index = 0;
+	for (i = 0; i < 6; i++)
+		st->dma_info.slot_len[i] = 255;
+	st->hs_isoc_info.index = 0;
+	st->hs_isoc_info.iso_desc = NULL;
+	st->hs_isoc_info.nrframes = 0;
+
+	DWC_MEMSET(&blob->channel[num].index[0], 0x6b, 1128);
+}
+
 /**
  * Frees secondary storage associated with the dwc_otg_hcd structure contained
  * in the struct usb_hcd field.
@@ -907,6 +931,7 @@ static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd)
 	DWC_TIMER_FREE(dwc_otg_hcd->conn_timer);
 	DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet);
 	DWC_TASK_FREE(dwc_otg_hcd->completion_tasklet);
+	DWC_FREE(dwc_otg_hcd->fiq_state);
 
 #ifdef DWC_DEV_SRPCAP
 	if (dwc_otg_hcd->core_if->power_down == 2 &&
@@ -979,6 +1004,59 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if)
 			    channel);
 	}
 
+	if (fiq_enable) {
+		hcd->fiq_state = DWC_ALLOC(sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels));
+		if (!hcd->fiq_state) {
+			retval = -DWC_E_NO_MEMORY;
+			DWC_ERROR("%s: cannot allocate fiq_state structure\n", __func__);
+			dwc_otg_hcd_free(hcd);
+			goto out;
+		}
+		DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels)));
+
+		for (i = 0; i < num_channels; i++) {
+			hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH;
+		}
+		hcd->fiq_state->dummy_send = DWC_ALLOC_ATOMIC(16);
+
+		hcd->fiq_stack = DWC_ALLOC(sizeof(struct fiq_stack));
+		if (!hcd->fiq_stack) {
+			retval = -DWC_E_NO_MEMORY;
+			DWC_ERROR("%s: cannot allocate fiq_stack structure\n", __func__);
+			dwc_otg_hcd_free(hcd);
+			goto out;
+		}
+		hcd->fiq_stack->magic1 = 0xDEADBEEF;
+		hcd->fiq_stack->magic2 = 0xD00DFEED;
+		hcd->fiq_state->gintmsk_saved.d32 = ~0;
+		hcd->fiq_state->haintmsk_saved.b2.chint = ~0;
+
+		/* This bit is terrible and uses no API, but necessary. The FIQ has no concept of DMA pools
+		 * (and if it did, would be a lot slower). This allocates a chunk of memory (~9kiB for 8 host channels)
+		 * for use as transaction bounce buffers in a 2-D array. Our access into this chunk is done by some
+		 * moderately readable array casts.
+		 */
+		hcd->fiq_dmab = DWC_DMA_ALLOC((sizeof(struct fiq_dma_channel) * num_channels), &hcd->fiq_state->dma_base);
+		DWC_WARN("FIQ DMA bounce buffers: virt = 0x%08x dma = 0x%08x len=%d",
+				(unsigned int)hcd->fiq_dmab, (unsigned int)hcd->fiq_state->dma_base,
+				sizeof(struct fiq_dma_channel) * num_channels);
+
+		DWC_MEMSET(hcd->fiq_dmab, 0x6b, 9024);
+
+		/* pointer for debug in fiq_print */
+		hcd->fiq_state->fiq_dmab = hcd->fiq_dmab;
+		if (fiq_fsm_enable) {
+			int i;
+			for (i=0; i < hcd->core_if->core_params->host_channels; i++) {
+				dwc_otg_cleanup_fiq_channel(hcd, i);
+			}
+			DWC_PRINTF("FIQ FSM acceleration enabled for :\n%s%s%s",
+				(fiq_fsm_mask & 0x1) ? "Non-periodic Split Transactions\n" : "",
+				(fiq_fsm_mask & 0x2) ? "Periodic Split Transactions\n" : "",
+				(fiq_fsm_mask & 0x4) ? "High-Speed Isochronous Endpoints\n" : "");
+		}
+	}
+
 	/* Initialize the Connection timeout timer. */
 	hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer",
 					  dwc_otg_hcd_connect_timeout, 0);
@@ -1176,7 +1254,8 @@ static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
 		hc->do_split = 1;
 		hc->xact_pos = qtd->isoc_split_pos;
 		/* We don't need to do complete splits anymore */
-		if(fiq_split_enable)
+//		if(fiq_fsm_enable)
+		if (0)
 			hc->complete_split = qtd->complete_split = 0;
 		else
 			hc->complete_split = qtd->complete_split;
@@ -1327,62 +1406,487 @@ static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
 	hc->qh = qh;
 }
 
-/*
-** Check the transaction to see if the port / hub has already been assigned for
-** a split transaction
-**
-** Return 0 - Port is already in use
-*/
-int dwc_otg_hcd_allocate_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh)
+
+/**
+ * fiq_fsm_transaction_suitable() - Test a QH for compatibility with the FIQ
+ * @qh:	pointer to the endpoint's queue head
+ *
+ * Transaction start/end control flow is grafted onto the existing dwc_otg
+ * mechanisms, to avoid spaghettifying the functions more than they already are.
+ * This function's eligibility check is altered by debug parameter.
+ *
+ * Returns: 0 for unsuitable, 1 implies the FIQ can be enabled for this transaction.
+ */
+
+int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh)
 {
-	uint32_t hub_addr, port_addr;
+	if (qh->do_split) {
+		switch (qh->ep_type) {
+		case UE_CONTROL:
+		case UE_BULK:
+			if (fiq_fsm_mask & (1 << 0))
+				return 1;
+			break;
+		case UE_INTERRUPT:
+		case UE_ISOCHRONOUS:
+			if (fiq_fsm_mask & (1 << 1))
+				return 1;
+			break;
+		default:
+			break;
+		}
+	} else if (qh->ep_type == UE_ISOCHRONOUS) {
+		if (fiq_fsm_mask & (1 << 2)) {
+			/* HS ISOCH support. We test for compatibility:
+			 * - DWORD aligned buffers
+			 * - Must be at least 2 transfers (otherwise pointless to use the FIQ)
+			 * If yes, then the fsm enqueue function will handle the state machine setup.
+			 */
+			dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
+			dwc_otg_hcd_urb_t *urb = qtd->urb;
+			struct dwc_otg_hcd_iso_packet_desc (*iso_descs)[0] = &urb->iso_descs;
+			int nr_iso_frames = urb->packet_count;
+			int i;
+			uint32_t ptr;
+
+			if (nr_iso_frames < 2)
+				return 0;
+			for (i = 0; i < nr_iso_frames; i++) {
+				ptr = urb->dma + iso_descs[i]->offset;
+				if (ptr & 0x3) {
+					printk_ratelimited("%s: Non-Dword aligned isochronous frame offset."
+							" Cannot queue FIQ-accelerated transfer to device %d endpoint %d\n",
+							__FUNCTION__, qh->channel->dev_addr, qh->channel->ep_num);
+					return 0;
+				}
+			}
+			return 1;
+		}
+	}
+	return 0;
+}
 
-	if(!fiq_split_enable)
-		return 0;
+/**
+ * fiq_fsm_setup_periodic_dma() - Set up DMA bounce buffers
+ * @hcd: Pointer to the dwc_otg_hcd struct
+ * @qh: Pointer to the endpoint's queue head
+ *
+ * Periodic split transactions are transmitted modulo 188 bytes.
+ * This necessitates slicing data up into buckets for isochronous out
+ * and fixing up the DMA address for all IN transfers.
+ *
+ * Returns 1 if the DMA bounce buffers have been used, 0 if the default
+ * HC buffer has been used.
+ */
+int fiq_fsm_setup_periodic_dma(dwc_otg_hcd_t *hcd, struct fiq_channel_state *st, dwc_otg_qh_t *qh)
+ {
+	int frame_length, i = 0;
+	uint8_t *ptr = NULL;
+	dwc_hc_t *hc = qh->channel;
+	struct fiq_dma_blob *blob;
+	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
+
+	for (i = 0; i < 6; i++) {
+		st->dma_info.slot_len[i] = 255;
+	}
+	st->dma_info.index = 0;
+	i = 0;
+	if (hc->ep_is_in) {
+		/*
+		 * Set dma_regs to bounce buffer. FIQ will update the
+		 * state depending on transaction progress.
+		 */
+		blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base;
+		st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0];
+		/* Calculate the max number of CSPLITS such that the FIQ can time out
+		 * a transaction if it fails.
+		 */
+		frame_length = st->hcchar_copy.b.mps;
+		do {
+			i++;
+			frame_length -= 188;
+		} while (frame_length >= 0);
+		st->nrpackets = i;
+		return 1;
+	} else {
+		if (qh->ep_type == UE_ISOCHRONOUS) {
 
-	hcd->fops->hub_info(hcd, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->priv, &hub_addr, &port_addr);
+			dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
 
-	if(hcd->hub_port[hub_addr] & (1 << port_addr))
-	{
-		fiq_print(FIQDBG_PORTHUB, "H%dP%d:S%02d", hub_addr, port_addr, qh->skip_count);
+			frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
+			frame_length = frame_desc->length;
 
-		qh->skip_count++;
+			/* Virtual address for bounce buffers */
+			blob = hcd->fiq_dmab;
 
-		if(qh->skip_count > 40000)
-		{
-			printk_once(KERN_ERR "Error: Having to skip port allocation");
-			local_fiq_disable();
-			BUG();
+			ptr = qtd->urb->buf + frame_desc->offset;
+			if (frame_length == 0) {
+				/*
+				 * for isochronous transactions, we must still transmit a packet
+				 * even if the length is zero.
+				 */
+				st->dma_info.slot_len[0] = 0;
+				st->nrpackets = 1;
+			} else {
+				do {
+					if (frame_length <= 188) {
+						dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, frame_length);
+						st->dma_info.slot_len[i] = frame_length;
+						ptr += frame_length;
+					} else {
+						dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, 188);
+						st->dma_info.slot_len[i] = 188;
+						ptr += 188;
+					}
+					i++;
+					frame_length -= 188;
+				} while (frame_length > 0);
+				st->nrpackets = i;
+			}
+			ptr = qtd->urb->buf + frame_desc->offset;
+			/* Point the HC at the DMA address of the bounce buffers */
+			blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base;
+			st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0];
+			
+			/* fixup xfersize to the actual packet size */
+			st->hctsiz_copy.b.pid = 0;
+			st->hctsiz_copy.b.xfersize = st->dma_info.slot_len[0];
+			return 1;
+		} else {
+			/* For interrupt, single OUT packet required, goes in the SSPLIT from hc_buff. */
 			return 0;
 		}
-		return 1;
 	}
-	else
-	{
-		qh->skip_count = 0;
-		hcd->hub_port[hub_addr] |= 1 << port_addr;
-		fiq_print(FIQDBG_PORTHUB, "H%dP%d:A %d", hub_addr, port_addr, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->pipe_info.ep_num);
-#ifdef FIQ_DEBUG
-		hcd->hub_port_alloc[hub_addr * 16 + port_addr] = dwc_otg_hcd_get_frame_number(hcd);
-#endif
+}
+
+/*
+ * Pushing a periodic request into the queue near the EOF1 point
+ * in a microframe causes erroneous behaviour (frmovrun) interrupt.
+ * Usually, the request goes out on the bus causing a transfer but
+ * the core does not transfer the data to memory.
+ * This guard interval (in number of 60MHz clocks) is required which
+ * must cater for CPU latency between reading the value and enabling
+ * the channel.
+ */
+#define PERIODIC_FRREM_BACKOFF 1000
+
+int fiq_fsm_queue_isoc_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
+{
+	dwc_hc_t *hc = qh->channel;
+	dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
+	dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
+	int frame;
+	struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num];
+	int xfer_len, nrpackets;
+	hcdma_data_t hcdma;
+	hfnum_data_t hfnum;
+
+	if (st->fsm != FIQ_PASSTHROUGH)
 		return 0;
+
+	st->nr_errors = 0;
+
+	st->hcchar_copy.d32 = 0;
+	st->hcchar_copy.b.mps = hc->max_packet;
+	st->hcchar_copy.b.epdir = hc->ep_is_in;
+	st->hcchar_copy.b.devaddr = hc->dev_addr;
+	st->hcchar_copy.b.epnum = hc->ep_num;
+	st->hcchar_copy.b.eptype = hc->ep_type;
+
+	st->hcintmsk_copy.b.chhltd = 1;
+
+	frame = dwc_otg_hcd_get_frame_number(hcd);
+	st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1;
+
+	st->hcchar_copy.b.lspddev = 0;
+	/* Enable the channel later as a final register write. */
+
+	st->hcsplt_copy.d32 = 0;
+
+	st->hs_isoc_info.iso_desc = (struct dwc_otg_hcd_iso_packet_desc *) &qtd->urb->iso_descs;
+	st->hs_isoc_info.nrframes = qtd->urb->packet_count;
+	/* grab the next DMA address offset from the array */
+	st->hcdma_copy.d32 = qtd->urb->dma;
+	hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[0].offset;
+
+	/* We need to set multi_count. This is a bit tricky - has to be set per-transaction as
+	 * the core needs to be told to send the correct number. Caution: for IN transfers,
+	 * this is always set to the maximum size of the endpoint. */
+	xfer_len = st->hs_isoc_info.iso_desc[0].length;
+	nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps;
+	if (nrpackets == 0)
+		nrpackets = 1;
+	st->hcchar_copy.b.multicnt = nrpackets;
+	st->hctsiz_copy.b.pktcnt = nrpackets;
+
+	/* Initial PID also needs to be set */
+	if (st->hcchar_copy.b.epdir == 0) {
+		st->hctsiz_copy.b.xfersize = xfer_len;
+		switch (st->hcchar_copy.b.multicnt) {
+		case 1:
+			st->hctsiz_copy.b.pid = DWC_PID_DATA0;
+			break;
+		case 2:
+		case 3:
+			st->hctsiz_copy.b.pid = DWC_PID_MDATA;
+			break;
+		}
+
+	} else {
+		st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps;
+		switch (st->hcchar_copy.b.multicnt) {
+		case 1:
+			st->hctsiz_copy.b.pid = DWC_PID_DATA0;
+			break;
+		case 2:
+			st->hctsiz_copy.b.pid = DWC_PID_DATA1;
+			break;
+		case 3:
+			st->hctsiz_copy.b.pid = DWC_PID_DATA2;
+			break;
+		}
 	}
+
+	fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ  %01d ", hc->hc_num);
+	fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcchar_copy.d32);
+	fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32);
+	fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32);
+	hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum);
+	local_fiq_disable();
+	DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32);
+	DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32);
+	DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32);
+	DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32);
+	DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32);
+	if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) {
+		/* Prevent queueing near EOF1. Bad things happen if a periodic
+		 * split transaction is queued very close to EOF.
+		 */
+		st->fsm = FIQ_HS_ISOC_SLEEPING;
+	} else {
+		st->fsm = FIQ_HS_ISOC_TURBO;
+		st->hcchar_copy.b.chen = 1;
+		DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32);
+	}
+	mb();
+	st->hcchar_copy.b.chen = 0;
+	local_fiq_enable();
+	return 0;
 }
-void dwc_otg_hcd_release_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh)
+
+
+/**
+ * fiq_fsm_queue_split_transaction() - Set up a host channel and FIQ state
+ * @hcd: Pointer to the dwc_otg_hcd struct
+ * @qh: Pointer to the endpoint's queue head
+ *
+ * This overrides the dwc_otg driver's normal method of queueing a transaction.
+ * Called from dwc_otg_hcd_queue_transactions(), this performs specific setup
+ * for the nominated host channel.
+ *
+ * For periodic transfers, it also peeks at the FIQ state to see if an immediate
+ * start is possible. If not, then the FIQ is left to start the transfer.
+ */
+int fiq_fsm_queue_split_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
 {
-	uint32_t hub_addr, port_addr;
+	int start_immediate = 1, i;
+	hfnum_data_t hfnum;
+	dwc_hc_t *hc = qh->channel;
+	dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
+	/* Program HC registers, setup FIQ_state, examine FIQ if periodic, start transfer (not if uframe 5) */
+	int hub_addr, port_addr, frame, uframe;
+	struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num];
 
