openwrtv4/package/kernel/mac80211/patches/652-0045-rtl8xxxu-Implement-rtl8188eu_config_channel.patch

From b3ce6298eb09b26c5abbc5dca8c8dfa18f41ea12 Mon Sep 17 00:00:00 2001
From: Jes Sorensen <Jes.Sorensen@redhat.com>
Date: Thu, 18 Aug 2016 12:20:31 -0400
Subject: [PATCH] rtl8xxxu: Implement rtl8188eu_config_channel()

The 8188eu doesn't seem to have REG_FPGA0_ANALOG2

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
---
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 118 ++++++++++++++++++++-
 1 file changed, 117 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
@@ -345,6 +345,122 @@ rtl8188e_set_tx_power(struct rtl8xxxu_pr
 	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs);
 }
 
+void rtl8188eu_config_channel(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	u32 val32, rsr;
+	u8 val8, opmode;
+	bool ht = true;
+	int sec_ch_above, channel;
+	int i;
+
+	opmode = rtl8xxxu_read8(priv, REG_BW_OPMODE);
+	rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
+	channel = hw->conf.chandef.chan->hw_value;
+
+	switch (hw->conf.chandef.width) {
+	case NL80211_CHAN_WIDTH_20_NOHT:
+		ht = false;
+	case NL80211_CHAN_WIDTH_20:
+		opmode |= BW_OPMODE_20MHZ;
+		rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 &= ~FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+		val32 &= ~FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		if (hw->conf.chandef.center_freq1 >
+		    hw->conf.chandef.chan->center_freq) {
+			sec_ch_above = 1;
+			channel += 2;
+		} else {
+			sec_ch_above = 0;
+			channel -= 2;
+		}
+
+		opmode &= ~BW_OPMODE_20MHZ;
+		rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
+		rsr &= ~RSR_RSC_BANDWIDTH_40M;
+		if (sec_ch_above)
+			rsr |= RSR_RSC_UPPER_SUB_CHANNEL;
+		else
+			rsr |= RSR_RSC_LOWER_SUB_CHANNEL;
+		rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, rsr);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 |= FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+		val32 |= FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+
+		/*
+		 * Set Control channel to upper or lower. These settings
+		 * are required only for 40MHz
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
+		val32 &= ~CCK0_SIDEBAND;
+		if (!sec_ch_above)
+			val32 |= CCK0_SIDEBAND;
+		rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
+		val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */
+		if (sec_ch_above)
+			val32 |= OFDM_LSTF_PRIME_CH_LOW;
+		else
+			val32 |= OFDM_LSTF_PRIME_CH_HIGH;
+		rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
+		val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL);
+		if (sec_ch_above)
+			val32 |= FPGA0_PS_UPPER_CHANNEL;
+		else
+			val32 |= FPGA0_PS_LOWER_CHANNEL;
+		rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
+		break;
+
+	default:
+		break;
+	}
+
+	for (i = RF_A; i < priv->rf_paths; i++) {
+		val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
+		val32 &= ~MODE_AG_CHANNEL_MASK;
+		val32 |= channel;
+		rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
+	}
+
+	if (ht)
+		val8 = 0x0e;
+	else
+		val8 = 0x0a;
+
+#if 0
+	rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8);
+	rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8);
+
+	rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808);
+	rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a);
+#endif
+
+	for (i = RF_A; i < priv->rf_paths; i++) {
+		val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
+		if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+			val32 &= ~MODE_AG_CHANNEL_20MHZ;
+		else
+			val32 |= MODE_AG_CHANNEL_20MHZ;
+		rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
+	}
+}
+
 void rtl8188eu_init_aggregation(struct rtl8xxxu_priv *priv)
 {
 	u8 agg_ctrl, usb_spec;
@@ -1118,7 +1234,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
 	.init_phy_bb = rtl8188eu_init_phy_bb,
 	.init_phy_rf = rtl8188eu_init_phy_rf,
 	.phy_iq_calibrate = rtl8188eu_phy_iq_calibrate,
-	.config_channel = rtl8xxxu_gen1_config_channel,
+	.config_channel = rtl8188eu_config_channel,
 	.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
 	.init_aggregation = rtl8188eu_init_aggregation,
 	.enable_rf = rtl8188e_enable_rf,