openwrtv4/target/linux/bcm53xx/patches-4.3/049-clk-iproc-Separate-status-and-control-variables.patch

320 lines
11 KiB
Diff
Raw Normal View History

From eeb32564795a3584dba6281f445ff2aa552be36b Mon Sep 17 00:00:00 2001
From: Jon Mason <jonmason@broadcom.com>
Date: Thu, 15 Oct 2015 15:48:30 -0400
Subject: [PATCH 49/50] clk: iproc: Separate status and control variables
Some PLLs have separate registers for Status and Control. The means the
pll_base needs to be split into 2 new variables, so that those PLLs can
specify device tree registers for those independently. Also, add a new
driver flag to identify this presence of the split, and let the driver
know that additional registers need to be used.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
---
drivers/clk/bcm/clk-iproc-pll.c | 96 ++++++++++++++++++++++++-----------------
drivers/clk/bcm/clk-iproc.h | 6 +++
2 files changed, 62 insertions(+), 40 deletions(-)
--- a/drivers/clk/bcm/clk-iproc-pll.c
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -74,7 +74,8 @@ struct iproc_clk {
};
struct iproc_pll {
- void __iomem *pll_base;
+ void __iomem *status_base;
+ void __iomem *control_base;
void __iomem *pwr_base;
void __iomem *asiu_base;
@@ -127,7 +128,7 @@ static int pll_wait_for_lock(struct ipro
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
for (i = 0; i < LOCK_DELAY; i++) {
- u32 val = readl(pll->pll_base + ctrl->status.offset);
+ u32 val = readl(pll->status_base + ctrl->status.offset);
if (val & (1 << ctrl->status.shift))
return 0;
@@ -145,7 +146,7 @@ static void iproc_pll_write(const struct
writel(val, base + offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK &&
- base == pll->pll_base))
+ (base == pll->status_base || base == pll->control_base)))
val = readl(base + offset);
}
@@ -161,9 +162,9 @@ static void __pll_disable(struct iproc_p
}
if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
- val = readl(pll->pll_base + ctrl->aon.offset);
+ val = readl(pll->control_base + ctrl->aon.offset);
val |= (bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
- iproc_pll_write(pll, pll->pll_base, ctrl->aon.offset, val);
+ iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
}
if (pll->pwr_base) {
@@ -184,9 +185,9 @@ static int __pll_enable(struct iproc_pll
u32 val;
if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
- val = readl(pll->pll_base + ctrl->aon.offset);
+ val = readl(pll->control_base + ctrl->aon.offset);
val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
- iproc_pll_write(pll, pll->pll_base, ctrl->aon.offset, val);
+ iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
}
if (pll->pwr_base) {
@@ -213,9 +214,9 @@ static void __pll_put_in_reset(struct ip
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
- val = readl(pll->pll_base + reset->offset);
+ val = readl(pll->control_base + reset->offset);
val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift);
- iproc_pll_write(pll, pll->pll_base, reset->offset, val);
+ iproc_pll_write(pll, pll->control_base, reset->offset, val);
}
static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
@@ -226,17 +227,17 @@ static void __pll_bring_out_reset(struct
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
- val = readl(pll->pll_base + dig_filter->offset);
+ val = readl(pll->control_base + dig_filter->offset);
val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
ka << dig_filter->ka_shift;
- iproc_pll_write(pll, pll->pll_base, dig_filter->offset, val);
+ iproc_pll_write(pll, pll->control_base, dig_filter->offset, val);
- val = readl(pll->pll_base + reset->offset);
+ val = readl(pll->control_base + reset->offset);