-	if(!fiq_split_enable)
-		return;
+	if (st->fsm != FIQ_PASSTHROUGH)
+		return 0;
+	st->nr_errors = 0;
+
+	st->hcchar_copy.d32 = 0;
+	st->hcchar_copy.b.mps = hc->max_packet;
+	st->hcchar_copy.b.epdir = hc->ep_is_in;
+	st->hcchar_copy.b.devaddr = hc->dev_addr;
+	st->hcchar_copy.b.epnum = hc->ep_num;
+	st->hcchar_copy.b.eptype = hc->ep_type;
+	if (hc->ep_type & 0x1) {
+		if (hc->ep_is_in)
+			st->hcchar_copy.b.multicnt = 3;
+		else
+			/* Docs say set this to 1, but driver sets to 0! */
+			st->hcchar_copy.b.multicnt = 0;
+	} else {
+		st->hcchar_copy.b.multicnt = 1;
+		st->hcchar_copy.b.oddfrm = 0;
+	}
+	st->hcchar_copy.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW) ? 1 : 0;
+	/* Enable the channel later as a final register write. */
+
+	st->hcsplt_copy.d32 = 0;
+	if(qh->do_split) {
+		hcd->fops->hub_info(hcd, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->priv, &hub_addr, &port_addr);
+		st->hcsplt_copy.b.compsplt = 0;
+		st->hcsplt_copy.b.spltena = 1;
+		// XACTPOS is for isoc-out only but needs initialising anyway.
+		st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_ALL;
+		if((qh->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!qh->ep_is_in)) {
+			/* For packetsize 0 < L < 188, ISOC_XACTPOS_ALL.
+			 * for longer than this, ISOC_XACTPOS_BEGIN and the FIQ
+			 * will update as necessary.
+			 */
+			if (hc->xfer_len > 188) {
+				st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_BEGIN;
+			}
+		}
+		st->hcsplt_copy.b.hubaddr = (uint8_t) hub_addr;
+		st->hcsplt_copy.b.prtaddr = (uint8_t) port_addr;
+		st->hub_addr = hub_addr;
+		st->port_addr = port_addr;
+	}
 
-	hcd->fops->hub_info(hcd, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->priv, &hub_addr, &port_addr);
+	st->hctsiz_copy.d32 = 0;
+	st->hctsiz_copy.b.dopng = 0;
+	st->hctsiz_copy.b.pid = hc->data_pid_start;
 
-	hcd->hub_port[hub_addr] &= ~(1 << port_addr);
-#ifdef FIQ_DEBUG
-	hcd->hub_port_alloc[hub_addr * 16 + port_addr] = -1;
-#endif
-	fiq_print(FIQDBG_PORTHUB, "H%dP%d:RO%d", hub_addr, port_addr, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->pipe_info.ep_num);
+	if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
+		hc->xfer_len = hc->max_packet;
+	} else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
+		hc->xfer_len = 188;
+	}
+	st->hctsiz_copy.b.xfersize = hc->xfer_len;
+
+	st->hctsiz_copy.b.pktcnt = 1;
 
+	if (hc->ep_type & 0x1) {
+		/*
+		 * For potentially multi-packet transfers, must use the DMA bounce buffers. For IN transfers,
+		 * the DMA address is the address of the first 188byte slot buffer in the bounce buffer array.
+		 * For multi-packet OUT transfers, we need to copy the data into the bounce buffer array so the FIQ can punt
+		 * the right address out as necessary. hc->xfer_buff and hc->xfer_len have already been set
+		 * in assign_and_init_hc(), but this is for the eventual transaction completion only. The FIQ
+		 * must not touch internal driver state.
+		 */
+		if(!fiq_fsm_setup_periodic_dma(hcd, st, qh)) {
+			if (hc->align_buff) {
+				st->hcdma_copy.d32 = hc->align_buff;
+			} else {
+				st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF);
+			}
+		}
+	} else {
+		if (hc->align_buff) {
+			st->hcdma_copy.d32 = hc->align_buff;
+		} else {
+			st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF);
+		}
+	}
+	/* The FIQ depends upon no other interrupts being enabled except channel halt.
+	 * Fixup channel interrupt mask. */
+	st->hcintmsk_copy.d32 = 0;
+	st->hcintmsk_copy.b.chhltd = 1;
+	st->hcintmsk_copy.b.ahberr = 1;
+
+	DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32);
+	DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32);
+	DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32);
+	DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32);
+	DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32);
+
+	local_fiq_disable();
+	mb();
+
+	if (hc->ep_type & 0x1) {
+		hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum);
+		frame = (hfnum.b.frnum & ~0x7) >> 3;
+		uframe = hfnum.b.frnum & 0x7;
+		if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) {
+			/* Prevent queueing near EOF1. Bad things happen if a periodic
+			 * split transaction is queued very close to EOF.
+			 */
+			start_immediate = 0;
+		} else if (uframe == 5) {
+			start_immediate = 0;
+		} else if (hc->ep_type == UE_ISOCHRONOUS && !hc->ep_is_in) {
+			start_immediate = 0;
+		} else if (hc->ep_is_in && fiq_fsm_too_late(hcd->fiq_state, hc->hc_num)) {
+			start_immediate = 0;
+		} else {
+			/* Search through all host channels to determine if a transaction
+			 * is currently in progress */
+			for (i = 0; i < hcd->core_if->core_params->host_channels; i++) {
+				if (i == hc->hc_num || hcd->fiq_state->channel[i].fsm == FIQ_PASSTHROUGH)
+					continue;
+				switch (hcd->fiq_state->channel[i].fsm) {
+				/* TT is reserved for channels that are in the middle of a periodic
+				 * split transaction.
+				 */
+				case FIQ_PER_SSPLIT_STARTED:
+				case FIQ_PER_CSPLIT_WAIT:
+				case FIQ_PER_CSPLIT_NYET1:
+				case FIQ_PER_CSPLIT_POLL:
+				case FIQ_PER_ISO_OUT_ACTIVE:
+				case FIQ_PER_ISO_OUT_LAST:
+					if (hcd->fiq_state->channel[i].hub_addr == hub_addr &&
+							hcd->fiq_state->channel[i].port_addr == port_addr) {
+						start_immediate = 0;
+					}
+					break;
+				default:
+					break;
+				}
+				if (!start_immediate)
+					break;
+			}
+		}
+	}
+	fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d %01d", hc->hc_num, start_immediate);
+	fiq_print(FIQDBG_INT, hcd->fiq_state, "%08d", hfnum.b.frrem);
+	//fiq_print(FIQDBG_INT, hcd->fiq_state, "H:%02dP:%02d", hub_addr, port_addr);
+	//fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32);
+	//fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32);
+	switch (hc->ep_type) {
+		case UE_CONTROL:
+		case UE_BULK:
+			st->fsm = FIQ_NP_SSPLIT_STARTED;
+			break;
+		case UE_ISOCHRONOUS:
+			if (hc->ep_is_in) {
+				if (start_immediate) {
+					st->fsm = FIQ_PER_SSPLIT_STARTED;
+				} else {
+					st->fsm = FIQ_PER_SSPLIT_QUEUED;
+				}
+			} else {
+				if (start_immediate) {
+					/* Single-isoc OUT packets don't require FIQ involvement */
+					if (st->nrpackets == 1) {
+						st->fsm = FIQ_PER_ISO_OUT_LAST;
+					} else {
+						st->fsm = FIQ_PER_ISO_OUT_ACTIVE;
+					}
+				} else {
+					st->fsm = FIQ_PER_ISO_OUT_PENDING;
+				}
+			}
+			break;
+		case UE_INTERRUPT:
+				if (start_immediate) {
+					st->fsm = FIQ_PER_SSPLIT_STARTED;
+				} else {
+					st->fsm = FIQ_PER_SSPLIT_QUEUED;
+				}
+		default:
+			break;
+	}
+	if (start_immediate) {
+		/* Set the oddfrm bit as close as possible to actual queueing */
+		frame = dwc_otg_hcd_get_frame_number(hcd);
+		st->expected_uframe = (frame + 1) & 0x3FFF;
+		st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1;
+		st->hcchar_copy.b.chen = 1;
+		DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32);
+	}
+	mb();
+	local_fiq_enable();
+	return 0;
 }
 
 
@@ -1399,16 +1903,11 @@ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd)
 {
 	dwc_list_link_t *qh_ptr;
 	dwc_otg_qh_t *qh;
-	dwc_otg_qtd_t *qtd;
 	int num_channels;
 	dwc_irqflags_t flags;
 	dwc_spinlock_t *channel_lock = hcd->channel_lock;
 	dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
 
-#ifdef DEBUG_SOF
-	DWC_DEBUGPL(DBG_HCD, "  Select Transactions\n");
-#endif
-
 #ifdef DEBUG_HOST_CHANNELS
 	last_sel_trans_num_per_scheduled = 0;
 	last_sel_trans_num_nonper_scheduled = 0;
@@ -1423,26 +1922,11 @@ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd)
 
 		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
 
-		if(qh->do_split) {
-			qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
-			if(!(qh->ep_type == UE_ISOCHRONOUS &&
-					(qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
-					qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END))) {
-				if(dwc_otg_hcd_allocate_port(hcd, qh))
-				{
-					qh_ptr = DWC_LIST_NEXT(qh_ptr);
-					g_next_sched_frame = dwc_frame_num_inc(dwc_otg_hcd_get_frame_number(hcd), 1);
-					continue;
-				}
-			}
-		}
-
 		if (microframe_schedule) {
 			// Make sure we leave one channel for non periodic transactions.
 			DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
 			if (hcd->available_host_channels <= 1) {
 				DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
-				if(qh->do_split) dwc_otg_hcd_release_port(hcd, qh);
 				break;
 			}
 			hcd->available_host_channels--;
@@ -1478,27 +1962,24 @@ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd)
 	       !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
 
