Enrique Giraldo fefdb1e0b9 ar71xx: add support for COMFAST CF-E355AC ... COMFAST CF-E355AC is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9531 + QCA9882. Short specification: - 2x 10/100 Mbps Ethernet, with PoE support - 64MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, 802.11b/g/n - 2T2R 5 GHz, 802.11ac/n/a - built-in 4x 3 dBi antennas - output power (max): 500 mW (27 dBm) - 1x RGB LED, 1x button - built-in watchdog chipset Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Enrique Giraldo <enrique.giraldo@galgus.net> [whitespace fixes, ac radio caldata offset fix] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2017-09-10 22:15:03 +02:00
..
lzma-loader	ar71xx/lzma-loader: fix O32 ABI conformance	2016-01-17 15:29:03 +00:00
generic.mk	ar71xx: add support for COMFAST CF-E355AC	2017-09-10 22:15:03 +02:00
legacy-devices.mk	ar71xx: move Arduino Yun to generic building code	2017-06-29 10:37:36 +02:00
legacy.mk	ar71xx: move Arduino Yun to generic building code	2017-06-29 10:37:36 +02:00
Makefile	ar71xx: image: use simply expanded variables	2017-06-11 21:32:17 +02:00
mikrotik.mk	ar71xx: image: mikrotik: shorten DEVICE_TITLE	2017-06-11 21:32:17 +02:00
nand.mk	ar71xx: image: use simply expanded variables	2017-06-11 21:32:17 +02:00
senao.mk	ar71xx: fix EnGenius ENS202EXT mtd definition	2017-06-29 10:37:36 +02:00
tp-link.mk	ar71xx: image: use tplink-v1-header in place of mktplinkfw-kernel	2017-07-22 23:29:50 +02:00
ubinize-nbg6716.ini	ar71xx: nbg6716: Enable procd nand sysupgrage	2014-06-26 11:43:38 +00:00
ubinize-wndr4300.ini	ar71xx: remove old jffs2 marker from image generation on nand targets	2014-06-24 18:14:18 +00:00
ubnt.mk	ar71xx/image: change unifi UBNT_CHIP to ar7240	2017-07-13 23:56:24 +02:00