val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
- iproc_pll_write(pll, pll->pll_base, reset->offset, val);
+ iproc_pll_write(pll, pll->control_base, reset->offset, val);
}
static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
@@ -291,9 +292,9 @@ static int pll_set_rate(struct iproc_clk
/* put PLL in reset */
__pll_put_in_reset(pll);
- iproc_pll_write(pll, pll->pll_base, ctrl->vco_ctrl.u_offset, 0);
+ iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0);
- val = readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
+ val = readl(pll->control_base + ctrl->vco_ctrl.l_offset);
if (rate >= VCO_LOW && rate < VCO_MID)
val |= (1 << PLL_VCO_LOW_SHIFT);
@@ -303,29 +304,29 @@ static int pll_set_rate(struct iproc_clk
else
val |= (1 << PLL_VCO_HIGH_SHIFT);
- iproc_pll_write(pll, pll->pll_base, ctrl->vco_ctrl.l_offset, val);
+ iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.l_offset, val);
/* program integer part of NDIV */
- val = readl(pll->pll_base + ctrl->ndiv_int.offset);
+ val = readl(pll->control_base + ctrl->ndiv_int.offset);
val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
val |= vco->ndiv_int << ctrl->ndiv_int.shift;
- iproc_pll_write(pll, pll->pll_base, ctrl->ndiv_int.offset, val);
+ iproc_pll_write(pll, pll->control_base, ctrl->ndiv_int.offset, val);
/* program fractional part of NDIV */
if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
- val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
+ val = readl(pll->control_base + ctrl->ndiv_frac.offset);
val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
ctrl->ndiv_frac.shift);
val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
- iproc_pll_write(pll, pll->pll_base, ctrl->ndiv_frac.offset,
+ iproc_pll_write(pll, pll->control_base, ctrl->ndiv_frac.offset,
val);
}
/* program PDIV */
- val = readl(pll->pll_base + ctrl->pdiv.offset);
+ val = readl(pll->control_base + ctrl->pdiv.offset);
val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
val |= vco->pdiv << ctrl->pdiv.shift;
- iproc_pll_write(pll, pll->pll_base, ctrl->pdiv.offset, val);
+ iproc_pll_write(pll, pll->control_base, ctrl->pdiv.offset, val);
__pll_bring_out_reset(pll, kp, ka, ki);
@@ -372,7 +373,7 @@ static unsigned long iproc_pll_recalc_ra
return 0;
/* PLL needs to be locked */
- val = readl(pll->pll_base + ctrl->status.offset);
+ val = readl(pll->status_base + ctrl->status.offset);
if ((val & (1 << ctrl->status.shift)) == 0) {
clk->rate = 0;
return 0;
@@ -383,19 +384,19 @@ static unsigned long iproc_pll_recalc_ra
*
* ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv)
*/
- val = readl(pll->pll_base + ctrl->ndiv_int.offset);
+ val = readl(pll->control_base + ctrl->ndiv_int.offset);
ndiv_int = (val >> ctrl->ndiv_int.shift) &
bit_mask(ctrl->ndiv_int.width);
ndiv = ndiv_int << 20;
if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
- val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
+ val = readl(pll->control_base + ctrl->ndiv_frac.offset);
ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
bit_mask(ctrl->ndiv_frac.width);
ndiv += ndiv_frac;
}
- val = readl(pll->pll_base + ctrl->pdiv.offset);
+ val = readl(pll->control_base + ctrl->pdiv.offset);
pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
clk->rate = (ndiv * parent_rate) >> 20;
@@ -460,14 +461,14 @@ static int iproc_clk_enable(struct clk_h
u32 val;
/* channel enable is active low */
- val = readl(pll->pll_base + ctrl->enable.offset);
+ val = readl(pll->control_base + ctrl->enable.offset);
val &= ~(1 << ctrl->enable.enable_shift);
- iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
+ iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
/* also make sure channel is not held */
- val = readl(pll->pll_base + ctrl->enable.offset);
+ val = readl(pll->control_base + ctrl->enable.offset);
val &= ~(1 << ctrl->enable.hold_shift);
- iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
+ iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
return 0;
}
@@ -482,9 +483,9 @@ static void iproc_clk_disable(struct clk
if (ctrl->flags & IPROC_CLK_AON)
return;
- val = readl(pll->pll_base + ctrl->enable.offset);
+ val = readl(pll->control_base + ctrl->enable.offset);
val |= 1 << ctrl->enable.enable_shift;
- iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
+ iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
}
static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
@@ -499,7 +500,7 @@ static unsigned long iproc_clk_recalc_ra
if (parent_rate == 0)
return 0;
- val = readl(pll->pll_base + ctrl->mdiv.offset);
+ val = readl(pll->control_base + ctrl->mdiv.offset);
mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width);
if (mdiv == 0)
mdiv = 256;
@@ -546,14 +547,14 @@ static int iproc_clk_set_rate(struct clk
if (div > 256)
return -EINVAL;
- val = readl(pll->pll_base + ctrl->mdiv.offset);
+ val = readl(pll->control_base + ctrl->mdiv.offset);
if (div == 256) {
val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
} else {
val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
val |= div << ctrl->mdiv.shift;
}
- iproc_pll_write(pll, pll->pll_base, ctrl->mdiv.offset, val);
+ iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val);
clk->rate = parent_rate / div;
return 0;
@@ -578,9 +579,10 @@ static void iproc_pll_sw_cfg(struct ipro
if (ctrl->flags & IPROC_CLK_PLL_NEEDS_SW_CFG) {
u32 val;
- val = readl(pll->pll_base + ctrl->sw_ctrl.offset);
+ val = readl(pll->control_base + ctrl->sw_ctrl.offset);
val |= BIT(ctrl->sw_ctrl.shift);
- iproc_pll_write(pll, pll->pll_base, ctrl->sw_ctrl.offset, val);
+ iproc_pll_write(pll, pll->control_base, ctrl->sw_ctrl.offset,
+ val);
}
}
@@ -615,8 +617,8 @@ void __init iproc_pll_clk_setup(struct d
if (WARN_ON(!pll->clks))
goto err_clks;
- pll->pll_base = of_iomap(node, 0);
- if (WARN_ON(!pll->pll_base))
+ pll->control_base = of_iomap(node, 0);
+ if (WARN_ON(!pll->control_base))
goto err_pll_iomap;
/* Some SoCs do not require the pwr_base, thus failing is not fatal */
@@ -629,6 +631,16 @@ void __init iproc_pll_clk_setup(struct d
goto err_asiu_iomap;
}
+ if (pll_ctrl->flags & IPROC_CLK_PLL_SPLIT_STAT_CTRL) {
+ /* Some SoCs have a split status/control. If this does not
+ * exist, assume they are unified.
+ */
+ pll->status_base = of_iomap(node, 2);
+ if (!pll->status_base)
+ goto err_status_iomap;
+ } else
+ pll->status_base = pll->control_base;
+
/* initialize and register the PLL itself */
pll->ctrl = pll_ctrl;
@@ -699,6 +711,10 @@ err_clk_register:
clk_unregister(pll->clk_data.clks[i]);
err_pll_register:
+ if (pll->status_base != pll->control_base)
+ iounmap(pll->status_base);
+
+err_status_iomap:
if (pll->asiu_base)
iounmap(pll->asiu_base);
@@ -706,7 +722,7 @@ err_asiu_iomap:
if (pll->pwr_base)
iounmap(pll->pwr_base);
- iounmap(pll->pll_base);
+ iounmap(pll->control_base);
err_pll_iomap:
kfree(pll->clks);
--- a/drivers/clk/bcm/clk-iproc.h
+++ b/drivers/clk/bcm/clk-iproc.h
@@ -55,6 +55,12 @@
#define IPROC_CLK_EMBED_PWRCTRL BIT(5)
/*
+ * Some PLLs have separate registers for Status and Control. Identify this to
+ * let the driver know if additional registers need to be used
+ */
+#define IPROC_CLK_PLL_SPLIT_STAT_CTRL BIT(6)
+
+/*
* Parameters for VCO frequency configuration
*
* VCO frequency =