 		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-
 		/*
 		 * Check to see if this is a NAK'd retransmit, in which case ignore for retransmission
 		 * we hold off on bulk retransmissions to reduce NAK interrupt overhead for full-speed
 		 * cheeky devices that just hold off using NAKs
 		 */
-		if (nak_holdoff_enable && qh->do_split) {
-			if (qh->nak_frame != 0xffff &&
-				dwc_full_frame_num(qh->nak_frame) ==
-				dwc_full_frame_num(dwc_otg_hcd_get_frame_number(hcd))) {
-				/*
-				 * Revisit: Need to avoid trampling on periodic scheduling.
-				 * Currently we are safe because g_np_count != g_np_sent whenever we hit this,
-				 * but if this behaviour is changed then periodic endpoints will get a slower
-				 * polling rate.
-				 */
-				g_next_sched_frame = ((qh->nak_frame + 8) & ~7) & DWC_HFNUM_MAX_FRNUM;
-				qh_ptr = DWC_LIST_NEXT(qh_ptr);
-				continue;
-			} else {
-				qh->nak_frame = 0xffff;
+		if (nak_holdoff && qh->do_split) {
+			if (qh->nak_frame != 0xffff) {
+				uint16_t next_frame = dwc_frame_num_inc(qh->nak_frame, (qh->ep_type == UE_BULK) ? nak_holdoff : 8);
+				uint16_t frame = dwc_otg_hcd_get_frame_number(hcd);
+				if (dwc_frame_num_le(frame, next_frame)) {
+					if(dwc_frame_num_le(next_frame, hcd->fiq_state->next_sched_frame)) {
+						hcd->fiq_state->next_sched_frame = next_frame;
+					}
+					qh_ptr = DWC_LIST_NEXT(qh_ptr);
+					continue;
+				} else {
+					qh->nak_frame = 0xFFFF;
+				}
 			}
 		}
 
@@ -1527,12 +2008,31 @@ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd)
 				   &qh->qh_list_entry);
 		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
 
-		g_np_sent++;
 
 		if (!microframe_schedule)
 			hcd->non_periodic_channels++;
 	}
-
+	/* we moved a non-periodic QH to the active schedule. If the inactive queue is empty,
+	 * stop the FIQ from kicking us. We could potentially still have elements here if we
+	 * ran out of host channels.
+	 */
+	if (fiq_enable) {
+		if (DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive)) {
+			hcd->fiq_state->kick_np_queues = 0;
+		} else {
+			/* For each entry remaining in the NP inactive queue,
+			* if this a NAK'd retransmit then don't set the kick flag.
+			*/
+			if(nak_holdoff) {
+				DWC_LIST_FOREACH(qh_ptr, &hcd->non_periodic_sched_inactive) {
+					qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
+					if (qh->nak_frame == 0xFFFF) {
+						hcd->fiq_state->kick_np_queues = 1;
+					}
+				}
+			}
+		}
+	}
 	if(!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned))
 		ret_val |= DWC_OTG_TRANSACTION_PERIODIC;
 
@@ -1577,6 +2077,12 @@ static int queue_transaction(dwc_otg_hcd_t * hcd,
 				hc->qh->ping_state = 0;
 			}
 		} else if (!hc->xfer_started) {
+			if (fiq_fsm_enable && hc->error_state) {
+				hcd->fiq_state->channel[hc->hc_num].nr_errors =
+					DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list)->error_count;
+				hcd->fiq_state->channel[hc->hc_num].fsm =
+					FIQ_PASSTHROUGH_ERRORSTATE;
+			}
 			dwc_otg_hc_start_transfer(hcd->core_if, hc);
 			hc->qh->ping_state = 0;
 		}
@@ -1629,7 +2135,7 @@ static void process_periodic_channels(dwc_otg_hcd_t * hcd)
 	hptxsts_data_t tx_status;
 	dwc_list_link_t *qh_ptr;
 	dwc_otg_qh_t *qh;
-	int status;
+	int status = 0;
 	int no_queue_space = 0;
 	int no_fifo_space = 0;
 
@@ -1658,27 +2164,34 @@ static void process_periodic_channels(dwc_otg_hcd_t * hcd)
 
 		// Do not send a split start transaction any later than frame .6
 		// Note, we have to schedule a periodic in .5 to make it go in .6
-		if(fiq_split_enable && qh->do_split && ((dwc_otg_hcd_get_frame_number(hcd) + 1) & 7) > 6)
+		if(fiq_fsm_enable && qh->do_split && ((dwc_otg_hcd_get_frame_number(hcd) + 1) & 7) > 6)
 		{
 			qh_ptr = qh_ptr->next;
-			g_next_sched_frame = dwc_otg_hcd_get_frame_number(hcd) | 7;
+			hcd->fiq_state->next_sched_frame = dwc_otg_hcd_get_frame_number(hcd) | 7;
 			continue;
 		}
 
-		/*
-		 * Set a flag if we're queuing high-bandwidth in slave mode.
-		 * The flag prevents any halts to get into the request queue in
-		 * the middle of multiple high-bandwidth packets getting queued.
-		 */
-		if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) {
-			hcd->core_if->queuing_high_bandwidth = 1;
-		}
-		status =
-		    queue_transaction(hcd, qh->channel,
-				      tx_status.b.ptxfspcavail);
-		if (status < 0) {
-			no_fifo_space = 1;
-			break;
+		if (fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) {
+			if (qh->do_split)
+				fiq_fsm_queue_split_transaction(hcd, qh);
+			else
+				fiq_fsm_queue_isoc_transaction(hcd, qh);
+		} else {
+
+			/*
+			 * Set a flag if we're queueing high-bandwidth in slave mode.
+			 * The flag prevents any halts to get into the request queue in
+			 * the middle of multiple high-bandwidth packets getting queued.
+			 */
+			if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) {
+				hcd->core_if->queuing_high_bandwidth = 1;
+			}
+			status = queue_transaction(hcd, qh->channel,
+							tx_status.b.ptxfspcavail);
+			if (status < 0) {
+				no_fifo_space = 1;
+				break;
+			}
 		}
 
 		/*
@@ -1795,25 +2308,19 @@ static void process_non_periodic_channels(dwc_otg_hcd_t * hcd)
 		qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t,
 				    qh_list_entry);
 
-		// Do not send a split start transaction any later than frame .5
-		// non periodic transactions will start immediately in this uframe
-		if(fiq_split_enable && qh->do_split && ((dwc_otg_hcd_get_frame_number(hcd) + 1) & 7) > 6)
-		{
-			g_next_sched_frame = dwc_otg_hcd_get_frame_number(hcd) | 7;
-			break;
-		}
-
-		status =
-		    queue_transaction(hcd, qh->channel,
-				      tx_status.b.nptxfspcavail);
+		if(fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) {
+			fiq_fsm_queue_split_transaction(hcd, qh);
+		} else {
+			status = queue_transaction(hcd, qh->channel,
+						tx_status.b.nptxfspcavail);
 
-		if (status > 0) {
-			more_to_do = 1;
-		} else if (status < 0) {
-			no_fifo_space = 1;
-			break;
+			if (status > 0) {
+				more_to_do = 1;
+			} else if (status < 0) {
+				no_fifo_space = 1;
+				break;
+			}
 		}
-
 		/* Advance to next QH, skipping start-of-list entry. */
 		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
 		if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd.h b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h
index 0007fa1..da2986244 100644
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.h
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h
@@ -40,6 +40,8 @@
 #include "dwc_otg_core_if.h"
 #include "dwc_list.h"
 #include "dwc_otg_cil.h"
+#include "dwc_otg_fiq_fsm.h"
+
 
 /**
  * @file
@@ -585,6 +587,12 @@ struct dwc_otg_hcd {
 	/** Frame List DMA address */
 	dma_addr_t frame_list_dma;
 
+	struct fiq_stack *fiq_stack;
+	struct fiq_state *fiq_state;
+	
+	/** Virtual address for split transaction DMA bounce buffers */
+	struct fiq_dma_blob *fiq_dmab;
+	
 #ifdef DEBUG
 	uint32_t frrem_samples;
 	uint64_t frrem_accum;
@@ -615,6 +623,9 @@ extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd,
 int dwc_otg_hcd_allocate_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh);
 void dwc_otg_hcd_release_port(dwc_otg_hcd_t * dwc_otg_hcd, dwc_otg_qh_t *qh);
 
+extern int fiq_fsm_queue_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
+extern int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh);
+extern void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num);
 
 /** @} */
 
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
index 64d33a5..d3e2035 100644
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
@@ -34,7 +34,6 @@
 
 #include "dwc_otg_hcd.h"
 #include "dwc_otg_regs.h"
-#include "dwc_otg_mphi_fix.h"
 
 #include <linux/jiffies.h>
 #include <mach/hardware.h>
@@ -47,33 +46,8 @@ extern bool microframe_schedule;
  * This file contains the implementation of the HCD Interrupt handlers.
  */
 
-/*
- * Some globals to communicate between the FIQ and INTERRUPT
- */
-
-void * dummy_send;
-mphi_regs_t c_mphi_regs;
-volatile void *dwc_regs_base;
 int fiq_done, int_done;
 
-gintsts_data_t  gintsts_saved = {.d32 = 0};
-hcint_data_t    hcint_saved[MAX_EPS_CHANNELS];
-hcintmsk_data_t hcintmsk_saved[MAX_EPS_CHANNELS];
-int             split_out_xfersize[MAX_EPS_CHANNELS];
-haint_data_t    haint_saved;
-
-int g_next_sched_frame, g_np_count, g_np_sent;
-static int mphi_int_count = 0 ;
-
-hcchar_data_t nak_hcchar;
-hctsiz_data_t nak_hctsiz;
-hcsplt_data_t nak_hcsplt;
-int nak_count;
-
-int complete_sched[MAX_EPS_CHANNELS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1};
-int split_start_frame[MAX_EPS_CHANNELS];
-int queued_port[MAX_EPS_CHANNELS];
-
 #ifdef FIQ_DEBUG
 char buffer[1000*16];
 int wptr;
@@ -83,12 +57,10 @@ void notrace _fiq_print(FIQDBG_T dbg_lvl, char *fmt, ...)
 	va_list args;
 	char text[17];
 	hfnum_data_t hfnum = { .d32 = FIQ_READ(dwc_regs_base + 0x408) };
-	unsigned long flags;
 
-	local_irq_save(flags);
-	local_fiq_disable();
 	if(dbg_lvl & dbg_lvl_req || dbg_lvl == FIQDBG_ERR)
 	{
+		local_fiq_disable();
 		snprintf(text, 9, "%4d%d:%d ", hfnum.b.frnum/8, hfnum.b.frnum%8, 8 - hfnum.b.frrem/937);
 		va_start(args, fmt);
 		vsnprintf(text+8, 9, fmt, args);
@@ -96,410 +68,21 @@ void notrace _fiq_print(FIQDBG_T dbg_lvl, char *fmt, ...)
 
 		memcpy(buffer + wptr, text, 16);
 		wptr = (wptr + 16) % sizeof(buffer);
+		local_fiq_enable();
 	}
-	local_irq_restore(flags);
 }
 #endif
 
