openwrtv4/target/linux/mvebu/patches-4.14/525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch

144 lines
5.3 KiB
Diff
Raw Normal View History

mvebu: new subtarget cortex A53 This commit introduces new subtarget for Marvell EBU Armada Cortex A53 processor based devices. The first device is Globalscale ESPRESSObin. Some hardware specs: SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz RAM: 512MB, 1GB or 2GB DDR3 Storage: SATA interface µSD card slot with footprint for an optional 4GB EMMC 4MB SPI NOR flash for bootloader Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports Connectors: USB 3.0 USB 2.0 µUSB port connected to PL2303SA (USB to serial bridge controller) for UART access Expansion: 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, SPI, MMC, etc MiniPCIe slot Misc: Reset button, JTAG interface Currently booting only from µSD card is supported. The boards depending on date of dispatch can come with various U-Boot versions. For the newest version 2017.03-armada-17.10 no manual intervention should be needed to boot OpenWrt image. For the older ones it's necessary to modify default U-Boot environment: 1. Interrupt boot process to run U-Boot command line, 2. Run following commands: (for version 2017.03-armada-17.06 and 2017.03-armada-17.08) setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000" saveenv (for version 2015.01-armada-17.02 and 2015.01-armada-17.04) setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait" setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}" saveenv 3. Poweroff, insert SD card with OpenWrt image, boot and enjoy. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
From patchwork Thu Sep 28 12:58:35 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v2,
4/7] PCI: aardvark: use isr1 instead of isr0 interrupt in legacy irq
mode
X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
X-Patchwork-Id: 819592
Message-Id: <20170928125838.11887-5-thomas.petazzoni@free-electrons.com>
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement
<gregory.clement@free-electrons.com>,
Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>,
Yehuda Yitschak <yehuday@marvell.com>,
linux-arm-kernel@lists.infradead.org, Antoine Tenart
<antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?=
<miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Thu, 28 Sep 2017 14:58:35 +0200
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
List-Id: <linux-pci.vger.kernel.org>
From: Victor Gu <xigu@marvell.com>
The Aardvark has two interrupts sets:
- first set is bit[23:16] of PCIe ISR 0 register(RD0074840h)
- second set is bit[11:8] of PCIe ISR 1 register(RD0074848h)
Only one set should be used, while another set should be masked.
The second set, ISR1, is more advanced, the Legacy INT_X status bit is
asserted once Assert_INTX message is received, and de-asserted after
Deassert_INTX message is received. Therefore, it matches what the
driver is currently doing in the ->irq_mask() and ->irq_unmask()
functions. The ISR0 requires additional work to deassert the
interrupt, which the driver doesn't do currently.
This commit resolves a number of issues with legacy interrupts.
This is part of fixing bug
https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was
reported as the user to be important to get a Intel 7260 mini-PCIe
WiFi card working.
Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Victor Gu <xigu@marvell.com>
Reviewed-by: Evan Wang <xswang@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
drivers/pci/host/pci-aardvark.c | 41 ++++++++++++++++++++++++-----------------
1 file changed, 24 insertions(+), 17 deletions(-)
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -105,7 +105,8 @@
#define PCIE_ISR1_MASK_REG (CONTROL_BASE_ADDR + 0x4C)
#define PCIE_ISR1_POWER_STATE_CHANGE BIT(4)
#define PCIE_ISR1_FLUSH BIT(5)
-#define PCIE_ISR1_ALL_MASK GENMASK(5, 4)
+#define PCIE_ISR1_INTX_ASSERT(val) BIT(8 + (val))
+#define PCIE_ISR1_ALL_MASK GENMASK(11, 4)
#define PCIE_MSI_ADDR_LOW_REG (CONTROL_BASE_ADDR + 0x50)
#define PCIE_MSI_ADDR_HIGH_REG (CONTROL_BASE_ADDR + 0x54)
#define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58)
@@ -615,9 +616,9 @@ static void advk_pcie_irq_mask(struct ir
irq_hw_number_t hwirq = irqd_to_hwirq(d);
u32 mask;
- mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
- mask |= PCIE_ISR0_INTX_ASSERT(hwirq);
- advk_writel(pcie, mask, PCIE_ISR0_MASK_REG);
+ mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
+ mask |= PCIE_ISR1_INTX_ASSERT(hwirq);
+ advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
}
static void advk_pcie_irq_unmask(struct irq_data *d)
@@ -626,9 +627,9 @@ static void advk_pcie_irq_unmask(struct
irq_hw_number_t hwirq = irqd_to_hwirq(d);
u32 mask;
- mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
- mask &= ~PCIE_ISR0_INTX_ASSERT(hwirq);
- advk_writel(pcie, mask, PCIE_ISR0_MASK_REG);
+ mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
+ mask &= ~PCIE_ISR1_INTX_ASSERT(hwirq);
+ advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
}
static int advk_pcie_irq_map(struct irq_domain *h,
@@ -771,29 +772,35 @@ static void advk_pcie_handle_msi(struct
static void advk_pcie_handle_int(struct advk_pcie *pcie)
{
- u32 val, mask, status;
+ u32 isr0_val, isr0_mask, isr0_status;
+ u32 isr1_val, isr1_mask, isr1_status;
int i, virq;
- val = advk_readl(pcie, PCIE_ISR0_REG);
- mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
- status = val & ((~mask) & PCIE_ISR0_ALL_MASK);
-
- if (!status) {
- advk_writel(pcie, val, PCIE_ISR0_REG);
+ isr0_val = advk_readl(pcie, PCIE_ISR0_REG);
+ isr0_mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+ isr0_status = isr0_val & ((~isr0_mask) & PCIE_ISR0_ALL_MASK);
+
+ isr1_val = advk_readl(pcie, PCIE_ISR1_REG);
+ isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
+ isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
+
+ if (!isr0_status && !isr1_status) {
+ advk_writel(pcie, isr0_val, PCIE_ISR0_REG);
+ advk_writel(pcie, isr1_val, PCIE_ISR1_REG);
return;
}
/* Process MSI interrupts */
- if (status & PCIE_ISR0_MSI_INT_PENDING)
+ if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
advk_pcie_handle_msi(pcie);
/* Process legacy interrupts */
for (i = 0; i < PCI_NUM_INTX; i++) {
- if (!(status & PCIE_ISR0_INTX_ASSERT(i)))
+ if (!(isr1_status & PCIE_ISR1_INTX_ASSERT(i)))
continue;
- advk_writel(pcie, PCIE_ISR0_INTX_ASSERT(i),
- PCIE_ISR0_REG);
+ advk_writel(pcie, PCIE_ISR1_INTX_ASSERT(i),
+ PCIE_ISR1_REG);
virq = irq_find_mapping(pcie->irq_domain, i);
generic_handle_irq(virq);