-void notrace fiq_queue_request(int channel, int odd_frame)
-{
-	hcchar_data_t   hcchar   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x0)  };
-	hcsplt_data_t   hcsplt   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x4)  };
-	hctsiz_data_t   hctsiz   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x10) };
-
-	if(hcsplt.b.spltena	== 0)
-	{
-		fiq_print(FIQDBG_ERR, "SPLTENA ");
-		BUG();
-	}
-
-	if(hcchar.b.epdir == 1)
-	{
-		fiq_print(FIQDBG_SCHED, "IN  Ch %d", channel);
-	}
-	else
-	{
-		hctsiz.b.xfersize = 0;
-		fiq_print(FIQDBG_SCHED, "OUT Ch %d", channel);
-	}
-	FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0x10), hctsiz.d32);
-
-	hcsplt.b.compsplt = 1;
-	FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0x4), hcsplt.d32);
-
-	// Send the Split complete
-	hcchar.b.chen = 1;
-	hcchar.b.oddfrm = odd_frame ? 1 : 0;
-
-	// Post this for transmit on the next frame for periodic or this frame for non-periodic
-	fiq_print(FIQDBG_SCHED, "SND_%s", odd_frame ? "ODD " : "EVEN");
-
-	FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0x0), hcchar.d32);
-}
-
-static int last_sof = -1;
-
-/*
-** Function to handle the start of frame interrupt, choose whether we need to do anything and
-** therefore trigger the main interrupt
-**
-** returns int != 0 - interrupt has been handled
-*/
-int diff;
-
-int notrace fiq_sof_handle(hfnum_data_t hfnum)
-{
-	int handled = 0;
-	int i;
-
-	// Just check that once we're running we don't miss a SOF
-	/*if(last_sof != -1 && (hfnum.b.frnum != ((last_sof + 1) & 0x3fff)))
-	{
-		fiq_print(FIQDBG_ERR, "LASTSOF ");
-		fiq_print(FIQDBG_ERR, "%4d%d   ", last_sof / 8, last_sof & 7);
-		fiq_print(FIQDBG_ERR, "%4d%d   ", hfnum.b.frnum / 8, hfnum.b.frnum & 7);
-		BUG();
-	}*/
-
-	// Only start remembering the last sof when the interrupt has been
-	// enabled (we don't check the mask to come in here...)
-	if(last_sof != -1 || FIQ_READ(dwc_regs_base + 0x18) & (1<<3))
-		last_sof = hfnum.b.frnum;
-
-	for(i = 0; i < MAX_EPS_CHANNELS; i++)
-	{
-		if(complete_sched[i] != -1)
-		{
-			if(complete_sched[i] <= hfnum.b.frnum || (complete_sched[i] > 0x3f00 && hfnum.b.frnum < 0xf0))
-			{
-				fiq_queue_request(i, hfnum.b.frnum & 1);
-				complete_sched[i] = -1;
-			}
-		}
-
-		if(complete_sched[i] != -1)
-		{
-			// This is because we've seen a split complete occur with no start...
-			// most likely because missed the complete 0x3fff frames ago!
-
-			diff = (hfnum.b.frnum + 0x3fff - complete_sched[i]) & 0x3fff ;
-			if(diff > 32 && diff < 0x3f00)
-			{
-				fiq_print(FIQDBG_ERR, "SPLTMISS");
-				BUG();
-			}
-		}
-	}
-
-	if(g_np_count == g_np_sent && dwc_frame_num_gt(g_next_sched_frame, hfnum.b.frnum))
-	{
-		/*
-		 * If np_count != np_sent that means we need to queue non-periodic (bulk) packets this packet
-		 * g_next_sched_frame is the next frame we have periodic packets for
-		 *
-		 * if neither of these are required for this frame then just clear the interrupt
-		 */
-		handled = 1;
-
-	}
-
-	return handled;
-}
-
-int notrace port_id(hcsplt_data_t hcsplt)
-{
-	return hcsplt.b.prtaddr + (hcsplt.b.hubaddr << 8);
-}
-
-int notrace fiq_hcintr_handle(int channel, hfnum_data_t hfnum)
-{
-	hcchar_data_t   hcchar   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x0) };
-	hcsplt_data_t   hcsplt   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x4) };
-	hcint_data_t    hcint    = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x8) };
-	hcintmsk_data_t hcintmsk = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0xc) };
-	hctsiz_data_t   hctsiz   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x10)};
-
-	hcint_saved[channel].d32 |= hcint.d32;
-	hcintmsk_saved[channel].d32 =  hcintmsk.d32;
-
-	if(hcsplt.b.spltena)
-	{
-		fiq_print(FIQDBG_PORTHUB, "ph: %4x", port_id(hcsplt));
-		if(hcint.b.chhltd)
-		{
-			fiq_print(FIQDBG_SCHED, "CH HLT %d", channel);
-			fiq_print(FIQDBG_SCHED, "%08x", hcint_saved[channel]);
-		}
-		if(hcint.b.stall || hcint.b.xacterr || hcint.b.bblerr || hcint.b.frmovrun || hcint.b.datatglerr)
-		{
-			queued_port[channel] = 0;
-			fiq_print(FIQDBG_ERR, "CHAN ERR");
-		}
-		if(hcint.b.xfercomp)
-		{
-			// Clear the port allocation and transmit anything also on this port
-			queued_port[channel] = 0;
-			fiq_print(FIQDBG_SCHED, "XFERCOMP");
-		}
-		if(hcint.b.nak)
-		{
-			queued_port[channel] = 0;
-			fiq_print(FIQDBG_SCHED, "NAK");
-		}
-		if(hcint.b.ack && !hcsplt.b.compsplt)
-		{
-			int i;
-
-			// Do not complete isochronous out transactions
-			if(hcchar.b.eptype == 1 && hcchar.b.epdir == 0)
-			{
-				queued_port[channel] = 0;
-				fiq_print(FIQDBG_SCHED, "ISOC_OUT");
-			}
-			else
-			{
-				// Make sure we check the port / hub combination that we sent this split on.
-				// Do not queue a second request to the same port
-				for(i = 0; i < MAX_EPS_CHANNELS; i++)
-				{
-					if(port_id(hcsplt) == queued_port[i])
-					{
-						fiq_print(FIQDBG_ERR, "PORTERR ");
-						//BUG();
-					}
-				}
-
-				split_start_frame[channel] = (hfnum.b.frnum + 1) & ~7;
-
-				// Note, the size of an OUT is in the start split phase, not
-				// the complete split
-				split_out_xfersize[channel] = hctsiz.b.xfersize;
-
-				hcint_saved[channel].b.chhltd = 0;
-				hcint_saved[channel].b.ack = 0;
-
-				queued_port[channel] = port_id(hcsplt);
-
-				if(hcchar.b.eptype & 1)
-				{
-					// Send the periodic complete in the same oddness frame as the ACK went...
-					fiq_queue_request(channel, !(hfnum.b.frnum & 1));
-	//				complete_sched[channel] = dwc_frame_num_inc(hfnum.b.frnum, 1);
-				}
-				else
-				{
-					// Schedule the split complete to occur later
-					complete_sched[channel] = dwc_frame_num_inc(hfnum.b.frnum, 2);
-					fiq_print(FIQDBG_SCHED, "ACK%04d%d", complete_sched[channel]/8, complete_sched[channel]%8);
-				}
-			}
-		}
-		if(hcint.b.nyet)
-		{
-			fiq_print(FIQDBG_ERR, "NYETERR1");
-			//BUG();
-			// Can transmit a split complete up to uframe .0 of the next frame
-			if(hfnum.b.frnum <= dwc_frame_num_inc(split_start_frame[channel], 8))
-			{
-				// Send it next frame
-				if(hcchar.b.eptype & 1) // type 1 & 3 are interrupt & isoc
-				{
-					fiq_print(FIQDBG_SCHED, "NYT:SEND");
-					fiq_queue_request(channel, !(hfnum.b.frnum & 1));
-				}
-				else
-				{
-					// Schedule non-periodic access for next frame (the odd-even bit doesn't effect NP)
-					complete_sched[channel] = dwc_frame_num_inc(hfnum.b.frnum, 1);
-					fiq_print(FIQDBG_SCHED, "NYT%04d%d", complete_sched[channel]/8, complete_sched[channel]%8);
-				}
-				hcint_saved[channel].b.chhltd = 0;
-				hcint_saved[channel].b.nyet = 0;
-			}
-			else
-			{
-				queued_port[channel] = 0;
-				fiq_print(FIQDBG_ERR, "NYETERR2");
-				//BUG();
-			}
-		}
-	}
-	else
-	{
-		/*
-		 * If we have any of NAK, ACK, Datatlgerr active on a
-		 * non-split channel, the sole reason is to reset error
-		 * counts for a previously broken transaction. The FIQ
-		 * will thrash on NAK IN and ACK OUT in particular so
-		 * handle it "once" and allow the IRQ to do the rest.
-		 */
-		hcint.d32 &= hcintmsk.d32;
-		if(hcint.b.nak)
-		{
-			hcintmsk.b.nak = 0;
-			FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0xc), hcintmsk.d32);
-		}
-		if (hcint.b.ack)
-		{
-			hcintmsk.b.ack = 0;
-			FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0xc), hcintmsk.d32);
-		}
-	}
-
-	// Clear the interrupt, this will also clear the HAINT bit
-	FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0x8), hcint.d32);
-	return hcint_saved[channel].d32 == 0;
-}
-
-gintsts_data_t gintsts;
-gintmsk_data_t gintmsk;
-// triggered: The set of interrupts that were triggered
-// handled:   The set of interrupts that have been handled (no IRQ is
-//            required)
-// keep:      The set of interrupts we want to keep unmasked even though we
-//            want to trigger an IRQ to handle it (SOF and HCINTR)
-gintsts_data_t triggered, handled, keep;
-hfnum_data_t hfnum;
-
-void __attribute__ ((naked)) notrace dwc_otg_hcd_handle_fiq(void)
-{
-
-	/* entry takes care to store registers we will be treading on here */
-	asm __volatile__ (
-		"mov     ip, sp ;"
-		/* stash FIQ and normal regs */
-		"stmdb	sp!, {r0-r12,  lr};"
-		/* !! THIS SETS THE FRAME, adjust to > sizeof locals */
-		"sub     fp, ip, #512 ;"
-		);
-
-	// Cannot put local variables at the beginning of the function
-	// because otherwise 'C' will play with the stack pointer. any locals
-	// need to be inside the following block
-	do
-	{
-		fiq_done++;
-		gintsts.d32 = FIQ_READ(dwc_regs_base + 0x14);
-		gintmsk.d32 = FIQ_READ(dwc_regs_base + 0x18);
-		hfnum.d32 =   FIQ_READ(dwc_regs_base + 0x408);
-		triggered.d32 = gintsts.d32 & gintmsk.d32;
-		handled.d32 = 0;
-		keep.d32 = 0;
-		fiq_print(FIQDBG_INT, "FIQ     ");
-		fiq_print(FIQDBG_INT, "%08x", gintsts.d32);
-		fiq_print(FIQDBG_INT, "%08x", gintmsk.d32);
-		if(gintsts.d32)
-		{
-			// If port enabled
-			if((FIQ_READ(dwc_regs_base + 0x440) & 0xf) == 0x5)
-			{
-				if(gintsts.b.sofintr)
-				{
-					if(fiq_sof_handle(hfnum))
-					{
-						handled.b.sofintr = 1; /* Handled in FIQ */
-					}
-					else
-					{
-						/* Keer interrupt unmasked */
-						keep.b.sofintr = 1;
-					}
-					{
-						// Need to make sure the read and clearing of the SOF interrupt is as close as possible to avoid the possibility of missing
-						// a start of frame interrupt
-						gintsts_data_t gintsts = { .b.sofintr = 1 };
-						FIQ_WRITE((dwc_regs_base + 0x14), gintsts.d32);
-					}
-				}
-
-				if(fiq_split_enable && gintsts.b.hcintr)
-				{
-					int i;
-					haint_data_t    haint;
-					haintmsk_data_t haintmsk;
-
-					haint.d32 = FIQ_READ(dwc_regs_base + 0x414);
-					haintmsk.d32 = FIQ_READ(dwc_regs_base + 0x418);
-					haint.d32 &= haintmsk.d32;
-					haint_saved.d32 |= haint.d32;
-
-					fiq_print(FIQDBG_INT, "hcintr");
-					fiq_print(FIQDBG_INT, "%08x", FIQ_READ(dwc_regs_base + 0x414));
-
-					// Go through each channel that has an enabled interrupt
-					for(i = 0; i < 16; i++)
-						if((haint.d32 >> i) & 1)
-							if(fiq_hcintr_handle(i, hfnum))
-								haint_saved.d32 &= ~(1 << i); /* this was handled */
-
-					/* If we've handled all host channel interrupts then don't trigger the interrupt */
-					if(haint_saved.d32 == 0)
-					{
-						handled.b.hcintr = 1;
-					}
-					else
-					{
-						/* Make sure we keep the channel interrupt unmasked when triggering the IRQ */
-						keep.b.hcintr = 1;
-					}
-
-					{
-						gintsts_data_t gintsts = { .b.hcintr = 1 };
-
-						// Always clear the channel interrupt
-						FIQ_WRITE((dwc_regs_base + 0x14), gintsts.d32);
-					}
-				}
-			}
-			else
-			{
-				last_sof = -1;
-			}
-		}
-
-		// Mask out the interrupts triggered - those handled - don't mask out the ones we want to keep
-		gintmsk.d32 = keep.d32 | (gintmsk.d32 & ~(triggered.d32 & ~handled.d32));
-		// Save those that were triggered but not handled
-		gintsts_saved.d32 |= triggered.d32 & ~handled.d32;
-		FIQ_WRITE(dwc_regs_base + 0x18, gintmsk.d32);
-
-		// Clear and save any unhandled interrupts and trigger the interrupt
-		if(gintsts_saved.d32)
-		{
-			/* To enable the MPHI interrupt  (INT 32)
-			 */
-			FIQ_WRITE( c_mphi_regs.outdda, (int) dummy_send);
-			FIQ_WRITE( c_mphi_regs.outddb, (1 << 29));
-
-			mphi_int_count++;
-		}
-	}
-	while(0);
-
-	mb();
-
-	/* exit back to normal mode restoring everything */
-	asm __volatile__ (
-		/* return FIQ regs back to pristine state
-		 * and get normal regs back
-		 */
-		"ldmia	sp!, {r0-r12, lr};"
-
-		/* return */
-		"subs	pc, lr, #4;"
-	);
-}
-
 /** This function handles interrupts for the HCD. */
 int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd)
 {
 	int retval = 0;
 	static int last_time;
-
 	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
 	gintsts_data_t gintsts;
 	gintmsk_data_t gintmsk;
 	hfnum_data_t hfnum;
+	haintmsk_data_t haintmsk;
 
 #ifdef DEBUG
 	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
@@ -516,15 +99,29 @@ int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd)
 	DWC_SPINLOCK(dwc_otg_hcd->lock);
 	/* Check if HOST Mode */
 	if (dwc_otg_is_host_mode(core_if)) {
-		local_fiq_disable();
-		gintmsk.d32 |= gintsts_saved.d32;
-		gintsts.d32 |= gintsts_saved.d32;
-		gintsts_saved.d32 = 0;
-		local_fiq_enable();
+		if (fiq_enable) {
+			local_fiq_disable();
+			/* Pull in from the FIQ's disabled mask */
+			gintmsk.d32 = gintmsk.d32 | ~(dwc_otg_hcd->fiq_state->gintmsk_saved.d32);
+			dwc_otg_hcd->fiq_state->gintmsk_saved.d32 = ~0;
+		}
+
+		if (fiq_fsm_enable && ( 0x0000FFFF & ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint))) {
+			gintsts.b.hcintr = 1;
+		}
+
+		/* Danger will robinson: fake a SOF if necessary */
+		if (fiq_fsm_enable && (dwc_otg_hcd->fiq_state->gintmsk_saved.b.sofintr == 1)) {
+			gintsts.b.sofintr = 1;
+		}
+		gintsts.d32 &= gintmsk.d32;
+		
+		if (fiq_enable)
+			local_fiq_enable();
+
 		if (!gintsts.d32) {
 			goto exit_handler_routine;
 		}
-		gintsts.d32 &= gintmsk.d32;
 
 #ifdef DEBUG
 		// We should be OK doing this because the common interrupts should already have been serviced
@@ -544,12 +141,7 @@ int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd)
 				    gintsts.d32, core_if);
 #endif
 		hfnum.d32 = DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->hfnum);
-		if (gintsts.b.sofintr && g_np_count == g_np_sent && dwc_frame_num_gt(g_next_sched_frame, hfnum.b.frnum))
-		{
-			/* Note, we should never get here if the FIQ is doing it's job properly*/
-			retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
-		}
-		else if (gintsts.b.sofintr) {
+		if (gintsts.b.sofintr) {
 			retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
 		}
 
@@ -604,37 +196,43 @@ int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd)
 	}
 
 exit_handler_routine:
-
-	if (fiq_fix_enable)
-	{
+	if (fiq_enable)	{
+		gintmsk_data_t gintmsk_new;
+		haintmsk_data_t haintmsk_new;
 		local_fiq_disable();
-		// Make sure that we don't clear the interrupt if we've still got pending work to do
-		if(gintsts_saved.d32 == 0)
-		{
-			/* Clear the MPHI interrupt */
-			DWC_WRITE_REG32(c_mphi_regs.intstat, (1<<16));
-			if (mphi_int_count >= 60)
-			{
-				DWC_WRITE_REG32(c_mphi_regs.ctrl, ((1<<31) + (1<<16)));
-				while(!(DWC_READ_REG32(c_mphi_regs.ctrl) & (1 << 17)))
-					;
-				DWC_WRITE_REG32(c_mphi_regs.ctrl, (1<<31));
-				mphi_int_count = 0;
-			}
-			int_done++;
+		gintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->gintmsk_saved.d32;
+		if(fiq_fsm_enable)
+			haintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->haintmsk_saved.d32;
+		else
+			haintmsk_new.d32 = 0x0000FFFF;
+
+		/* The FIQ could have sneaked another interrupt in. If so, don't clear MPHI */
+		if ((gintmsk_new.d32 == ~0) && (haintmsk_new.d32 == 0x0000FFFF)) {
+				DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.intstat, (1<<16));
+				if (dwc_otg_hcd->fiq_state->mphi_int_count >= 50) {
+					fiq_print(FIQDBG_INT, dwc_otg_hcd->fiq_state, "MPHI CLR");
+					DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, ((1<<31) + (1<<16)));
+					while (!(DWC_READ_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & (1 << 17)))
+						;
+					DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, (1<<31));
+					dwc_otg_hcd->fiq_state->mphi_int_count = 0;
+				}
+				int_done++;
 		}
-
-		// Unmask handled interrupts
-		FIQ_WRITE(dwc_regs_base + 0x18, gintmsk.d32);
-		//DWC_MODIFY_REG32((uint32_t *)IO_ADDRESS(USB_BASE + 0x8), 0 , 1);
-
+		haintmsk.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk);
+		/* Re-enable interrupts that the FIQ masked (first time round) */
+		FIQ_WRITE(dwc_otg_hcd->fiq_state->dwc_regs_base + GINTMSK, gintmsk.d32);
 		local_fiq_enable();
 
-		if((jiffies / HZ) > last_time)
-		{
+		if ((jiffies / HZ) > last_time) {
+			//dwc_otg_qh_t *qh;
+			//dwc_list_link_t *cur;
 			/* Once a second output the fiq and irq numbers, useful for debug */
 			last_time = jiffies / HZ;
-			DWC_DEBUGPL(DBG_USER, "int_done = %d fiq_done = %d\n", int_done, fiq_done);
+		//	 DWC_WARN("np_kick=%d AHC=%d sched_frame=%d cur_frame=%d int_done=%d fiq_done=%d",
+		//	dwc_otg_hcd->fiq_state->kick_np_queues, dwc_otg_hcd->available_host_channels,
+		//	dwc_otg_hcd->fiq_state->next_sched_frame, hfnum.b.frnum, int_done, dwc_otg_hcd->fiq_state->fiq_done);
+			 //printk(KERN_WARNING "Periodic queues:\n");
 		}
 	}
 
@@ -686,6 +284,7 @@ static inline void track_missed_sofs(uint16_t curr_frame_number)
 int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd)
 {
 	hfnum_data_t hfnum;
+	gintsts_data_t gintsts = { .d32 = 0 };
 	dwc_list_link_t *qh_entry;
 	dwc_otg_qh_t *qh;
 	dwc_otg_transaction_type_e tr_type;
@@ -732,8 +331,8 @@ int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd)
 			}
 		}
 	}
-
-	g_next_sched_frame = next_sched_frame;
+	if (fiq_enable)
+		hcd->fiq_state->next_sched_frame = next_sched_frame;
 
 	tr_type = dwc_otg_hcd_select_transactions(hcd);
 	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
@@ -741,10 +340,11 @@ int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd)
 		did_something = 1;
 	}
 
-	/* Clear interrupt */
-	gintsts.b.sofintr = 1;
-	DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
-
+	/* Clear interrupt - but do not trample on the FIQ sof */
+	if (!fiq_fsm_enable) {
+		gintsts.b.sofintr = 1;
+		DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
+	}
 	return 1;
 }
 
@@ -1020,19 +620,21 @@ int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd)
 {
 	int i;
 	int retval = 0;
-	haint_data_t haint;
+	haint_data_t haint = { .d32 = 0 } ;
 
 	/* Clear appropriate bits in HCINTn to clear the interrupt bit in
 	 * GINTSTS */
 
-	haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
+	if (!fiq_fsm_enable)
+		haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
 
 	// Overwrite with saved interrupts from fiq handler
-	if(fiq_split_enable)
+	if(fiq_fsm_enable)
 	{
+		/* check the mask? */
 		local_fiq_disable();
-		haint.d32 = haint_saved.d32;
-		haint_saved.d32 = 0;
+		haint.b2.chint |= ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint);
+		dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint = ~0;
 		local_fiq_enable();
 	}
 
@@ -1076,9 +678,7 @@ static uint32_t get_actual_xfer_length(dwc_hc_t * hc,
 				*short_read = (hctsiz.b.xfersize != 0);
 			}
 		} else if (hc->qh->do_split) {
-			if(fiq_split_enable)
-				length = split_out_xfersize[hc->hc_num];
-			else
+				//length = split_out_xfersize[hc->hc_num];
 				length = qtd->ssplit_out_xfer_count;
 		} else {
 			length = hc->xfer_len;
@@ -1325,19 +925,17 @@ static void release_channel(dwc_otg_hcd_t * hcd,
 	int free_qtd;
 	dwc_irqflags_t flags;
 	dwc_spinlock_t *channel_lock = hcd->channel_lock;
-#ifdef FIQ_DEBUG
-	int endp = qtd->urb ? qtd->urb->pipe_info.ep_num : 0;
-#endif
+
 	int hog_port = 0;
 
 	DWC_DEBUGPL(DBG_HCDV, "  %s: channel %d, halt_status %d, xfer_len %d\n",
 		    __func__, hc->hc_num, halt_status, hc->xfer_len);
 
-	if(fiq_split_enable && hc->do_split) {
+	if(fiq_fsm_enable && hc->do_split) {
 		if(!hc->ep_is_in && hc->ep_type == UE_ISOCHRONOUS) {
 			if(hc->xact_pos == DWC_HCSPLIT_XACTPOS_MID ||
 					hc->xact_pos == DWC_HCSPLIT_XACTPOS_BEGIN) {
-				hog_port = 1;
+				hog_port = 0;
 			}
 		}
 	}
@@ -1394,6 +992,8 @@ cleanup:
 	 * function clears the channel interrupt enables and conditions, so
 	 * there's no need to clear the Channel Halted interrupt separately.
 	 */
+	if (fiq_fsm_enable && hcd->fiq_state->channel[hc->hc_num].fsm != FIQ_PASSTHROUGH)
+		dwc_otg_cleanup_fiq_channel(hcd, hc->hc_num);
 	dwc_otg_hc_cleanup(hcd->core_if, hc);
 	DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
 
@@ -1416,27 +1016,10 @@ cleanup:
 
 		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
 		hcd->available_host_channels++;
-		fiq_print(FIQDBG_PORTHUB, "AHC = %d ", hcd->available_host_channels);
+		fiq_print(FIQDBG_INT, hcd->fiq_state, "AHC = %d ", hcd->available_host_channels);
 		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
 	}
 
-	if(fiq_split_enable && hc->do_split)
-	{
-		if(!(hcd->hub_port[hc->hub_addr] & (1 << hc->port_addr)))
-		{
-			fiq_print(FIQDBG_ERR, "PRTNOTAL");
-			//BUG();
-		}
-		if(!hog_port && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC ||
-				hc->ep_type == DWC_OTG_EP_TYPE_INTR)) {
-			hcd->hub_port[hc->hub_addr] &= ~(1 << hc->port_addr);
-#ifdef FIQ_DEBUG
-			hcd->hub_port_alloc[hc->hub_addr * 16 + hc->port_addr] = -1;
-#endif
-			fiq_print(FIQDBG_PORTHUB, "H%dP%d:RR%d", hc->hub_addr, hc->port_addr, endp);
-		}
-	}
-
 	/* Try to queue more transfers now that there's a free channel. */
 	tr_type = dwc_otg_hcd_select_transactions(hcd);
 	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
@@ -1858,7 +1441,7 @@ static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd,
 	switch(dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
 		case UE_BULK:
 		case UE_CONTROL:
-		if (nak_holdoff_enable)
+		if (nak_holdoff && qtd->qh->do_split)
 			hc->qh->nak_frame = dwc_otg_hcd_get_frame_number(hcd);
 	}
 
@@ -2074,7 +1657,7 @@ static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd,
 			// With the FIQ running we only ever see the failed NYET
 			if (dwc_full_frame_num(frnum) !=
 			    dwc_full_frame_num(hc->qh->sched_frame) ||
-			    fiq_split_enable) {
+			    fiq_fsm_enable) {
 				/*
 				 * No longer in the same full speed frame.
 				 * Treat this as a transaction error.
@@ -2460,12 +2043,11 @@ static inline int halt_status_ok(dwc_otg_hcd_t * hcd,
 static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd,
 				      dwc_hc_t * hc,
 				      dwc_otg_hc_regs_t * hc_regs,
-				      dwc_otg_qtd_t * qtd,
-				      hcint_data_t hcint,
-				      hcintmsk_data_t hcintmsk)
+				      dwc_otg_qtd_t * qtd)
 {
 	int out_nak_enh = 0;
-
+	hcint_data_t hcint;
+	hcintmsk_data_t hcintmsk;
 	/* For core with OUT NAK enhancement, the flow for high-
 	 * speed CONTROL/BULK OUT is handled a little differently.
 	 */
@@ -2495,11 +2077,9 @@ static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd,
 	}
 
 	/* Read the HCINTn register to determine the cause for the halt. */
-	if(!fiq_split_enable)
-	{
-		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-		hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
-	}
+
+	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
+	hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
 
 	if (hcint.b.xfercomp) {
 		/** @todo This is here because of a possible hardware bug.  Spec
@@ -2624,15 +2204,13 @@ static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd,
 static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd,
 				     dwc_hc_t * hc,
 				     dwc_otg_hc_regs_t * hc_regs,
-				     dwc_otg_qtd_t * qtd,
-				     hcint_data_t hcint,
-				     hcintmsk_data_t hcintmsk)
+				     dwc_otg_qtd_t * qtd)
 {
 	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
 		    "Channel Halted--\n", hc->hc_num);
 
 	if (hcd->core_if->dma_enable) {
-		handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd, hcint, hcintmsk);
+		handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
 	} else {
 #ifdef DEBUG
 		if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
@@ -2645,11 +2223,372 @@ static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd,
 	return 1;
 }
 
+
+/**
+ * dwc_otg_fiq_unmangle_isoc() - Update the iso_frame_desc structure on
+ * FIQ transfer completion
+ * @hcd:	Pointer to dwc_otg_hcd struct
+ * @num:	Host channel number
+ *
+ * 1. Un-mangle the status as recorded in each iso_frame_desc status
+ * 2. Copy it from the dwc_otg_urb into the real URB
+ */
+void dwc_otg_fiq_unmangle_isoc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num)
+{
+	struct dwc_otg_hcd_urb *dwc_urb = qtd->urb;
+	int nr_frames = dwc_urb->packet_count;
+	int i;
+	hcint_data_t frame_hcint;
+
+	for (i = 0; i < nr_frames; i++) {
+		frame_hcint.d32 = dwc_urb->iso_descs[i].status;
+		if (frame_hcint.b.xfercomp) {
+			dwc_urb->iso_descs[i].status = 0;
+			dwc_urb->actual_length += dwc_urb->iso_descs[i].actual_length;
+		} else if (frame_hcint.b.frmovrun) {
+			if (qh->ep_is_in)
+				dwc_urb->iso_descs[i].status = -DWC_E_NO_STREAM_RES;
+			else
+				dwc_urb->iso_descs[i].status = -DWC_E_COMMUNICATION;
+			dwc_urb->error_count++;
+			dwc_urb->iso_descs[i].actual_length = 0;
+		} else if (frame_hcint.b.xacterr) {
+			dwc_urb->iso_descs[i].status = -DWC_E_PROTOCOL;
+			dwc_urb->error_count++;
+			dwc_urb->iso_descs[i].actual_length = 0;
+		} else if (frame_hcint.b.bblerr) {
+			dwc_urb->iso_descs[i].status = -DWC_E_OVERFLOW;
+			dwc_urb->error_count++;
+			dwc_urb->iso_descs[i].actual_length = 0;
+		} else {
+			/* Something went wrong */
+			dwc_urb->iso_descs[i].status = -1;
+			dwc_urb->iso_descs[i].actual_length = 0;
+			dwc_urb->error_count++;
+		}
+	}
+	//printk_ratelimited(KERN_INFO "%s: HS isochronous of %d/%d frames with %d errors complete\n",
+	//			__FUNCTION__, i, dwc_urb->packet_count, dwc_urb->error_count);
+	hcd->fops->complete(hcd, dwc_urb->priv, dwc_urb, 0);
+	release_channel(hcd, qh->channel, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
+}
+
+/**
+ * dwc_otg_fiq_unsetup_per_dma() - Remove data from bounce buffers for split transactions
+ * @hcd:	Pointer to dwc_otg_hcd struct
+ * @num:	Host channel number
+ *
+ * Copies data from the FIQ bounce buffers into the URB's transfer buffer. Does not modify URB state.
+ * Returns total length of data or -1 if the buffers were not used.
+ *
+ */
+int dwc_otg_fiq_unsetup_per_dma(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num)
+{
+	dwc_hc_t *hc = qh->channel;
+	struct fiq_dma_blob *blob = hcd->fiq_dmab;
+	struct fiq_channel_state *st = &hcd->fiq_state->channel[num];
+	uint8_t *ptr = NULL;
+	int index = 0, len = 0;
+	int i = 0;
+	if (hc->ep_is_in) {
+		/* Copy data out of the DMA bounce buffers to the URB's buffer.
+		 * The align_buf is ignored as this is ignored on FSM enqueue. */
+		ptr = qtd->urb->buf;
+		if (qh->ep_type == UE_ISOCHRONOUS) {
+			/* Isoc IN transactions - grab the offset of the iso_frame_desc into the URB transfer buffer */
+			index = qtd->isoc_frame_index;
+			ptr += qtd->urb->iso_descs[index].offset;
+		} else {
+			/* Need to increment by actual_length for interrupt IN */
+			ptr += qtd->urb->actual_length;
+		}
+
+		for (i = 0; i < st->dma_info.index; i++) {
+			len += st->dma_info.slot_len[i];
+			dwc_memcpy(ptr, &blob->channel[num].index[i].buf[0], st->dma_info.slot_len[i]);
+			ptr += st->dma_info.slot_len[i];
+		}
+		return len;
+	} else {
+		/* OUT endpoints - nothing to do. */
+		return -1;
+	}
+
+}
+/**
+ * dwc_otg_hcd_handle_hc_fsm() - handle an unmasked channel interrupt
+ * 				 from a channel handled in the FIQ
+ * @hcd:	Pointer to dwc_otg_hcd struct
+ * @num:	Host channel number
+ *
+ * If a host channel interrupt was received by the IRQ and this was a channel
+ * used by the FIQ, the execution flow for transfer completion is substantially
+ * different from the normal (messy) path. This function and its friends handles
+ * channel cleanup and transaction completion from a FIQ transaction.
+ */
+int32_t dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd_t *hcd, uint32_t num)
+{
+	struct fiq_channel_state *st = &hcd->fiq_state->channel[num];
+	dwc_hc_t *hc = hcd->hc_ptr_array[num];
+	dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list);
+	dwc_otg_qh_t *qh = hc->qh;
+	dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[num];
+	hcint_data_t hcint = hcd->fiq_state->channel[num].hcint_copy;
+	int hostchannels  = 0;
+	int ret = 0;
+	fiq_print(FIQDBG_INT, hcd->fiq_state, "OUT %01d %01d ", num , st->fsm);
+
+	hostchannels = hcd->available_host_channels;
+	switch (st->fsm) {
+	case FIQ_TEST:
+		break;
+
+	case FIQ_DEQUEUE_ISSUED:
+		/* hc_halt was called. QTD no longer exists. */
+		/* TODO: for a nonperiodic split transaction, need to issue a
+		 * CLEAR_TT_BUFFER hub command if we were in the start-split phase.
+		 */
+		release_channel(hcd, hc, NULL, hc->halt_status);
+		ret = 1;
+		break;
+
+	case FIQ_NP_SPLIT_DONE:
+		/* Nonperiodic transaction complete. */
+		if (!hc->ep_is_in) {
+			qtd->ssplit_out_xfer_count = hc->xfer_len;
+		}
+		if (hcint.b.xfercomp) {
+			handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
+		} else if (hcint.b.nak) {
+			handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
+		}
+		ret = 1;
+		break;
+
+	case FIQ_NP_SPLIT_HS_ABORTED:
+		/* A HS abort is a 3-strikes on the HS bus at any point in the transaction.
+		 * Normally a CLEAR_TT_BUFFER hub command would be required: we can't do that
+		 * because there's no guarantee which order a non-periodic split happened in.
+		 * We could end up clearing a perfectly good transaction out of the buffer.
+		 */
+		if (hcint.b.xacterr) {
+			qtd->error_count += st->nr_errors;
+			handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
+		} else if (hcint.b.ahberr) {
+			handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd);
+		} else {
+			local_fiq_disable();
+			BUG();
+		}
+		break;
+
+	case FIQ_NP_SPLIT_LS_ABORTED:
+		/* A few cases can cause this - either an unknown state on a SSPLIT or
+		 * STALL/data toggle error response on a CSPLIT */
+		if (hcint.b.stall) {
+			handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
+		} else if (hcint.b.datatglerr) {
+			handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd);
+		} else if (hcint.b.bblerr) {
+			handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
+		} else if (hcint.b.ahberr) {
+			handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd);
+		} else {
+			local_fiq_disable();
+			BUG();
+		}
+		break;
+
+	case FIQ_PER_SPLIT_DONE:
+		/* Isoc IN or Interrupt IN/OUT */
+
+		/* Flow control here is different from the normal execution by the driver.
+		* We need to completely ignore most of the driver's method of handling
+		* split transactions and do it ourselves.
+		*/
+		if (hc->ep_type == UE_INTERRUPT) {
+			if (hcint.b.nak) {
+					handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
+			} else if (hc->ep_is_in) {
+				int len;
+				len = dwc_otg_fiq_unsetup_per_dma(hcd, hc->qh, qtd, num);
+				//printk(KERN_NOTICE "FIQ Transaction: hc=%d len=%d urb_len = %d\n", num, len, qtd->urb->length);
+				qtd->urb->actual_length += len;
+				if (qtd->urb->actual_length >= qtd->urb->length) {
+					qtd->urb->status = 0;
+					hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status);
+					release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
+				} else {
+					/* Interrupt transfer not complete yet - is it a short read? */
+					if (len < hc->max_packet) {
+						/* Interrupt transaction complete */
+						qtd->urb->status = 0;
+						hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status);
+						release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
+					} else {
+						/* Further transactions required */
+						release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
+					}
+				}
+			} else {
+				/* Interrupt OUT complete. */
+				dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
+				qtd->urb->actual_length += hc->xfer_len;
+				if (qtd->urb->actual_length >= qtd->urb->length) {
+					qtd->urb->status = 0;
+					hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status);
+					release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
+				} else {
+					release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
+				}
+			}
+		} else {
+			/* ISOC IN complete. */
+			struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
+			int len = 0;
+			/* Record errors, update qtd. */
+			if (st->nr_errors) {
+				frame_desc->actual_length = 0;
+				frame_desc->status = -DWC_E_PROTOCOL;
+			} else {
+				frame_desc->status = 0;
+				/* Unswizzle dma */
+				len = dwc_otg_fiq_unsetup_per_dma(hcd, qh, qtd, num);
+				frame_desc->actual_length = len;
+			}
+			qtd->isoc_frame_index++;
+			if (qtd->isoc_frame_index == qtd->urb->packet_count) {
+				hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
+				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
+			} else {
+				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
+			}
+		}
+		break;
+
+	case FIQ_PER_ISO_OUT_DONE: {
+			struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
+			/* Record errors, update qtd. */
+			if (st->nr_errors) {
+				frame_desc->actual_length = 0;
+				frame_desc->status = -DWC_E_PROTOCOL;
+			} else {
+				frame_desc->status = 0;
+				frame_desc->actual_length = frame_desc->length;
+			}
+			qtd->isoc_frame_index++;
+			qtd->isoc_split_offset = 0;
+			if (qtd->isoc_frame_index == qtd->urb->packet_count) {
+				hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
+				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
+			} else {
+				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
+			}
+		}
+		break;
+
+	case FIQ_PER_SPLIT_NYET_ABORTED:
+		/* Doh. lost the data. */
+		printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed "
+				"- FIQ reported NYET. Data may have been lost.\n",
+				hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3);
+		if (hc->ep_type == UE_ISOCHRONOUS) {
+			struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
+			/* Record errors, update qtd. */
+			frame_desc->actual_length = 0;
+			frame_desc->status = -DWC_E_PROTOCOL;
+			qtd->isoc_frame_index++;
+			qtd->isoc_split_offset = 0;
+			if (qtd->isoc_frame_index == qtd->urb->packet_count) {
+				hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
+				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
+			} else {
+				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
+			}
+		} else {
+			release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
+		}
+		break;
+
+	case FIQ_HS_ISOC_DONE:
+		/* The FIQ has performed a whole pile of isochronous transactions.
+		 * The status is recorded as the interrupt state should the transaction
+		 * fail.
+		 */
+		dwc_otg_fiq_unmangle_isoc(hcd, qh, qtd, num);
+		break;
+
+	case FIQ_PER_SPLIT_LS_ABORTED:
+		if (hcint.b.xacterr) {
+			/* Hub has responded with an ERR packet. Device
+			 * has been unplugged or the port has been disabled.
+			 * TODO: need to issue a reset to the hub port. */
+			qtd->error_count += 3;
+			handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
+		} else if (hcint.b.stall) {
+			handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
+		} else if (hcint.b.bblerr) {
+			handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
+		} else {
+			printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x failed "
+				"- FIQ reported FSM=%d. Data may have been lost.\n",
+				st->fsm, hc->dev_addr, hc->ep_num);
+			release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
+		}
+		break;
+
+	case FIQ_PER_SPLIT_HS_ABORTED:
+		/* Either the SSPLIT phase suffered transaction errors or something
+		 * unexpected happened.
+		 */
+		qtd->error_count += 3;
+		handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
+		release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
+		break;
+
+	case FIQ_PER_SPLIT_TIMEOUT:
+		/* Couldn't complete in the nominated frame */
+		printk(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed "
+				"- FIQ timed out. Data may have been lost.\n",
+				hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3);
+		if (hc->ep_type == UE_ISOCHRONOUS) {
+			struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
+			/* Record errors, update qtd. */
+			frame_desc->actual_length = 0;
+			if (hc->ep_is_in) {
+				frame_desc->status = -DWC_E_NO_STREAM_RES;
+			} else {
+				frame_desc->status = -DWC_E_COMMUNICATION;
+			}
+			qtd->isoc_frame_index++;
+			if (qtd->isoc_frame_index == qtd->urb->packet_count) {
+				hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
+				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
+			} else {
+				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
+			}
+		} else {
+			release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
+		}
+		break;
+
+	default:
+		local_fiq_disable();
+		DWC_WARN("unexpected state received on hc=%d fsm=%d", hc->hc_num, st->fsm);
+		BUG();
+	}
+	//if (hostchannels != hcd->available_host_channels) {
+		/* should have incremented by now! */
+	//	BUG();
+//	}
+	return ret;
+}
+
 /** Handles interrupt for a specific Host Channel */
 int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num)
 {
 	int retval = 0;
-	hcint_data_t hcint, hcint_orig;
+	hcint_data_t hcint;
 	hcintmsk_data_t hcintmsk;
 	dwc_hc_t *hc;
 	dwc_otg_hc_regs_t *hc_regs;
@@ -2668,24 +2607,32 @@ int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num)
 	}
 	qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list);
 
+	/*
+	 * FSM mode: Check to see if this is a HC interrupt from a channel handled by the FIQ.
+	 * Execution path is fundamentally different for the channels after a FIQ has completed
+	 * a split transaction.
+	 */
+	if (fiq_fsm_enable) {
+		switch (dwc_otg_hcd->fiq_state->channel[num].fsm) {
+			case FIQ_PASSTHROUGH:
+				break;
+			case FIQ_PASSTHROUGH_ERRORSTATE:
+				/* Hook into the error count */
+				fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "HCDERR%02d", num);
+				if (dwc_otg_hcd->fiq_state->channel[num].nr_errors) {
+					qtd->error_count = 0;
+					fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "RESET   ");
+				}
+				break;
+			default:
+				dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd, num);
+				return 1;
+		}
+	}
+
 	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-	hcint_orig = hcint;
 	hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
-	DWC_DEBUGPL(DBG_HCDV,
-		    "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
-		    hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
 	hcint.d32 = hcint.d32 & hcintmsk.d32;
-
-	if(fiq_split_enable)
-	{
-		// replace with the saved interrupts from the fiq handler
-		local_fiq_disable();
-		hcint_orig.d32 = hcint_saved[num].d32;
-		hcint.d32 = hcint_orig.d32 & hcintmsk_saved[num].d32;
-		hcint_saved[num].d32 = 0;
-		local_fiq_enable();
-	}
-
 	if (!dwc_otg_hcd->core_if->dma_enable) {
 		if (hcint.b.chhltd && hcint.d32 != 0x2) {
 			hcint.b.chhltd = 0;
@@ -2703,7 +2650,7 @@ int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num)
 		hcint.b.nyet = 0;
 	}
 	if (hcint.b.chhltd) {
-		retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd, hcint_orig, hcintmsk_saved[num]);
+		retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
 	}
 	if (hcint.b.ahberr) {
 		retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
index ee8eec9..07b1808 100644
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
@@ -58,6 +58,7 @@
 #else
 #include <linux/usb/hcd.h>
 #endif
+#include <asm/bug.h>
 
 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
 #define USB_URB_EP_LINKING 1
@@ -69,7 +70,8 @@
 #include "dwc_otg_dbg.h"
 #include "dwc_otg_driver.h"
 #include "dwc_otg_hcd.h"
-#include "dwc_otg_mphi_fix.h"
+
+extern unsigned char  _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end;
 
 /**
  * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
@@ -80,7 +82,7 @@
 
 static const char dwc_otg_hcd_name[] = "dwc_otg_hcd";
 
-extern bool fiq_fix_enable;
+extern bool fiq_enable;
 
 /** @name Linux HC Driver API Functions */
 /** @{ */
@@ -351,7 +353,6 @@ static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle,
 					   urb);
 		}
 	}
-
 	DWC_FREE(dwc_otg_urb);
 	if (!new_entry) {
 		DWC_ERROR("dwc_otg_hcd: complete: cannot allocate URB TQ entry\n");
@@ -395,13 +396,9 @@ static struct dwc_otg_hcd_function_ops hcd_fops = {
 static struct fiq_handler fh = {
   .name = "usb_fiq",
 };
-struct fiq_stack_s {
-	int magic1;
-	uint8_t stack[2048];
-	int magic2;
-} fiq_stack;
 
-extern mphi_regs_t c_mphi_regs;
+
+
 /**
  * Initializes the HCD. This function allocates memory for and initializes the
  * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
@@ -433,20 +430,6 @@ int hcd_init(dwc_bus_dev_t *_dev)
         pci_set_consistent_dma_mask(_dev, dmamask);
 #endif
 
-	if (fiq_fix_enable)
-	{
-		// Set up fiq
-		claim_fiq(&fh);
-		set_fiq_handler(__FIQ_Branch, 4);
-		memset(&regs,0,sizeof(regs));
-		regs.ARM_r8 = (long)dwc_otg_hcd_handle_fiq;
-		regs.ARM_r9 = (long)0;
-		regs.ARM_sp = (long)fiq_stack.stack + sizeof(fiq_stack.stack) - 4;
-		set_fiq_regs(&regs);
-		fiq_stack.magic1 = 0xdeadbeef;
-		fiq_stack.magic2 = 0xaa995566;
-	}
-
 	/*
 	 * Allocate memory for the base HCD plus the DWC OTG HCD.
 	 * Initialize the base HCD.
@@ -466,30 +449,7 @@ int hcd_init(dwc_bus_dev_t *_dev)
 
 	hcd->regs = otg_dev->os_dep.base;
 
-	if (fiq_fix_enable)
-	{
-		volatile extern void *dwc_regs_base;
-
-		//Set the mphi periph to  the required registers
-		c_mphi_regs.base    = otg_dev->os_dep.mphi_base;
-		c_mphi_regs.ctrl    = otg_dev->os_dep.mphi_base + 0x4c;
-		c_mphi_regs.outdda  = otg_dev->os_dep.mphi_base + 0x28;
-		c_mphi_regs.outddb  = otg_dev->os_dep.mphi_base + 0x2c;
-		c_mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50;
-
-		dwc_regs_base = otg_dev->os_dep.base;
 
-		//Enable mphi peripheral
-		writel((1<<31),c_mphi_regs.ctrl);
-#ifdef DEBUG
-		if (readl(c_mphi_regs.ctrl) & 0x80000000)
-			DWC_DEBUGPL(DBG_USER, "MPHI periph has been enabled\n");
-		else
-			DWC_DEBUGPL(DBG_USER, "MPHI periph has NOT been enabled\n");
-#endif
-		// Enable FIQ interrupt from USB peripheral
-		enable_fiq(INTERRUPT_VC_USB);
-	}
 	/* Initialize the DWC OTG HCD. */
 	dwc_otg_hcd = dwc_otg_hcd_alloc_hcd();
 	if (!dwc_otg_hcd) {
@@ -503,6 +463,55 @@ int hcd_init(dwc_bus_dev_t *_dev)
 		goto error2;
 	}
 
+	if (fiq_enable)
+	{
+		if (claim_fiq(&fh)) {
+			DWC_ERROR("Can't claim FIQ");
+			goto error2;
+		}
+
+		DWC_WARN("FIQ at 0x%08x", (fiq_fsm_enable ? (int)&dwc_otg_fiq_fsm : (int)&dwc_otg_fiq_nop));
+		DWC_WARN("FIQ ASM at 0x%08x length %d", (int)&_dwc_otg_fiq_stub, (int)(&_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub));
+
+		set_fiq_handler((void *) &_dwc_otg_fiq_stub, &_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub);
+		memset(&regs,0,sizeof(regs));
+
+		regs.ARM_r8 = (long) dwc_otg_hcd->fiq_state;
+		if (fiq_fsm_enable) {
+			regs.ARM_r9 = dwc_otg_hcd->core_if->core_params->host_channels;
+			//regs.ARM_r10 = dwc_otg_hcd->dma;
+			regs.ARM_fp = (long) dwc_otg_fiq_fsm;
+		} else {
+			regs.ARM_fp = (long) dwc_otg_fiq_nop;
+		}
+
+		regs.ARM_sp = (long) dwc_otg_hcd->fiq_stack + (sizeof(struct fiq_stack) - 4);
+
+//		__show_regs(&regs);
+		set_fiq_regs(&regs);
+
+		//Set the mphi periph to  the required registers
+		dwc_otg_hcd->fiq_state->mphi_regs.base    = otg_dev->os_dep.mphi_base;
+		dwc_otg_hcd->fiq_state->mphi_regs.ctrl    = otg_dev->os_dep.mphi_base + 0x4c;
+		dwc_otg_hcd->fiq_state->mphi_regs.outdda  = otg_dev->os_dep.mphi_base + 0x28;
+		dwc_otg_hcd->fiq_state->mphi_regs.outddb  = otg_dev->os_dep.mphi_base + 0x2c;
+		dwc_otg_hcd->fiq_state->mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50;
+		dwc_otg_hcd->fiq_state->dwc_regs_base = otg_dev->os_dep.base;
+		DWC_WARN("MPHI regs_base at 0x%08x", (int)dwc_otg_hcd->fiq_state->mphi_regs.base);
+		//Enable mphi peripheral
+		writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl);
+#ifdef DEBUG
+		if (readl(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & 0x80000000)
+			DWC_WARN("MPHI periph has been enabled");
+		else
+			DWC_WARN("MPHI periph has NOT been enabled");
+#endif
+		// Enable FIQ interrupt from USB peripheral
+		enable_fiq(INTERRUPT_VC_USB);
+		local_fiq_enable();
+	}
+
+
 	otg_dev->hcd->otg_dev = otg_dev;
 	hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd);
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel)
@@ -518,9 +527,9 @@ int hcd_init(dwc_bus_dev_t *_dev)
 	 * IRQ line, and calls hcd_start method.
 	 */
 #ifdef PLATFORM_INTERFACE
-        retval = usb_add_hcd(hcd, platform_get_irq(_dev, 0), IRQF_SHARED | IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, platform_get_irq(_dev, fiq_enable ? 0 : 1), IRQF_SHARED | IRQF_DISABLED);
 #else
-        retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED | IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED | IRQF_DISABLED);	
 #endif
 	if (retval < 0) {
 		goto error2;
@@ -617,9 +626,13 @@ void hcd_stop(struct usb_hcd *hcd)
 /** Returns the current frame number. */
 static int get_frame_number(struct usb_hcd *hcd)
 {
+	hprt0_data_t hprt0;
 	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-
-	return dwc_otg_hcd_get_frame_number(dwc_otg_hcd);
+	hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
+	if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
+		return dwc_otg_hcd_get_frame_number(dwc_otg_hcd) >> 3;
+	else
+		return dwc_otg_hcd_get_frame_number(dwc_otg_hcd);
 }
 
 #ifdef DEBUG
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
index db95851..8706a5c 100644
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
@@ -41,7 +41,6 @@
 
 #include "dwc_otg_hcd.h"
 #include "dwc_otg_regs.h"
-#include "dwc_otg_mphi_fix.h"
 
 extern bool microframe_schedule;
 
@@ -576,7 +575,6 @@ static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
 }
 
 
-extern int g_next_sched_frame, g_np_count, g_np_sent;
 
 /**
  * Schedules an interrupt or isochronous transfer in the periodic schedule.
@@ -636,9 +634,9 @@ static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
 		DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry);
 	}
 	else {
-		if(DWC_LIST_EMPTY(&hcd->periodic_sched_inactive) || dwc_frame_num_le(qh->sched_frame, g_next_sched_frame))
+		if(fiq_enable && (DWC_LIST_EMPTY(&hcd->periodic_sched_inactive) || dwc_frame_num_le(qh->sched_frame, hcd->fiq_state->next_sched_frame)))
 		{
-			g_next_sched_frame = qh->sched_frame;
+			hcd->fiq_state->next_sched_frame = qh->sched_frame;
 
 		}
 		/* Always start in the inactive schedule. */
@@ -679,7 +677,7 @@ int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
 		/* Always start in the inactive schedule. */
 		DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive,
 				     &qh->qh_list_entry);
-		g_np_count++;
+		//hcd->fiq_state->kick_np_queues = 1;
 	} else {
 		status = schedule_periodic(hcd, qh);
 		if ( !hcd->periodic_qh_count ) {
@@ -739,13 +737,12 @@ void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
 			    hcd->non_periodic_qh_ptr->next;
 		}
 		DWC_LIST_REMOVE_INIT(&qh->qh_list_entry);
-
-		// If we've removed the last non-periodic entry then there are none left!
-		g_np_count = g_np_sent;
+		//if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive))
+		//	hcd->fiq_state->kick_np_queues = 1;
 	} else {
 		deschedule_periodic(hcd, qh);
 		hcd->periodic_qh_count--;
-		if( !hcd->periodic_qh_count ) {
+		if( !hcd->periodic_qh_count && !fiq_fsm_enable ) {
 			intr_mask.b.sofintr = 1;
 				DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk,
 									intr_mask.d32, 0);
@@ -770,28 +767,11 @@ void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
 			       int sched_next_periodic_split)
 {
 	if (dwc_qh_is_non_per(qh)) {
-
-		dwc_otg_qh_t *qh_tmp;
-		dwc_list_link_t *qh_list;
-		DWC_LIST_FOREACH(qh_list, &hcd->non_periodic_sched_inactive)
-		{
-			qh_tmp = DWC_LIST_ENTRY(qh_list, struct dwc_otg_qh, qh_list_entry);
-			if(qh_tmp == qh)
-			{
-				/*
-				 *  FIQ is being disabled because this one nevers gets a np_count increment
-				 *  This is still not absolutely correct, but it should fix itself with
-				 *  just an unnecessary extra interrupt
-				 */
-				g_np_sent = g_np_count;
-			}
-		}
-
-
 		dwc_otg_hcd_qh_remove(hcd, qh);
 		if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
 			/* Add back to inactive non-periodic schedule. */
 			dwc_otg_hcd_qh_add(hcd, qh);
+			//hcd->fiq_state->kick_np_queues = 1;
 		}
 	} else {
 		uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd);
@@ -850,9 +830,9 @@ void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
 				DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready,
 						   &qh->qh_list_entry);
 			} else {
-				if(!dwc_frame_num_le(g_next_sched_frame, qh->sched_frame))
+				if(fiq_enable && !dwc_frame_num_le(hcd->fiq_state->next_sched_frame, qh->sched_frame))
 				{
-					g_next_sched_frame = qh->sched_frame;
+					hcd->fiq_state->next_sched_frame = qh->sched_frame;
 				}
 
 				DWC_LIST_MOVE_HEAD
@@ -943,6 +923,9 @@ int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd,
 		if (*qh == NULL) {
 			retval = -DWC_E_NO_MEMORY;
 			goto done;
+		} else {
+			if (fiq_enable)
+				hcd->fiq_state->kick_np_queues = 1;
 		}
 	}
 	retval = dwc_otg_hcd_qh_add(hcd, *qh);
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c b/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c
deleted file mode 100755
index 50b94a8..0000000
--- a/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#include "dwc_otg_regs.h"
-#include "dwc_otg_dbg.h"
-
-void dwc_debug_print_core_int_reg(gintsts_data_t gintsts, const char* function_name)
-{
-	DWC_DEBUGPL(DBG_USER,   "*** Debugging from within the %s  function: ***\n"
-				"curmode:     %1i    Modemismatch: %1i    otgintr:    %1i    sofintr:    %1i\n"
-				"rxstsqlvl:   %1i    nptxfempty  : %1i    ginnakeff:  %1i    goutnakeff: %1i\n"
-				"ulpickint:   %1i    i2cintr:      %1i    erlysuspend:%1i    usbsuspend: %1i\n"
-				"usbreset:    %1i    enumdone:     %1i    isooutdrop: %1i    eopframe:   %1i\n"
-				"restoredone: %1i    epmismatch:   %1i    inepint:    %1i    outepintr:  %1i\n"
-				"incomplisoin:%1i    incomplisoout:%1i    fetsusp:    %1i    resetdet:   %1i\n"
-				"portintr:    %1i    hcintr:       %1i    ptxfempty:  %1i    lpmtranrcvd:%1i\n"
-				"conidstschng:%1i    disconnect:   %1i    sessreqintr:%1i    wkupintr:   %1i\n",
-				function_name,
-				gintsts.b.curmode,
-				gintsts.b.modemismatch,
-				gintsts.b.otgintr,
-				gintsts.b.sofintr,
-				gintsts.b.rxstsqlvl,
-				gintsts.b.nptxfempty,
-				gintsts.b.ginnakeff,
-				gintsts.b.goutnakeff,
-				gintsts.b.ulpickint,
-				gintsts.b.i2cintr,
-				gintsts.b.erlysuspend,
-				gintsts.b.usbsuspend,
-				gintsts.b.usbreset,
-				gintsts.b.enumdone,
-				gintsts.b.isooutdrop,
-				gintsts.b.eopframe,
-				gintsts.b.restoredone,
-				gintsts.b.epmismatch,
-				gintsts.b.inepint,
-				gintsts.b.outepintr,
-				gintsts.b.incomplisoin,
-				gintsts.b.incomplisoout,
-				gintsts.b.fetsusp,
-				gintsts.b.resetdet,
-				gintsts.b.portintr,
-				gintsts.b.hcintr,
-				gintsts.b.ptxfempty,
-				gintsts.b.lpmtranrcvd,
-				gintsts.b.conidstschng,
-				gintsts.b.disconnect,
-				gintsts.b.sessreqintr,
-				gintsts.b.wkupintr);
-	return;
-}
-
-void dwc_debug_core_int_mask(gintmsk_data_t gintmsk, const char* function_name)
-{
-	DWC_DEBUGPL(DBG_USER,	"Interrupt Mask status (called from %s) :\n"
-				"modemismatch: %1i     otgintr:    %1i    sofintr:    %1i    rxstsqlvl:   %1i\n"
-				"nptxfempty:   %1i     ginnakeff:  %1i    goutnakeff: %1i    ulpickint:   %1i\n"
-				"i2cintr:      %1i     erlysuspend:%1i    usbsuspend: %1i    usbreset:    %1i\n"
-				"enumdone:     %1i     isooutdrop: %1i    eopframe:   %1i    restoredone: %1i\n"
-				"epmismatch:   %1i     inepintr:   %1i    outepintr:  %1i    incomplisoin:%1i\n"
-				"incomplisoout:%1i     fetsusp:    %1i    resetdet:   %1i    portintr:    %1i\n"
-				"hcintr:       %1i     ptxfempty:  %1i    lpmtranrcvd:%1i    conidstschng:%1i\n"
-				"disconnect:   %1i     sessreqintr:%1i    wkupintr:   %1i\n",
-				function_name,
-				gintmsk.b.modemismatch,
-				gintmsk.b.otgintr,
-				gintmsk.b.sofintr,
-				gintmsk.b.rxstsqlvl,
-				gintmsk.b.nptxfempty,
-				gintmsk.b.ginnakeff,
-				gintmsk.b.goutnakeff,
-				gintmsk.b.ulpickint,
-				gintmsk.b.i2cintr,
-				gintmsk.b.erlysuspend,
-				gintmsk.b.usbsuspend,
-				gintmsk.b.usbreset,
-				gintmsk.b.enumdone,
-				gintmsk.b.isooutdrop,
-				gintmsk.b.eopframe,
-				gintmsk.b.restoredone,
-				gintmsk.b.epmismatch,
-				gintmsk.b.inepintr,
-				gintmsk.b.outepintr,
-				gintmsk.b.incomplisoin,
-				gintmsk.b.incomplisoout,
-				gintmsk.b.fetsusp,
-				gintmsk.b.resetdet,
-				gintmsk.b.portintr,
-				gintmsk.b.hcintr,
-				gintmsk.b.ptxfempty,
-				gintmsk.b.lpmtranrcvd,
-				gintmsk.b.conidstschng,
-				gintmsk.b.disconnect,
-				gintmsk.b.sessreqintr,
-				gintmsk.b.wkupintr);
-	return;
-}
-
-void dwc_debug_otg_int(gotgint_data_t gotgint, const char* function_name)
-{
-	DWC_DEBUGPL(DBG_USER,	"otg int register (from %s function):\n"
-				"sesenddet:%1i    sesreqsucstschung:%2i    hstnegsucstschng:%1i\n"
-				"hstnegdet:%1i    adevtoutchng:     %2i    debdone:         %1i\n"
-				"mvic:     %1i\n",
-				function_name,
-				gotgint.b.sesenddet,
-				gotgint.b.sesreqsucstschng,
-				gotgint.b.hstnegsucstschng,
-				gotgint.b.hstnegdet,
-				gotgint.b.adevtoutchng,
-				gotgint.b.debdone,
-				gotgint.b.mvic);
-
-	return;
-}
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h b/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h
deleted file mode 100755
index ca17379..0000000
--- a/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef __DWC_OTG_MPHI_FIX_H__
-#define __DWC_OTG_MPHI_FIX_H__
-#define FIQ_WRITE(_addr_,_data_) (*(volatile uint32_t *) (_addr_) = (_data_))
-#define FIQ_READ(_addr_) (*(volatile uint32_t *) (_addr_))
-
-typedef struct {
-	volatile void* base;
-	volatile void* ctrl;
-	volatile void* outdda;
-	volatile void* outddb;
-	volatile void* intstat;
-} mphi_regs_t;
-
-void dwc_debug_print_core_int_reg(gintsts_data_t gintsts, const char* function_name);
-void dwc_debug_core_int_mask(gintsts_data_t gintmsk, const char* function_name);
-void dwc_debug_otg_int(gotgint_data_t gotgint, const char* function_name);
-
-extern gintsts_data_t gintsts_saved;
-
-#ifdef DEBUG
-#define DWC_DBG_PRINT_CORE_INT(_arg_) dwc_debug_print_core_int_reg(_arg_,__func__)
-#define DWC_DBG_PRINT_CORE_INT_MASK(_arg_) dwc_debug_core_int_mask(_arg_,__func__)
-#define DWC_DBG_PRINT_OTG_INT(_arg_) dwc_debug_otg_int(_arg_,__func__)
-
-#else
-#define DWC_DBG_PRINT_CORE_INT(_arg_)
-#define DWC_DBG_PRINT_CORE_INT_MASK(_arg_)
-#define DWC_DBG_PRINT_OTG_INT(_arg_)
-
-#endif
-
-typedef enum {
-	FIQDBG_SCHED = (1 << 0),
-	FIQDBG_INT   = (1 << 1),
-	FIQDBG_ERR   = (1 << 2),
-	FIQDBG_PORTHUB = (1 << 3),
-} FIQDBG_T;
-
-void _fiq_print(FIQDBG_T dbg_lvl, char *fmt, ...);
-#ifdef FIQ_DEBUG
-#define fiq_print _fiq_print
-#else
-#define fiq_print(x, y, ...)
-#endif
-
-extern bool fiq_fix_enable, nak_holdoff_enable, fiq_split_enable;
-
-#endif
diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
index 5d310df..4b32941 100644
--- a/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
@@ -59,6 +59,8 @@
 #include "dwc_otg_driver.h"
 #include "dwc_otg_dbg.h"
 
+extern bool fiq_enable;
+
 static struct gadget_wrapper {
 	dwc_otg_pcd_t *pcd;
 
@@ -1222,13 +1224,13 @@ int pcd_init(dwc_bus_dev_t *_dev)
 	 */
 #ifdef PLATFORM_INTERFACE
 	DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
-                    platform_get_irq(_dev, 0));
-	retval = request_irq(platform_get_irq(_dev, 0), dwc_otg_pcd_irq,
+                    platform_get_irq(_dev, fiq_enable ? 0 : 1));
+	retval = request_irq(platform_get_irq(_dev, fiq_enable ? 0 : 1), dwc_otg_pcd_irq,
 			     IRQF_SHARED, gadget_wrapper->gadget.name,
 			     otg_dev->pcd);
 	if (retval != 0) {
 		DWC_ERROR("request of irq%d failed\n",
-                          platform_get_irq(_dev, 0));
+                          platform_get_irq(_dev, fiq_enable ? 0 : 1));
 		free_wrapper(gadget_wrapper);
 		return -EBUSY;
 	}
-- 
1.9.1